Frigidaire 316902315 important safety instructions Setting Oven Controls, Setting the clock

Page 16

SETTING OVEN CONTROLS

Setting the clock

When the appliance is first powered up or when the power supply to the appliance has been interrupted and restored, the display will flash the time of day. Be sure to set the clock with the correct time of day before using the oven.

To set the clock when the display is flashing:

1.Press once. "CLO" will appear in the display.

2.Within 5 seconds, adjust the time by pressing the or and release the keypad when the correct time

displays. The new setting will accept in 5 seconds.

To adjust the clock when the display is not flashing:

1.Press keypad twice (do not hold keypad down). "CLO" will appear in the display.

2.Within 5 seconds, adjust the time by pressing the or and release the keypad when the correct time displays. Any adjustments made will accept in 5 seconds.

NOTE

The clock cannot be set or adjusted when the oven is active including self-clean.

Changing between continuous bake setting or 12-Hour Energy Saving feature

The oven control has a built-in 12-Hour Energy Saving feature that will shut off the oven if the control is left on for more than 11 hours and 59 minutes. The oven may be programmed to override this feature for continuous baking.

Changing to continuous bake setting:

1. Press and hold

keypad for 5 seconds until a

tone sounds. " — — hr" will appear in display for continuous cooking. The current time of day will return to the display.

2.To cancel the continuous bake setting, press and hold

keypard for 5 seconds until a tone sounds.

"12hr" will appear in display indicating that the control has returned to the 12-Hour Energy Saving feature.

NOTE

Changing between continuous bake or 12-Hour Energy savings mode does not change how the cooktop operates.

Changing temperature display mode (°F or °C)

The oven control is factory preset to display the oven temperature with Fahrenheit (°F) values. The control may be changed to display either Fahrenheit or Celsius

temperatures.

To change the temperature to display Celsius (°C) or Fahrenheit(°F):

1.Press keypad. "— —" appears in the display.

2.Press and hold the keypad until "HI" appears in the display.

3.Press and hold keypad until °F or °C appears in the display.

4.Press the or keypad to change °F to °C or °C to °F.

5.Press any keypad to return to normal operating mode.

NOTE

The temperature display mode cannot be changed when the oven or self-clean is active.

Setting for audible or silent keypad operation

Normally a beep will sound each time a keypad is pressed. If desired, the oven control may be set for silent keypad operation.

To set for silent operation:

Press and hold the keypad until the control beeps

once (about 7 seconds). This will block the controls from sounding when a keypad is pressed in the future.

To set for audible operation:

Press and hold the keypad until the control beeps once (about 7 seconds).

NOTE

When the control is set for silent keypad operation the timer, preheat and any end of cycle or any error tone alerts will remain audible.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Use&Care Contents Product Record and RegistrationDefinitions Tip Over HazardImportant Instructions for Using Your Oven Important Safety Notice When flaming foods under a ventilating hood, turn the fan onBefore Setting Oven Controls Oven vent locationOven racks Oven rack stopTypes of oven racks Air circulation in the ovenBaking layer cakes with 1 or 2 oven racks Bottom oven rackEffortless Oven Rack system To assemble the Effortless Oven Rack systemBefore Setting Surface Controls Element on & hot surface indicator lightsAbout the ceramic glass cooktop About the radiant surface elementsUsing proper cookware Cookware material types for the cooktopSetting Surface Controls Suggested surface element settingsSingle radiant surface elements To operate a single radiant elementDual radiant surface elements some models To operate a dual radiant elementKeep warm zone some models Home canning National Center for Home Food Preservation NchfpRead the Instructions Carefully Before Using the Oven Oven Control FunctionsSetting Oven Controls Setting the clockChanging temperature display mode F or C Setting for audible or silent keypad operationSetting lock feature Setting the timerSetting bake To change the oven temperature after bake has startedBake time To set bakeWhen the set bake time runs out Start timeHow quick bake works Setting quick bakeSuggestions for quick bake Minimuminternalcookingtemperatures Easy probeProper probe placement in food Probe error messageEasy probe cont’d To set easy probeBroil Suggested broil settings tableTo set broil To adjust oven temperature Adjusting the oven temperatureOperating the oven light Self-clean SELF-CLEANINGRead before starting self-clean Setting clean To set self-cleanWhen the self-clean cycle ends Restarting self-clean after a power failureSetting self-clean with start time To set self-clean with delay start instructionsCare & Cleaning Cleaning recommendation tableCooktop cleaning Cooktop maintenanceTo maintain the cooktop appearance Cooktop cleaning cont’d Aluminum foil and oven linersAluminum foil and oven liners cont’d Replacing the oven lightTo remove oven door Removing and replacing the lift-off oven doorTo replace oven door Problem Possible Causes Solutions OvenControls sectionSolutions to common problems Before YOU Call Problem Possible Causes Solutions Bake or self-clean Under Self-cleaningProblem Possible Causes Solutions Major Appliance Warranty Disclaimer of Implied Warranties Limitation of Remedies
Top Page Image Contents