Frigidaire 316902304 Before Setting Surface Controls, Types of cooktop elements

Page 10

BEFORE SETTING SURFACE CONTROLS

Types of cooktop elements

The ceramic glass cooktop has radiant surface elements located below the surface of the glass. The patterns on the ceramic glass will outline the size and type of element available. The single radiant element will have one round outline pattern shown (keep warm zone is designed to keep food warm only). The versatile dual radiant element allows the user to set the smaller inner portion as a single element or both inner and outer portions may be set to heat together (See Fig. 1).

Using proper cookware

The size and type of cookware used will influence the setting needed for best cooking results. Be sure to follow the recommendations for using proper cookware as illustrated in Figs. 2 & 3.

Cookware should have flat bottoms that make good contact with the entire surface heating element (See Fig. 2). Check for flatness by rotating a ruler across the bottom of the cookware (See Fig. 3). For more information about the ceramic cooktop see “Cooktop Cleaning & Maintenance” in the Care & Cleaning section.

Keep warm zone

Single radiant

Dual radiant

surface control

surface control

surface control

(some models)

 

(some models)

Fig. 1

Cookware material types

The cookware material determines how evenly and quickly heat is transferred from the surface element to the pan bottom. The most popular materials available are:

Aluminum - Excellent heat conductor. Some types of food will cause it to darken (Anodized aluminum cookware resists staining & pitting). If aluminum pans slide across the ceramic cooktop, they may leave metal marks which will resemble scratches. Remove these marks immediately.

Copper - Excellent heat conductor but discolors easily. May leave metal marks on ceramic glass (see Aluminum).

Flat bottom and straight sides.

Tight fitting lids.

Weight of handle does not tilt pan. Pan is well balanced.

Pan sizes match the amount of food to be prepared and the size of the surface element.

Made of a material that conducts heat well.

Easy to clean.

Always match pot diameter to element size.

Curved and warped pan.

Pan larger than cooking area marked on cooktop by more than one-half inch or 12mm.

Heavy handle tilts pan.

Pan is smaller or larger than heating area marked on cooktop.

Stainless - Slow heat conductor with uneven cooking results. Is durable, easy to clean and resists staining.

Cast Iron - A slow heat conductor however will retain heat very well. Cooks evenly once cooking temperature is reached. Not recommended for use on ceramic cooktops.

Porcelain-enamel on metal - Heating characteristics will vary depending on base material. Porcelain-enamel coating must be smooth to avoid scratching ceramic cooktops.

Glass - Slow heat conductor. Not recommended for ceramic cooktop surfaces because it may scratch the glass.

Fig. 2

Fig. 3

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Use&Care Contents Product Record and RegistrationImportant Safety Instructions DefinitionsImportant Instructions for Using Your Oven SELF-CLEANING Ovens Features AT a Glance Your electric range features includeTypes of oven racks Before Setting Oven ControlsOven vent location Removing, replacing & arranging racksTo assemble the Effortless Oven Rack system Effortless Oven Rack systemSpecial dark coating on the left and right rack Baking layer cakes with 1 or 2 oven racks Element on & hot surface indicator lightsAir circulation in the oven About the ceramic glass cooktopTypes of cooktop elements Before Setting Surface ControlsUsing proper cookware Cookware material typesSingle radiant surface elements all models Setting Surface ControlsSuggested radiant surface element settings To operate the single radiant elementQuick boil feature some models To operate a dual radiant elementMed Home Canning Feature Min. temp. /time Max. temp. /time Minimum & maximum control settingsOven Control Functions Setting 12 or 24 hour display modes Setting Oven ControlsSetting the clock Changing oven temperature displaySetting the minute timer Setting a silent control panelSetting oven lockout Add a minute featureSetting bake time Setting quick preheatSetting bake When the set bake time runs outSetting Oven Controls Suggestions for convect baking Benefits of the convect featureConvect roast all models Press convectConvect broil some models Setting convect convection convertSuggestions for convect broil To set broil Step Press Suggested broil settings table electric ovenBroil Leave the oven door openSetting chicken nuggets feature cont’d Setting pizza featureSetting chicken nuggets feature Setting keep warmExample decrease the oven temperature by 30F Step Press Adjusting the oven temperatureExample increase the oven temperature by 30F Step Press Operating the oven lightIf a timed bake or delayed timed bake is needed To Set the Sabbath Feature for use onBake time and delay start pads To Set the Sabbath Feature cont’d Self-cleaning SELF-CLEANINGAdhere to the following self-clean precautions Press delay start When the self-clean cycle has completedCare & Cleaning Cleaning recommendation tableFor light to moderate soil Cooktop maintenance Cooktop cleaningDo not For heavy, burned on soilReplacing the oven light Cooktop cleaning cont’dTo replace the oven light bulb To remove oven door Removing and replacing the lift-off oven doorTo replace oven door Problem Solution Used. See Cooktop Cleaning and Maintenance in the Care CleaningsectionMajor Appliance Warranty Disclaimer of Implied Warranties Limitation of Remedies

316902304 specifications

The Frigidaire 316902304 is a high-quality oven burner assembly that serves as a crucial component in the operation of various Frigidaire cooktops and ranges. Designed with efficiency and reliability in mind, this burner assembly ensures an even and consistent heating experience, making it easier to prepare meals to perfection.

One of the main features of the Frigidaire 316902304 is its construction from durable materials designed to withstand the rigors of daily cooking. This high-grade metal not only contributes to the longevity of the product but also supports optimal heat distribution across the cooking surface, allowing for even cooking results. The design facilitates easy installation, enabling users to replace worn-out or damaged burners effortlessly, ensuring minimal downtime in the kitchen.

Incorporating advanced technologies, the Frigidaire 316902304 utilizes modern engineering techniques that enhance cooking performance. It boasts efficient energy consumption, reducing overall cooking times and energy bills. This oven burner assembly features compatibility with various types of fuel, including natural gas and propane, which gives consumers the flexibility to choose the best option for their cooking needs.

Another significant advantage of this burner assembly is its compatibility with a wide range of Frigidaire models. This versatility makes it an ideal choice for homeowners, professional chefs, or anyone needing a reliable burner to enhance their cooking experience. The burner is designed to fit seamlessly into a range of Frigidaire appliances, making it easy to upgrade or replace.

In terms of safety features, the Frigidaire 316902304 has built-in mechanisms to prevent flame blowout, ensuring a safe cooking environment. This aspect is particularly important for families with children and pets, as it minimizes the risk of accidents in the kitchen.

The Frigidaire 316902304 is also designed for easy cleaning, with a smooth surface that allows for quick wipe-downs and maintenance. With its robust design, energy efficiency, compatibility, and safety features, the Frigidaire 316902304 is an essential component for anyone looking to enhance their cooking experience while ensuring durability and performance in their kitchen.
Top Page Image Contents