E5
figure
figure
8Save fan cover bracket for
future instructions.
4) HORIZONTAL EXHAUST: Put the wire back into the
cavity. The Fan Cover Bracket and E xhaust Damper
Assembly are mounted to the w all. Follow instruction s on
WALL TEMPLATE provided.
(C) Vertical Exhaust: Outside
Ventilation
figure
figure
9
1) VERTICAL EXHAUST: Remove and save 2 screw s from
back edge and 3 screws from th e top center of the Fan
Cover Bracket. Remove Fan Cover Brac ket by sliding it in the
opposite direction of the a rrow on the Fan Cover Bracket.
figure
figure
!
2) VERTICAL EXHAUST: Lift Hoo d Fan Unit carefully and
slip wires out of cavity.
•cauti On: Do not pull or stretch hood fan wir ing.
figure
figure
"
(A) Rotate
90˚
(B)
3) VERTICAL EXHAUST: Rotate the Hoo d Fan Unit 90˚ so
that the fan blade openings ar e facing the top of the oven.
See (A). Replace Hood Fan Unit into t he oven. Be careful not
to pinch the lead wire betwee n the inner bracket and the
Hood Fan Unit. Put the lead wire into W ire Box. See (B).
Replace the Fan Cover Bracket by sliding it into the slits
in the same direction as the arrow on the Fan Cover
Bracket. Make sure the fan blades are visible through the
top openings in the oven before proceeding.
8 Ventilation System (Preparing
Oven for Installation)