DTE Assignment Screen, Rbs | Paradyne 316x guide

Operation

Differences Using the Async Terminal: To allocate DS0 channels from the DSX-1 Drop/Insert T1 interface to the Network interface, select DTE Assign from the main/configuration/edit/channel menu. Figure 3-30 shows an example of the DTE Assignment screen.

Customer ID: New Cust		main/configuration/edit/channel/dte_assign
		Model: ACCULINK XXXX
		DTE Assign
N1: Prt1		N7: D7	N13: D13			N19: D19
N2: Prt1		N8: D8	N14: D14			N20: D20
N3: Prt1		N9: D9	N15: D15			N21: D21
N4: D4	N10: D10		N16: D16			N22: Prt3
N5: D5	N11: D11		N17:			N23: Prt3
N6: D6	N12: D12		N18: D18			N24: Prt3

Save Edit Main Previous Cntrl±x to Disconnect

Figure 3-30. DTE Assignment Screen

To specify DSX-1 Drop/Insert channels used to carry voice information,

1.Press from the channel allocation screen to return to the DTE Channels screen.

N1	N2	N3
D1	D2	±
F1	F2	F3

2.From the DTE Channels screen, press F2 to select Voice.

DTE Channels:

Assign Voice

F1 F2 F3

3.Press the Function key below the network channel desired. Line 1 displays the 24 DS0 channels for the DSX-1 Drop/Insert T1 interface. These channels scroll onto the LCD three at a time each

time that the or key is pressed. Line 2 displays whether the DS0 channel in Line 1 is a data channel ``Dataº or a voice ``RBSº channel. Each time that you press the Function key located below the desired channel, the display in Line 2 toggles between Data and RBS.

D1	D2	D3
RBS	RBS	RBS
F1	F2	F3

Differences Using the Async Terminal: To specify DSX-1 Drop/Insert channels used to carry voice information, select DTE Voice from the main/configuration/edit/channel menu. Figure 3-31 shows an example of the DTE Voice Assignment screen.

main/configuration/edit/channel/dte_voice

Customer ID: New Cust Model: ACCULINK XXXX
	DTE Voice
D1: Data	D7: Data	D13: Data	D19: RBS
D2: Data	D8: Data	D14: Data	D20: RBS
D3: Data	D9: Data	D15: Data	D21: RBS
D4: RBS	D10: RBS	D16: Data	D22: Data
D5: RBS	D11: RBS	D17: Data	D23: Data
D6: RBS	D12: RBS	D18: Data	D24: Data

Save Edit Main Previous Cntrl±x to Disconnect

Figure 3-31. DTE Voice Assignment Screen

3160-A2-GB22-10

December 1996

3-47

Image 89

Paradyne 316x manual DTE Assignment Screen, Rbs

Contents

Channel Service Unit Includes Terminal User Interface Trademarks Warranty, Sales, and Service InformationOperators Guide 3160-A2-GB22-10 Copyright E 1996 Paradyne Corporation. All rights reserved Important Safety Instructions CC DGD D C D CC 316x DSU/CSU Facility Interface Codes Description Government Requirements and Equipment ReturnUnited States Canada Government Requirements Table of Contents Glossary Index LCD List of Figures Slide Latch Adapter Cable Feature Number 3100-F1-560 List of Tables Models 3160/3614 DSU/CSUs Rear Panel Connectors Acculink 316x DSU/CSU Objectives and Reader Assumptions PrefaceRelated Documents Reference Documents Overview Introduction Alarm Interface FeaturesIntegral Modem User Interface Front Panel Emulation Front Panel Access Control FeatureFront Panel Pass-Through Async Terminal Interface Support Standalone Model 3160/3164 DSU/CSUs Acculink 316x DSU/CSU Physical Description3160/3164 DSU/CSU Front Panel 3160/3164 DSU/CSU Rear Panel LCD DSU/CSU Front Panel DSU/CSU Rear Panel Function Models 3160/3164 DSU/CSUs Rear Panel ConnectorsConnector Name Model 3161 DSU/CSU Rear Panel Carrier-Mounted Model 3161 DSU/CSUModel 3161 Front Panel Functions Auxiliary Backplane Planning Installation Network Fractional T1 Serial Connection to Snmp Quick Start Procedure Box Contents Installing the +24 Vdc Power Supply Optional Power Selection ±48 Vdc Single Source Power Supply Pinouts Installing the Single ±48 Vdc Power Supply ±48 Vdc Redundant Source Power Supply Pinouts Installing the Redundant ±48 Vdc Power Supply DSU ESF Power-Up Self-Test DSU/CSU Identity Selecting a ModelStatus DevHS STest Perf Status TStat LED ID Identity Ser=xxxxxxx Control Reset CID PasswordIdentity Mod=xxxx-xx-xxx Identity Cust ID=xxxxxxxx Setting/Changing a Password Establishing Access Security on a Port Passwd Up Down Save Control Reset CID Passwd 3160/3164 DSU/CSU Cabling 13 /3164 DSU/CSU Cabling Configurations Installing Front Panel Emulation Software Factory Default Configuration Options Enabling/Disabling the Front Panel 3160/3164 DSU/CSU User Interface Access Security Security Lvl1 Lvl2 Changing User Interface Access Security LCD Operation Acculink 316x DSU/CSU Operating the Front Panel Model 3161 DSU/CSU Faceplate Other Displays Device Health and Status MessagesContext-Sensitive Menu Keypad LEDs LEDs Name Color Meaning System LEDs SIG Network Interface LEDs PDV DSX-1 Drop/Insert Port LEDs DTR Data Port LEDs DTR TXD Displaying LED Conditions on the Front Panel LED Dsply DTE Selecting the DSX-1 or a Port for LED DisplayDTE Prt1 Prt2 LED Display Selection Screen Front Panel Emulation on a PC Front Panel Emulation Screen Icons Name Meaning Test Jacks 12 DSU/CSU Test Jacks Configuration Option Areas Configuring the DSU/CSUConfiguration Options Test Jack Functions 14. Configuration Branch for the Front Panel Configuration Procedures 15. Configuration Branch for the Async Terminal Displaying/Editing Configuration Options 16. Load From Screen NET Framing ESF Next D4 ESF Save Edit to Activ Cust Saving Edit Changes Port Select Copy Prt1 Prt2 Selecting/Copying to a Specific PortSelecting a Specific Port Prt2 Value Options Prt1 Value OptionsPrt3 Value Options Prt4 Value Options Copy To All Prt1 Prt2 To Copy to One or All PortsCopy From Prt1 Prt2 Prt3 Selecting the Port Configuring the 3160/3164 DSU/CSU for Snmp Management Modem Use Next Snmp Ascii Com Use Next Snmp Ascii Setting the IP Address Snmp Config Gen Trap Edit User AlarmSnmp System Name Next Edit Clear 010.155.111.222 Up Down Save Selecting the Link Layer Protocol000.000.000.000 Up Down Save Modem Link Next PPP Slip Specifying the Community Names and Access Types Public Up Down Save CommunityName1 Next Edit Clear Snmp Traps Access Next Read R/WNewname Up Down Save Enterprise-Specific Trap Definitions Trap Value Event Num Trap Mgrs1 Next Selecting the Number of Trap Managers 23. Trap Options Screen Configuring an IP Address for Snmp Trap Manager Trap n IP Adr Next Edit Clear Configuring DS0 Channels 24. Example Channel Allocation 25. Example Interface Tables Network T1 Interface Network Channel Allocation 26. DS0 Channels Containing RBS Information Worksheet DTE Chan Assign Voice Config N1 ± RBS or Data NET, DTE Port Chan Options Value Conf Port Chan Options Value Conf Channel Config Dsply Clear DTE Display Channel Symbols MeaningDisplaying DS0 Channel Assignments Edit Port NET Chan Prt1 Display ChanNET DTE Allocating Data Ports NET Block Channel Assignment Method Example Port Rate384 Next 64 Acami Channel Assignment Method ExampleStart AtClear Next Clear N1 Assign ByACAMI Next Block Acami Assign ByChan Block Acami Chan Individual Channel Assignment Method ExampleAssign ByChan Next Block Acami Next Prt1 Prt2 DTE Channels Assign Voice RBS 30. DTE Assignment Screen Clear Channel Clearing DS0 Channel Allocation Timing 32. Common Clocking Configurations Edit NET Chan Gen Configuring for Network Timing ExampleGenYellowEnab Next Enab Disab Clock SrcNET Next NET DTE Clock Rate1544 Next 2048 Configuring for External Timing ExampleClock SrcNET Prt1 Int Ext Self±TestEnab Next Enab Disab Selecting the Shared Communication Port101 MasterComDisab Next Enab Disab Checking the StatusDevice Health and Status Description Health and Status MessagesMessage Self-Test Health Displaying Device Health and StatusDevice H/S OOF at DTE Auto Dev H/S OOF at DTE Self-Test Health Messages Displaying Self-Test ResultsMessage Description STest Health Passed Performance Report CurTimerEvent=xx,xxx VldIntvl=xx StEvnt 35. Carrier Telco and User Register Organization Displaying User Performance Registers 36. Telco Performance Report Screen Clearing User Performance Registers LED Controlling the DSU/CSU Acquiring the Active Physical Interface Acquiring/Releasing the Active Physical InterfaceReleasing the Active Physical Interface DSU Fmt Ft. Panel Released Using the Integral ModemInitiating a Call for Front Panel Pass-Through Operation Dial n Up Down Dial Call Setup Pass Dial ChDirPass n Up Down Dial Passwd Up Down Done Entering a Password to Gain Access Disconnecting Using the Disconnect Command Disconnecting the Modem ConnectionDisconnecting Using Front Panel Keys Call Setup Disc ChDir Xxxxxxxxxxxxxxxxx Next Prev Edit Entering Numbers in the Phone Directories Valid Phone Number Characters Meaning Restrictions Xxxxxxxxxxxxxxxxx Up Down Save Alarm Cut-Off Command Complete Deactivating the Alarm RelayStarting Front Panel Emulation Control ACO Rel LED Setting Interface Options Using the Async Terminal Feature Activating Interface Option Changes Entering a PasswordInitiating an Async Terminal Session Async Terminal Menus and Screens Edit and Display Screens Menu Selection Screens Function Representations for Edit Screens Function Key Usage Hard-Key Representations for Edit Screens Usage Terminating a Session Troubleshooting Maintenance Snmp Traps AlarmsSnmp Trap per Interface Interface Snmp Trap Meaning Test Branch Test Commands Sending a Line Loopback Up or Down Remote Loopback TestsTest Rlpbk Lpbk Ptrns Rem Loopback Rem Loop Type Prt1 Prt2 Prt3 Sending a V.54/ANSI FT1 Activation/DeactivationLocal Loopback Tests Loopback Abort LLB PLB Starting a Line LoopbackValid Loopback Combinations Starting a DTE Loopback Starting a Payload Loopback LLB PLB DLB Starting a Repeater LoopbackLoopback PLB DLB RLB Starting a Data Channel LoopbackDLB RLB Dclb Loopback Dclb Prt1 Prt2 Prt3 Loopback Dtlb Prt1 Prt2 Prt3 Starting a Data Terminal LoopbackRLB Dclb Dtlb Aborting Loopbacks DTE-initiated LoopbacksLoopback Abort All LLB PLB Sending Test Patterns Test Patterns 8 Network Port Monitoring Test PatternsPatterns Mon Qrss Monitor Name NET Prt1 Prt2 Lamp Test Aborting Test PatternsStarting a Lamp Test Patterns Abort All Send Mon Test Lpbk Ptrns Lamp Aborting a Lamp TestLamp Test Abort Start 0123456789 = ? Test Status Messages Displaying DSU/CSU Test Status Status STest Perf TStat Resetting the DSU/CSUDownloading Software Device Reset Yes No Control ClrUsr Reset Front Panel Menu a 3160-A2-GB22-10 Front Panel Menu Power Requirements Technical Specifications B Clocking Sources Power Consumption Dissipation Pounds .82 kg Functional Grouping Configuration Options C Context-Sensitive Menu DTE Interface Configuration OptionsTable C-1 DTE Interface Configuration Options Send Ones Enab Next Enab Disab Prev Extrn DLB Disab Next Enab Disab Prev Port Configuration Options Port Configuration OptionsTable C-2 Port Type E530 Factory Next E530 V.35 RS449 Prev Rcv Yellow Halt Next None Halt Prev Table C-2 Port Configuration OptionsAll Ones Both Next Disab DTR RTS Both Prev Invert Data Disab Next Enab Disab Prev Tx Clock Int Next Int Ext PrevInvert TxC Disab Next Enab Disab Prev Table C-3 Network Interface Configuration Options Network Interface Configuration Options Bit Stuff Next 62411 Part68 Disab Prev NET PLB Enab Next Enab Disab Prev Table C-4 DTE Channel Configuration Options Channel Configuration Options Table C-5 Data Port Channel Configuration Options N10 N11 N12 N24 Next Prev D10 D11 D12 D24 Start At Clear Next N10 N11 N24 Prev D10 D11 D24 Table C-6 General Configuration Options General Configuration OptionsGen Yellow Enab Next Enab Disab Prev Clock Src NET Next NET DTE Prt1 Int Ext Prev Table C-7 User Interface Configuration Options User Interface Configuration Options Com Use Ascii Next Snmp Ascii Term Prev MasterComDisab Next Enab Disab PrevCom Type Async Next Async Sync Prev Com Clk Int Next Int Ext Prev Char Length Next 7 8 Prev Com Rate Next 1.2 2.4 4.8 9.6 14.4 19.2 PrevCParity None Next None Even Odd Prev CStop Bits Next 1 1.5 2 Prev Modem Rate Next 1.2 2.4 Prev Modem Type Async Next Async Sync PrevMChar Len Next 7 8 Prev MParity None Next None Even Odd Prev Table C-8 Alarm Configuration Options Alarm Configuration OptionsAlrm Msg Disab Next Disab Modem Com Both Prev Snmp Trap Disab Next Enab Disab Prev DialOut Disab Next Enab Disab Prev Dial Delay Next 1 2 3 4 5 6 7 8 9 10 PrevCall Retry Disab Next Enab Disab Prev Next None 1 2 3 4 5 Prev AlrmRelay Disab Next Enab Disab Prev Err Rate 10E-4 Next 10E-4 10E-5 10E-6 10E-7 10E-8 10E-9 Prev Table C-9 General Snmp Configuration Options Snmp Configuration Options Com IP Adr Clear Next Edit Clear Prev Access 2 Read Next Read R/W PrevCom Link PPP Next PPP Slip Prev Modem IP Adr Clear Next Edit Clear Prev Num Trap Mgrs Next 1 2 3 4 5 6 Prev Table C-10 Snmp Trap Configuration OptionsTrap n IP Adr Clear Next Edit Clear Prev Gen Trap Both Next Disab Warm Auth Both Prev Trap I/F All Next NET DTE T1s Ports All Prev Link Trap Both Next Disab Up Down Both Prev Cables T1 Network Connector InterfacePin Assignments D Receiver Ring Receiver Tip Transmitter Ring Transmitter Tip RJ48C DA15P DSX-1 Port DTE Interface Integral Modem Service Port Interface AUX Port Interface COM Port Interface Figure D-5. COM Port-to-PC Cable Feature Number 3100-F1-550 Acculink 316x DSU/CSU Direction Pin Mnemonic Number EIA-530A DB25 Port Interface ConnectorTable D-7 EIA-530A Port Interface Connector Signal Circuit Table D-8 RS449 Port Interface Connector Signal Circuit RS449 Port Interface Connector Pin Assignments Direction Pin Number Port Interface ConnectorTable D-9 Port Interface Connectors Signal Pin Assignments Table D-10 DC Power Connector Signal Pin Number Power CablePower Input Connector External Clock Connector Slide Latch Adapter Figure D-11. The connector information is in Table D-12 Snmp MIB Objects E System Group Supported Management Information Base MIB II RFC System Group, MIB System Group ± ªsysServicesº Object systemSystem Group ± ªsysDescrº Object system System Group ± ªsysObjectIDº Object system Interface Group ± ªifDescrº Object ifEntry Interface Group, MIBInterface Group ± ªifTypeº Object ifEntry Interface Group ± ªifMtuº Object ifEntry DTE Interface Group ± ªifAdminStatusº Object ifEntry Icmp Group, MIB IP Group ± ªipNetToMediaTableº Object ipUDP Group, MIB IP Group, MIB DS1/E1 MIB RFC Near End Group ± ªdsx1SignalModeº Object dsx1ConfigEntry Near End Group ± ªdsx1SendCodeº Object dsx1ConfigEntryNear End Group ± ªdsx1LineStatusº Object dsx1ConfigEntry Near End Group ± ªdsx1Fdlº Object dsx1ConfigEntry Near End Group ± The DS1 Total Table Objects dsx1TotalEntry RS-232-like MIB RFCFar End Group, DS1/E1 MIB DS1 Fractional Group, DS1/E1 MIB General Port Table, RS-232-like MIB Number of Ports ± ªrs232Numberº Object rs232General Port Table ± ªrs232PortIndexº Object rs232PortEntry General Port Table ± ªrs232PortTypeº Object rs232PortEntry Input Signal Table ± ªrs232InSigNameº rs232InSigEntry Input Signal Table, RS-232-like MIBInput Signal Table ± ªrs232InSigStateº rs232InSigEntry Input Signal Table ± ªrs232InSigChangesº rs232InSigEntry Output Signal Table ± ªrs232OutSigStateº rs232OutSigEntry Output Signal Table ± ªrs232OutSigNameº rs232OutSigEntryOutput Signal Table ± ªrs232OutSigChangesº rs232OutSigEntry Generic-Interface MIB Extensions RFC Acculink 316x DSU/CSU Yellow at Net Troubleshooting Table FTable F-1 Troubleshooting Symptom Possible Cause Solutions AIS at DTE Yellow at DTEAIS at Net Configuration Worksheets G Net Value Options DTE Configuration Worksheets Network T1 Interface Network Channel Allocation D10 D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 D21 D22 D23 D25 Acami Port Chan Options Value Conf General Options Value Alarm Value OptionsUser Options Value Snmp Gen Value Options Equipment List H Equipment Feature NumberPEC Code Cable numbers for DSU/CSU are located AIS Glossary EER Index DTE Index Index-4