Paradyne 316x manual Specifying the Community Names and Access Types

Operation

2.Select the configuration option set to be copied into the Edit area by using the appropriate function key. Use the scroll keys, if necessary.

Load from:
Activ	Cust	Fact1
F1	F2	F3

3. Press F1 to select Edit.

Choose Funct:

Edit Save

F1 F2 F3

4.Press the key from the Edit screen to display the SNMP selection.

Edit:

DTE Port NET

F1 F2 F3

5. Press F3 to select SNMP.

Edit:
User	Alarm	SNMP
F1	F2	F3

6.Press F1 to select Gen from the SNMP Config screen.

SNMP Config:

Gen Trap

F1 F2 F3

7.Press the F1 (Next) key until the Modem Link configuration option appears.

System Name:

Next Edit Clear

F1 F2 F3

8. Press F2 (PPP) or F3 (SLIP).

Modem Link:

Next PPP SLIP

F1 F2 F3

Differences Using the Async Terminal: To set the Link Layer Protocol, select Modem & Communication Port Options from the main/configuration/edit/snmp menu.

(See Figure 3-22 for an example of the screen that appears.)

Specifying the Community Name(s) and Access Type(s)

You have the capability of specifying up to two community names (community name 1 and community name 2) to be used by external SNMP managers when trying to access objects in the DSU/CSU's MIB. Once you specify the community name(s), you must then specify the type of access to the MIB that SNMP managers in the community are permitted to have.

To specify the community name 1 and its access type,

1.Press F3 to select Cnfig from the top-level menu screen.

DSU ESF

Stat Test Cnfig

F1 F2 F3

3160-A2-GB22-10 December 1996 3-29