Frigidaire 316902315 important safety instructions Setting self-clean with start time

Page 27

Setting self-clean with start time

You may add start time instructions to the self-clean feature, which will automatically start clean at a later time.

IMPORTANT

Immediately after setting clean using start time instructions the oven door will start to lock. Check to be sure the oven is completely empty before setting clean with start time. Be aware that the clean feature will not start heating the oven for cleaning until the time of day reaches the set starting time

If clean was set and any items remain inside the oven, you will need to remove them before clean begins the heating portion of the cycle.

Press cancel to stop self-clean and wait for the oven door to unlock. Once unlocked, remove any items from the oven, close the oven door and set for self-clean again.

To set self-clean with delay start instructions:

1.Remove all items from the oven interior, cooktop, storage drawer (some models) or warmer drawer (some models), all oven racks from the oven and be sure the oven door is completely closed.

2.Press the keypad. The ":" in the time of day display will flash.

3.Press and hold the keypad to scroll to the time to start the self-clean cycle. Release the keypad when the desired start time is displayed.

4.Press the keypad. "---" appears in the display.

5.To start press the or keypad once. "3:00" will

appear in the display indicating that a 3 hour self-clean time is set. To change to a shorter 2 hour self-clean time press the keypad once ("2:00" will appear in

the display indicating a 2 hour clean time is desired).

6."CLn" will appear in the oven display during the clean cycle and the "door locked" indicator light will remain ON until the cleaning cycle is complete or cancelled and the oven temperature has cooled.

To stop self-clean at any time press keypad.

SELF-CLEANING

CAUTION

To avoid possible burns use care when opening the oven door after the self-clean cycle is finished. Stand to the side of the oven when opening the oven door to allow any hot air or steam to escape.

When the self-clean cycle ends:

The time of day will appear in the oven display and the "clean" and "door locked" indicator lights will continue to glow.

Once the oven has cooled down for about 1 hour and the "door locked" light has turned off, the oven door may be opened.

Wait until the oven is completely cool, then wipe away any residue or powdered ash from the oven interior using a clean damp cloth or paper towel.

NOTES

The maximum start time setting with the self-clean feature is 11 hours & 59 minutes.

Check to be sure the oven is empty before setting a self-clean cycle with a delayed start setting. Immediately after setting self-clean with a start time the oven door will lock, however, the self-clean feature will not start heating the oven for cleaning until reaching the delay start time.

On models equipped with cooktop lockout the cooktop will also lock.

27

Image 27
Contents Use&Care Product Record and Registration ContentsTip Over Hazard DefinitionsImportant Instructions for Using Your Oven When flaming foods under a ventilating hood, turn the fan on Important Safety NoticeOven rack stop Before Setting Oven ControlsOven vent location Oven racksBottom oven rack Types of oven racksAir circulation in the oven Baking layer cakes with 1 or 2 oven racksTo assemble the Effortless Oven Rack system Effortless Oven Rack systemAbout the radiant surface elements Before Setting Surface ControlsElement on & hot surface indicator lights About the ceramic glass cooktopCookware material types for the cooktop Using proper cookwareTo operate a single radiant element Setting Surface ControlsSuggested surface element settings Single radiant surface elementsTo operate a dual radiant element Dual radiant surface elements some modelsKeep warm zone some models National Center for Home Food Preservation Nchfp Home canningOven Control Functions Read the Instructions Carefully Before Using the OvenSetting for audible or silent keypad operation Setting Oven ControlsSetting the clock Changing temperature display mode F or CSetting the timer Setting lock featureTo set bake Setting bakeTo change the oven temperature after bake has started Bake timeStart time When the set bake time runs outSetting quick bake How quick bake worksSuggestions for quick bake Easy probe MinimuminternalcookingtemperaturesTo set easy probe Proper probe placement in foodProbe error message Easy probe cont’dSuggested broil settings table BroilTo set broil Adjusting the oven temperature To adjust oven temperatureOperating the oven light SELF-CLEANING Self-cleanRead before starting self-clean Restarting self-clean after a power failure Setting cleanTo set self-clean When the self-clean cycle endsTo set self-clean with delay start instructions Setting self-clean with start timeCleaning recommendation table Care & CleaningCooktop maintenance Cooktop cleaningTo maintain the cooktop appearance Replacing the oven light Cooktop cleaning cont’dAluminum foil and oven liners Aluminum foil and oven liners cont’dRemoving and replacing the lift-off oven door To remove oven doorTo replace oven door OvenControls section Problem Possible Causes SolutionsSolutions to common problems Before YOU Call Under Self-cleaning Problem Possible Causes Solutions Bake or self-cleanProblem Possible Causes Solutions Disclaimer of Implied Warranties Limitation of Remedies Major Appliance Warranty