Paradyne 316x manual Aborting Test Patterns, Starting a Lamp Test, Abort Send or Mon

ACCULINK 316x DSU/CSU

Aborting Test Patterns

Use the Abort command to stop all test patterns or any selected test pattern active on the DSU/CSU.

To abort test patterns,

1.Press F2 to select Test from the top-level menu screen.

DSU ESF

Stat Test Cnfig

F1 F2 F3

2. From the Test screen, press F3 to select Ptrns.

Test:

Rlpbk Lpbk Ptrns

F1 F2 F3

3. From the Patterns screen, press F1 to select Abort.

Patterns:

Abort Send Mon

F1 F2 F3

4.From the Patterns Abort screen, press the desired function key to abort either All active test patterns, active Send test patterns, or the active Monitor (Mon) test pattern.

Patterns: Abort

All Send Mon

F1 F2 F3

If you select All, the DSU/CSU terminates all active test patterns and displays the message Command Complete. Skip Step 5.

NOTE

Be careful when selecting a specific test pattern to abort. If you mistakenly choose to abort a test pattern that is not currently running, a Command Complete message still displays and the test pattern currently active still runs. You can use the TStat branch of the menu to view the test status to determine if the abort was successful.

5.From the Abort screen, press the function key that corresponds to the network or port for which you want to abort a test pattern. Use the scroll keys, if necessary.

Abort: Send or Mon

NET Prt1 Prt2

F1 F2 F3

The DSU/CSU terminates the selected test pattern and displays the message Command Complete.

Lamp Test

Use the Lamp Test commands to start and stop a test of the DSU/CSU front panel LEDs. This feature is only available from the front panel.

Starting a Lamp Test

To start a Lamp test,

1.Press F2 to select Test from the top-level menu screen.

DSU ESF

Stat Test Cnfig

F1 F2 F3

4-14 December 1996 3160-A2-GB22-10