BEFORE SETTING OVEN CONTROLS
Oven vent location
The oven vent is located under the left rear surface element (See Fig. 1). When the oven is on, warm air passes through the vent. This venting is necessary for proper air circulation in the oven and good baking results.
Do not block the oven vent.
oven vent located
under left rear element
Removing, replacing & arranging racks
To remove - pull the rack forward until it stops. Lift up front of rack and slide out.
To replace - fit the rack onto the guides on the oven walls. Tilt the front of the rack upward and slide the rack back into place.
Arranging - always arrange the oven racks when the oven is cool (prior to operating the oven).
CAUTION
Fig. 1
Types of oven racks
Your range may be equipped with one or more of the oven rack styles shown.
flat handle oven rack
flat
oven rack
offset 
oven rack 
The flat oven rack or flat handle oven rack (some models) may be used for most cooking needs.
The offset oven rack (some models) is designed to place the base of the rack about 1/2 of a rack position lower than normal. This rack design provides several additional possible locations between the standard positions.
Always use oven mitts when using the oven. When using the appliance, oven racks and cooktop will become very hot which can cause burns.
Fig. 2
Recommended rack positions by food type
Food type | Position |
|
|
Broiling meats | See broil |
Cookies, cakes, pies, biscuits & muffins | 2 or 3 |
Frozen pies, angel food cake, yeast, bread |
|
and casseroles | 1 or 2 |
Small cuts of meat or poultry | 1 or 2 |
Turkey, roast or ham | 1 |
|
|
Air circulation in the oven
For best baking results allow
6