Frigidaire 318200869 Setting the Controls for Self-Clean Cycle, To Remove and Replace Oven Door

Page 17

General cleaning (continued)

Cleaning the Self-Clean Oven (some models, continued)

Do Hand

Clean

Frame

Do Hand

Do Not Hand

Clean Door

Clean Seal

Preparing the Oven for Self-Cleaning

1.Remove all excess spillovers in the oven cavity before starting the self-cleaning cycle. To clean, use hot soapy water and a cloth. Large spillovers can cause heavy smoke or fire when subjected to high temperatures. DO NOT allow food spills with a high sugar or acid content (such as tomatoes, sauerkraut, fruit juices or pie filling) to remain on the surface as they may cause a dull spot even after cleaning.

2.Clean any soil from the oven frame and the door liner (see illustration). These areas heat sufficiently during self-cleaning cycle to burn soil on. Clean with soap and water.

3.Remove the broiler pan and insert, all utensils and any foil. These items do not withstand high cleaning temperatures

4.Oven racks may be left in the oven or may be removed. If they go through the clean cycle, their color will turn slightly dull. After the cycle is completed and the oven has cooled, rub the sides of the racks with wax paper or a cloth containing a small amount of baby oil or salad oil. This will make the racks glide easier.

What to Expect During Cleaning

While the oven is in operation, the oven heats to temperatures much higher than those used in normal cooking. Sounds of metal expansion and contraction are normal. Odor is also normal as the food soil is being removed. Smoke may appear through the oven vent, located on the top of the control panel.

If heavy spillovers are not wiped up before cleaning, they may flame and cause more smoke and odor than usual. This is normal and safe and should not cause alarm. If available, use an exhaust fan during the self-cleaning cycle.

NOTE: A smoke eliminator in the oven vent converts most of the soil into a colorless vapor.

Setting the Controls for Self-Clean Cycle

For the setting of the clean cycle, refer to Timer or Electronic Oven Control section.

To Remove and Replace Oven Door

1.Open the door to the fully opened position.

2.Pull up the lock located on both hinge supports and engage it in the hook of the hinge levers. You may have to apply a little downward pressure on the door to pull the locks fully over the hooks.

3.Grab the door by the sides, pull the bottom of the door up and toward you to disengage the hinge supports.

Keep pulling the bottom of the door toward you while rotating the top of the door toward the range to completely disen- gage the hinge levers.

4.Proceed in reverse to reinstall the door.

Make sure the hinge supports are fully engaged before unlocking the hinge levers.

The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.

Lock in normal position

Lock engaged for door removal

HINGE SLOT Door re- moved from the range

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Slide-in Models Register Your Product Product RegistrationVersión en español Record Your Model and Serial NumbersImportant Safety Instructions Important Safety Instructions Selecting Surface Cooking Utensils Prevent damage to cooktop and burner grates Canning Tips InformationLiquefied Petroleum Propane Gas Conversion Proper Burner AdjustmentsFlame Size Flame size Type of CookingBefore Setting Oven Controls Setting Surface ControlsSetting Oven Controls Oven Vent LocationSetting Warmer Drawer Controls some models Before Setting Warmer Drawer Controls some modelsArranging Warmer Drawer Rack Positions To Operate the Warmer DrawerWarmer Drawer Recommended Food Settings Chart Temperature SelectionConvection Cooking some models Convection Roasting some modelsBenefits of Speed BakeTM Cooking System Speed BakeTM Cooking System some modelsGeneral Cooking Instructions To Set Speed BakeTM Cooking SystemAir Circulation in the Oven Baking Problems and Solutions ChartOven Baking Broiling Surfaces How to Clean General CleaningCleaning Various Parts of Your Range To Clean the Burner Grates To Clean the Tempered-glass Cooktop some modelsTo Clean the Burner Grates, Burner Cap and Burner Base To Clean the Buner Cap Cleaning the Self-Clean Oven some modelsAdhere to the following cleaning precautions To Replace the Burner Base and the Burner CapDo Hand Clean Frame Do Not Hand Clean Door Clean Seal Setting the Controls for Self-Clean CyclePreparing the Oven for Self-Cleaning What to Expect During CleaningTo Remove and Replace Warmer Drawer some models Removable Outer Door Glass Panel some modelsBefore you call for service read this Avoid Service ChecklistInstallation Changing Oven LightHave sufficient room for range clearance Avoid Service CheckListRange does not Operate Surface UnitsBrown streaks or specks Glass Cooktop Cleaning in the General Cleaning sectionPoor Baking Results Temperature in the Electronic Oven Control sectionPoor baking results BroilingControl section Self-cleaning cycle does not workAvoid Transportation Damage to your Range Range Warranty Cuisinières encastrables Enregistrez votre appareil Enregistrement duProduit Mesures DE Sécurité Importantes Mesures DE Sécurité Importantes suite Conservez CES Instructions Conseils et renseignements sur la mise en conserve Casseroles et sous-plats particuliersDimension de la flamme Type de cuisson Dimension de la flammeConversion au propane Bon réglage des brûleursAvant de régler les commandes du four Réglage des commandes des brûleurs de surfaceRéglage des commandes du four Installation des grillesRéglage de la commande du thermostat du tiroir réchaud Réglage de la commande du tiroir réchaud certains modèlesDisposition de la grille du tiroir-réchaud Pour faire fonctionner le tiroir-réchaudRôtissage par convection certains modèles Cuisson par convection certains modèlesSélection du réglage de la température Tableau des réglages recommendés pour le tiroir-réchaudLes avantages du système de cuisson rapide Système de cuisson rapide certains modèlesInstructions de cuisson générales Réglage du système de cuisson rapideCirculation de l’air dans le four Cuisson au fourCuisson au gril Surfaces Méthodes de nettoyage Nettoyage généralNettoyage des composantes de la cuisinière Nettoyage général suite Nettoyage du four autonettoyant certains modèles Enlever et réinstaller de la porte Réglage des commandes du four pour un cycle autonettoyantNettoyage du four autonettoyant certains modèles, suite Préparation du four avant lautonettoyagePour retirer et replacer le tiroir-réchaud certains modèles Porte avec vitre extérieure démontable certains modèlesAvant d’appeler un technicien de service lisez ce qui suit Remplacement de lampoule du fourListe des vérifications préventives Tiroir de rangement certains modèlesSurface DE Cuisson Liste des vérifications préventives suiteLA Cuisinière NE Fonctionne PAS Surface DE Cuisson Avec Brûleurs À GAZ Certains Modèles Surface DE Cuisson Vitrocéramique Certains ModèlesCuisson AU Gril Mauvais Résultats DE Cuisson AU FourAutnettoyage DU Four Certains Modèles Évitez d’endommage l’appareil durant son transportGarantie DE LA Cuisinière

318200869 specifications

The Frigidaire 318200869 is a versatile and essential appliance in modern kitchens, specifically designed to enhance cooking efficiency and provide convenient features for home chefs. This replacement part is primarily associated with various Frigidaire ranges and ovens, ensuring that these appliances function optimally.

One of the standout features of the Frigidaire 318200869 is its compatibility with a range of Frigidaire models, making it a reliable choice for those needing a replacement component. Quality and precision engineering are hallmarks of this product, ensuring that it meets or exceeds the standards set by the manufacturer. This component plays a critical role in maintaining the seamless operation of your oven, allowing for consistent cooking temperatures and effective meal preparation.

The design of the Frigidaire 318200869 emphasizes user-friendliness. It is straightforward to install, making it accessible even for those who may not have extensive technical skills. Users can typically replace the part with minimal tools and effort, reducing downtime in the kitchen. This ease of installation is a significant advantage for busy households, where time is of the essence.

In terms of technology, this replacement part incorporates features that enhance heat distribution and retention. This is crucial for achieving even cooking results, whether you are baking, broiling, or roasting. The Frigidaire 318200869 ensures that every dish is cooked to perfection, with no cold spots or undercooked areas.

Durability is another key characteristic of this component. Made from high-quality materials, the Frigidaire 318200869 is designed to withstand the rigors of everyday cooking. It is engineered to resist wear and tear, ensuring that it remains functional for years to come.

Additionally, the Frigidaire brand is synonymous with innovation and reliability in kitchen appliances. The 318200869 reflects this commitment to excellence, providing users with a dependable solution that enhances their cooking experience.

Overall, the Frigidaire 318200869 is a must-have for anyone looking to maintain the efficiency and functionality of their Frigidaire oven. Its combination of compatibility, ease of installation, advanced technology, and durability makes it an excellent investment for any kitchen.
Top Page Image Contents