Table C-5 2 of Data Port Channel Configuration Options, Next

Configuration Options

Table C-5

(2 of 2)

Data Port Channel Configuration Options

Start At: Clear

Clear

N10

N11

...

N24

Start At: Clear

Clear

D10

D11

...

D24

Data Port Channel Allocation (appears for the block and ACAMI methods only). Designates the starting DS0 channel (N1±N24 for the Network T1 interface and D1±D24 for the DTE Drop/Insert T1 interface).

Press the left or right arrow key to scroll through the available selections. Available selections are only those DS0 channels that provide enough bandwidth (based on the configured data rate) to be used as a starting channel number.

Select the desired starting channel number by pressing the Function key under that number. When you make the selection, the DSU/CSU allocates the correct amount of DS0 channels to support the data rate currently configured for the port.

Clear ± Deallocates all DS0 channels for this port from the T1 interface specified by the channel allocation destination option.

NOTE: This configuration option does not appear if the individual channel allocation method (Chan) is selected using the Assign By configuration option.

N10

N11

N12 ...

N24

...

D10

D11

D12 ...

D24

-±

...

Data Port Channel Allocation (appears for the Individual Channel method only). Designates the DS0 channel to allocate to this port (N1±N24 for the Network T1 interface and D1±D24 for the DTE Drop/Insert T1 interface).

Line 1 displays the 24 channels for the Network T1 interface or DTE Drop/Insert T1 interface. Line 2 displays what is allocated to the DS0 channel indicated in Line 1. Possible values for Line 2 are:

Value Meaning

±This DS0 channel not allocated. This value may be modified from this screen.

Prtn This DS0 channel is allocated to port n, where n is a number from 1 to 4. You can modify this value from this screen for this port only.

Nn This DS0 channel is allocated to Network T1 Interface DS0 channel n where n, is a number from 1 to 24. You cannot modify this value from this screen.

Dn This DS0 channel is allocated to DTE Drop/Insert T1 Interface DS0 channel n, where n is a number from 1 to 24. You can modify this value from this screen.

Select the channel by pressing the Function key under that number. To unallocate a port, press the Function key under that port number. Pressing the Function key under channels assigned to other ports has no effect.

NOTE: The DSU/CSU automatically derives the data rate for the port from the number of DS0 channels allocated.

3160-A2-GB22-10

December 1996

C-11

Paradyne 316x Table C-5 2 of Data Port Channel Configuration Options, Start At Clear, Next, Prev

Models: 316x

Table C-5

Start At: Clear

Clear