Frigidaire 318200830 Things to Remember, Use and Care of Glass Surface, Aluminum foil, To Remove

Page 15

Ceramic Glass Cooktop (some models) (continued)

Special Caution for Aluminum Foil and Aluminum Cooking Utensils

1)Aluminum foil

Use of aluminum foil will damage the cooktop. Do not use under any circumstances.

2)Aluminum utensils

The melting point of aluminum being much lower than that of other metals, care must be taken when aluminum pots or pans are used. If allowed to boil dry, not only will the utensil be ruined, but also permanent damage in the form of breakage, fusing or marking may affect the ceramic glass surface.

Sliding aluminum or copper clad bottom pans on the cooktop can cause metal markings on the cooktop surface. These marks should be removed immediately after the cooktop has cooled using the cooktop cleaning cream. Metal marks can become permanent if not removed prior to future use.

Cookware (cast iron, metal, ceramic or glass) with rough bottoms can mark or scratch the cooktop surface. Do not slide anything metal or glass across the cooktop. Do not use your cooktop as a cutting board or work surface in the kitchen. Do not cook foods directly on the cooktop surface without a pan.

Do not drop heavy or hard objects on the glass cooktop, they may cause it to crack.

Things to Remember

1.AVOID using bleach and don’t use ammonia to clean the ceramic surface.

2.Do not put plastic items on warm cooking areas.

3.Never slide oven racks across cooktop surface. They may scratch or metalmark the cooktop.

4.If cooktop should break, do not use cooktop or attempt to clean it. Call your authorized service technician immediately.

5.Never use a trivet or metal stand between the cooking utensil and the ceramic cooktop. The ceramic surface may be scratched, metal marked or etched by such items.

6. Sugary spills can cause pitting of your cooktop surface. Therefore, you must begin cleaning the spills while the cooktop is still hot. Use caution when following the steps below.

a) Turn off all surface units and remove all pans immediately.

b)Wearing an oven mitt, use a razor blade scraper to scrape the hot spill out of the cooking zone to a cooler area on the cooktop.

c)Allow the cooktop to cool.

Use and Care of Glass Surface

.......... Problem

Cause

To Prevent

To Remove

 

 

 

 

..... Fine ”brown

Coarse particles (salt,

Clean cooktop after

Tiny scratches are not removable.

..... lines“ (tiny

sand, sugar or grit)

every use

They can be minimized by

..... scratches or

between bottom of

 

continual use of cleaner cream.

..... abrasions which

cookware and cooktop

 

Such scratches do not affect

..... have collected

that are not removed

 

cooking.

..... soil)

before cooking.

 

 

............................................

Using incorrect cleaning

Daily use of cleaner

 

............................................

materials

cream.

 

 

 

 

 

..... Metal marking

Sliding or scraping

Do not slide cookware

Apply cleaner cream

..... (mark or black

metal utensils or oven

across cooktop

with dampened paper

..... marks)

shelves across cooktop

 

towel to a cooled surface.

 

 

 

 

..... Brown streaks

Cleaning with a

Use cleaner cream

Use a small amount of cleaner

..... and specks

sponge or dishcloth

with clean, damp paper

cream with clean, damp paper

............................................

that has been used

towel

towel.

............................................

for other kitchen tasks.

 

 

 

 

 

 

NOTE: Due to the high intensity of heat generated by the surface elements, the glass surface will turn green when the element will be turned off. This phenomenon is normal and the glass will come back to its original white color after it has completely cooled down. (White glass cooktops only).

15

Image 15
Contents Slide-in Models Record Your Model and Serial Numbers Product RegistrationRegister Your Product Versión en españolImportant Safety Instructions Know which knob controls each surface heating unit Important Safety InstructionsSelecting Surface Cooking Utensils Clean in the self-cleaning cycle only the parts of the ovenCanning Tips Information With large amounts of liquids soup making or fat fryingPrevent damage to cooktop Ceramic Glass Cooktop some models Setting Surface ControlsExpandable Radiant Elements some models Types of heating units usedCeramic Glass Cooktop some models Regular Radiant Elements some modelsArranging Oven Racks Before Setting Oven ControlsSetting Warm Zone Control some models Oven Vent LocationSetting Oven Controls Before Setting Warmer Drawer Controls some modelsSetting Warmer Drawer Controls some models Convection Roasting some models Temperature SelectionWarmer Drawer Recommended Food Settings Chart Convection Cooking some modelsBaking Problems and Solutions Chart Oven BakingAir Circulation in the Oven Broiling General Cleaning Cleaning Various Parts of Your RangeSurfaces How to Clean Aluminum utensils Things to RememberUse and Care of Glass Surface Aluminum foilDo not Use on Ceramic Glass Cooktop Cleaning Materials for Ceramic Glass CooktopTo Prevent Daily and proper use of cleaner cream Do Use on Ceramic Glass CooktopCoil Surface Element some models Porcelain enamel cooktop cleaning instructions some modelsAdhere to the following cleaning precautions To Raise the Top for Cleaning some modelsCleaning the Self-Clean Oven some models Cleaning the Regular Oven non self-clean oven, some modelsWhat to Expect During Cleaning Setting the Controls for Self-Clean CycleDo Hand Clean Frame Do Not Hand Clean Door Clean Seal Preparing the Oven for Self-CleaningTo Remove and Replace Warmer Drawer some models Removable Outer Door Glass Panel some modelsTo replace the drawer Changing Oven LightStorage Drawer some models To remove the drawerAvoid Service CheckList Avoid Service ChecklistBefore you call for service read this InstallationGlass Cooktop Cleaning in the General Cleaning section Surface UnitsBrown streaks or specks Poor Baking Results Broiling Avoid Transportation Damage to your RangeRange Warranty Cuisinières électriques Numéro de modèle Numéro de série Date de l’achat Enregistrement du produitEnregistrez votre appareil La compagnie Produits Electrolux Nord- AméricainsMesures DE Sécurité Importantes Mesures DE Sécurité Importantes suite Ne nettoyez dans le cycle autonettoyant que les parties du Conservez CES InstructionsCasseroles et sous-plats particuliers Conseils et renseignements sur la mise en conservePour ne pas endommager la surface de cuisson Surface de cuisson vitrocéramique certains modèles Réglage des commandes des foyers de surfaceTypes de foyers utilisés Surface de cuisson vitrocéramique certains modèles, suiteAvant de régler les commandes du four Installation des grillesPosition de lévent Réglage de la commande du tiroir réchaud certains modèles Réglage des commandes du fourTableau des réglages recommendés pour le tiroir-réchaud Cuisson par convection certains modèlesRôtissage par convection certains modèles Sélection du réglage de la températureCirculation de l’air dans le four Cuisson au fourCuisson au gril Nettoyage général Nettoyage des composantes de la cuisinièreSurfaces Méthodes de nettoyage Surface de cuisson vitrocéramique certains modèles suite Papier d’aluminiumRécipients en aluminium Pour l’enlever Entretien de la surface de cuisson suiteComment nettoyer la surface de cuisson vitrocéramique Ne pas utiliser sur la surface de cuisson vitrocéramiquePour la saleté tenace et les taches calcinées Nettoyage général suiteSurface de cuisson à foyers spiralés certains modèles Nettoyage quotidien Pour la saleté normalePour les renversements sucrés Ce qui peut survenir durant lautonettoyage Nettoyage du four autonettoyant certains modèlesPrenez les précautions de nettoyage qui suivent Préparation du four avant lautonettoyagePorte avec vitre extérieure démontable certains modèles Réglage des commandes du four pour un cycle autonettoyantEnlever et réinstaller de la porte Pour réinstaller la vitre extérieure de la porteTiroir de rangement certains modèles Pour retirer et replacer le tiroir-réchaud certains modèlesPour remplacer la lampe Remplacement de lampoule du fourAvant d’appeler un technicien de service lisez ce qui suit Liste des vérifications préventivesSurface DE Cuisson Vitrocéramique Certains Modèles Liste des vérifications préventives suiteLA Cuisinière NE Fonctionne PAS Suite Surface DE CuissonNettoyage générale Surface DE Cuisson Vitrocéramique Certains MODÈLES, SuiteSurface DE Cuisson Avec Brûleurs À GAZ Certains Modèles Mauvais Résultats DE Cuisson AU FourÉvitez d’endommage l’appareil durant son transport Cuisson AU GrilAutnettoyage DU Four Certains Modèles Garantie DE LA Cuisinière

318200830 specifications

The Frigidaire 318200830 is a highly regarded range replacement part that has made an impact in the home appliance industry, specifically in the realm of electric ranges. This product stands out due to its innovative design and thoughtful engineering, catering to the needs of modern households.

One of the main features of the Frigidaire 318200830 is its compatibility with a wide range of Frigidaire electric range models. This versatility ensures that consumers can easily find a suitable replacement for their existing appliances, saving both time and effort. The component is specifically designed for seamless installation, allowing users to replace worn or damaged parts without the need for professional assistance.

In terms of technology, the Frigidaire 318200830 boasts advanced manufacturing techniques, ensuring high durability and resilience. The component is crafted from quality materials that resist wear and tear, making it a reliable choice for everyday cooking needs. This durability translates to a longer lifespan, ensuring that customers can benefit from their investment for years to come.

The Frigidaire 318200830 also incorporates safety features that prioritize user protection. Its design includes built-in mechanisms to prevent overheating and ensure safe operation during cooking. This attention to safety is a significant factor that consumers consider while selecting replacement parts for their kitchen appliances.

Another characteristic that sets the Frigidaire 318200830 apart is its performance efficiency. The component is engineered to enhance the overall functioning of electric ranges, resulting in improved cooking results. Whether baking, broiling, or simmering, this part works efficiently to maintain even heat distribution, thus ensuring that food cooks evenly and to perfection.

Moreover, the Frigidaire 318200830 emphasizes user-friendliness. The product is designed with ease of use in mind, allowing users to navigate their cooking tasks effortlessly. From straightforward installation to intuitive operation, this component is aimed at enhancing the overall cooking experience.

In summary, the Frigidaire 318200830 is a standout replacement part for electric ranges, known for its compatibility, durability, safety, and performance efficiency. With its focus on user-friendliness and advanced technology, it serves as an excellent choice for those seeking to optimize their cooking appliances and elevate their culinary endeavors. Whether for everyday meals or special occasions, this component plays a crucial role in the kitchen, delivering quality results and peace of mind for home cooks everywhere.