Electrolux S90 Downpipe, Front Panels a and B, Control Panael C, OVEN, Storage SPACE, HOT Cabinet

INSTALLATION INSTRUCTIONS

2.1FRONT PANELS (A) and (B)

(1)

Fig.6 Front panel

DUnscrew screws (1 or 3). Also, in the case of a built-in oven, unscrew screws (2 and/or 4) on the inside of the oven.

DPull the panel away forwards and downwards.

2.2CONTROL PANAEL (C)

(2)

(1)

a b

(3)

Fig. 7 Control panel

c

DRemove the knob.

DLoosen the screws underneath (1 / Fig.7a) and remove the base plate.

DLoosen the screws (2 / Fig.7b) and 3 / Fig.7c)

DRemove the panel.

2.3OVEN, STORAGE SPACE, HOT CABINET

D Remove panels A, B and C. D Undo screws (5).

D Pull out element.

3.	DOWNPIPE
a	b

Fig. 8 Downpipe

c

Work surfaces with a downpipe (Fig.8a) have the downpipe opening on the right-hand side of the appliance. A flexible sili- con hose when installed in the standard manner ends under- neath and to the right, 20 mm behind the front of the appliance (Fig.8b).

DAlternatively, the hose can be relocated to the rear and be routed through other pre-cut openings (Fig.8c).

62.9678.01_UL Page 7