Paradyne 316x manual Configuring for External Timing Example, Clock SrcNET Prt1 Int Ext

Operation

Configuring for External Timing Example

To configure network timing,

1.Press F3 to select Cnfig from the top-level menu screen.

DSU ESF

Stat Test Cnfig

F1 F2 F3

2.Select the configuration option set to be copied into the Edit area by using the appropriate function key. Use the scroll keys, if necessary.

Load from:
Activ	Cust	Fact1
F1	F2	F3

3. Press F1 to select Edit.

Choose Funct:

Edit Save

F1 F2 F3

4.From the Edit screen, press the key twice to bring the Gen selection onto the screen.

Edit:

DTE Port NET

F1 F2 F3

5.Press F3 to select Gen for the general configuration options.

Edit:

NET Chan Gen

F1 F2 F3

6.The Generate Yellow Alarm configuration option displays first. Press F1 (next) once to display the DSU/CSU Clock Source configuration option.

GenYellow:Enab

Next Enab Disab

F1 F2 F3

7.Select the master clock source. For external, press

the key three times to scroll the Ext selection onto the screen.

Clock Src:NET

Next NET DTE

F1 F2 F3

8. Press F3 to select external timing.

Clock Src:NET

Prt1 Int Ext

F1 F2 F3

9.Select the appropriate external clock rate by pressing the corresponding Function key. This step is mandatory if you have chosen external clocking.

Clock Rate:1544

Next	2048	1544
F1	F2	F3

Differences Using the Async Terminal: To configure network timing, select General from the main/ configuration/edit menu.

3160-A2-GB22-10 December 1996 3-51