E8
Two people are recommended to attach the Built-in
Microwave Hood to the Mounting Plate.
-
figure
4) MOUNTING OVEN TO THE WALL: Thread the Power
Supply Cord through the hole ma de in the bottom of the
top cabinet. Lift and tilt t he oven forward. Hook the bac k
bottom of the oven to the botto m of the Mounting Plate.
Lift the front of the oven up to the b ottom of the cabinet.
Keep the Power Supply Cord tight to avoid i nterference wi th
mounting the oven flush with the b ottom of the cabinet.
figure
figure
.
3
5
5) MOUNTING OVEN TO THE WALL: Use the t wo Top
Cabinet Screws 3 and two Flat Wash ers 5, supplied in the
INSTALLATION HARDWARE, to attach the un it to the top
cabinet. Tighten until the top of t he oven is right against
the bottom of the cabinet.
figure
figure
/
9Bottom Plate
Screws
6) MOUNTING OVEN TO THE WALL: Attach th e two
Bottom Plate Screws saved from s ection PREPARATION OF
THE OVEN, Figure 4. Install the two Grease Filter s 9.
Checklist for Installation
•Make sure the unit has been installed according to all of
the Installation Instructions and the Wall and Top Cabinet
Templates.
•Plug in the power cord.
•Keep the Use & Care Manual and Installation Manual.
10 Mounting Oven to the Wall
Viking Range Corporation
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information,
call 1-888-VIKING1 (845-4641)
or visit the Viking Web site at
vikingrange.com
F20628