Viking D3 manual Hood Exhaust Duct Tools Recommended for Installation, Installation Hardware

Models: D3

1 24
Download 24 pages 21.89 Kb
Page 3
Image 3

4 Hood Exhaust Duct

5 Tools Recommended for

 

Installation

When the hood is vented to the outside, a hood exhaust duct is required. All ductwork must be metal; absolutely do not use plastic duct. Check that all connections are made securely. Please read the following carefully:

Exhaust connection: The hood exhaust has

been designed to connect to a standard 3-1/4" x 10" rectangular duct. If round duct is required, a rectangular- to-round adapter must be used.

Rear exhaust: If a rear or horizontal exhaust is to be used, care should be taken to align the exhaust with the space between the studs, or wall should be prepared at the time it is constructed by leaving enough space between wall studs to accommodate exhaust.

Maximum duct length: For satisfactory air movement, the total duct length of 3-1/4" x 10" rectangular or 6" diameter round duct should not exceed 140 feet.

Elbows, adapters, wall caps, roof caps, etc. present additional resistance to air flow and are equivalent to a section of straight duct which is longer than their actual physical size. When calculating the total length, add the equivalent lengths of all transitions and adapters plus the length of all straight duct sections. Figure 3 shows the approximate feet of equivalent length of some typical ductwork parts. Use the values in parentheses for calculating air flow resistance equivalent, which should total less than 140 feet.

figure

Phillips Screwdriver

Pencil

Electric Drill

Measure

Scissors

Tape

• Saw to cut exhaust

1/2", 5/8" and

 

opening (if needed)

 

3/32" Drill Bits

6 Installation Hardware

The INSTALLATION HARDWARE items 1 - 5 are in a small bag. Items 6 - 9 are packed separately. All items are in a small carton packed below the oven.

Item

Part Name & Code

QTY

 

 

 

1

Wood Screw 5 X 35 mm

4

 

 

 

2

Toggle Bolt with nuts #10 - 24 x 50 mm

4

 

 

 

3

Top Cabinet Screw 5 x 85 mm

2

 

 

 

4

Tapping Screw 4 x 12 mm

1

 

 

 

5

Flat Washer 30 mm diameter

2

 

 

 

6

Rear Cushion

1

 

 

 

7

Exhaust Damper Assembly

1

 

 

 

8

Scale Plate

2

 

 

 

9

Grease Filter

2

 

 

 

Parts Included

Parts shown not to common scale.

E3

Page 3
Image 3
Viking D3 manual Hood Exhaust Duct Tools Recommended for Installation, Installation Hardware

D3 specifications

The Viking D3 is a cutting-edge vehicle known for its robust design and advanced features, making it a standout choice in the off-road segment. This model is particularly favored among adventurers and outdoor enthusiasts due to its ability to tackle various terrains with ease.

One of the key characteristics of the Viking D3 is its powerful engine. Equipped with a high-performance engine, it delivers impressive torque and horsepower, which translates into exceptional acceleration and pulling power. This capability allows drivers to navigate challenging landscapes, from rugged mountain trails to muddy fields, without compromising performance.

The Viking D3 is built on a durable chassis designed for stability and strength. Its reinforced frame provides the necessary support to endure heavy loads and tackle harsh environments. Additionally, the vehicle features a sophisticated suspension system that enhances ride comfort, absorbs shocks from uneven surfaces, and ensures optimal traction.

Incorporating cutting-edge technologies is another highlight of the Viking D3. It comes equipped with advanced safety features, including electronic stability control and anti-lock braking systems, which contribute to safer driving experiences. The vehicle also often includes modern navigation systems and connectivity options, allowing users to stay connected even in remote areas.

User comfort and convenience are enhanced by the Viking D3's spacious interior. The ergonomic seating design provides ample legroom and headspace for both the driver and passengers, while storage compartments are strategically placed for easy access to gear and essentials.

The Viking D3 also emphasizes versatility with its multi-functional capabilities. Users can customize the vehicle with various accessories, from additional seating to specialized equipment for specific activities like hunting or hiking. This adaptability makes the Viking D3 a practical choice for those seeking both leisure and work-related functionalities.

Furthermore, the Viking D3 is designed with fuel efficiency in mind. The integration of eco-friendly technologies helps optimize fuel consumption, making it a more sustainable option for off-road adventures.

In summary, the Viking D3 represents a perfect balance of power, technology, and comfort. Its robust construction, advanced features, and versatility make it an excellent choice for those looking to explore the great outdoors with confidence and style. Whether navigating through dense forests or cruising along scenic routes, the Viking D3 is engineered to deliver an unparalleled driving experience.