•If voltage varies by 10% or more, performance of your beverage cooler may be affected. Operating beverage cooler with insufficient power can damage the compressor.
•To prevent the beverage cooler from being turned off accidentally, do not plug unit into an outlet controlled by a wall switch or pull cord. It is recommended that a separate circuit serving only your beverage cooler be provided.
•Do not pinch, knot, or bend the cord in any manner.
•DO NOT use this appliance outside. It is designed for indoor use only.
•NEVER unplug the beverage cooler by pulling on the cord. Always grip the plug firmly, and pull straight out from the receptacle.
•To avoid electrical shock, unplug the beverage cooler before cleaning.
NOTE: Turning the temperature control to “OFF” turns off the compressor, but does not disconnect the power to other electrical components.
This Use and Care Manual provides specific assembly, operating and maintenance instructions for your model. Use the beverage cooler only as instructed in this Use and Care Manual. Before starting the beverage cooler, follow these important first steps.
PARTS AND ACCESSORIES
Your beverage cooler comes with a box that contains all the parts and accessories needed for your beverage cooler. Check to make sure that you have received the box containing all of the components listed below. You will need the following tools to assemble the beverage cooler.
PHILLIPS™SOCKET
SCREWDRIVER WRENCH
CO2 CANISTER SAFE HANDLING
•CO2 canisters must be handled with extreme care. They contain potentially hazardous high pressure compressed gas.
•ALWAYS connect CO2 gas canisters to a pressure regulator.
•NEVER drop or throw the CO2 canister.
•NEVER connect gas canister directly to keg.
•ALWAYS keep CO2 canisters in a cool place (70º or less) and away from heat.
•In case of CO2 leakage, ventilate and evacuate the area immediately.
•ALWAYS keep canister secured in an upright position.
•Check the Department of Transportation (D.O.T.) test date on the canister neck and do not use if older than 5 years.
•Return outdated canister to your gas supplier for one that is within the time window.
3
ADJUSTABLE PLIERS
WRENCH
DRIP TRAY AND MOUNTING HARDWARE BOX
(1) | Drip Tray |
|
|
| 1 piece | ||
(2) | Drip Tray Cover |
|
|
| 1 piece | ||
(3) | Drip Tray Bracket |
|
|
| 1 piece | ||
(4) | CO2 Canister Bracket |
|
|
| 1 piece | ||
(5) | Mounting Screws |
|
|
| 6 pieces | ||
(6) | 4” Long Carriage Bolt |
|
|
| 1 piece | ||
(7) | Wing Nut |
|
|
| 1 piece | ||
(8) | Hose Routing Clips |
|
|
| 2 pieces | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(1) DRIP TRAY | (2) DRIP TRAY |
| (3) DRIP TRAY |
| (4) CO2 CANISTER | |
|
| COVER |
| BRACKET |
| BRACKET |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(5) MOUNTING | (6) 4” LONG | (7) WING NUT | (8) HOSE |
SCREW | CARRIAGE BOLT |
| ROUTING CLIP |