Frigidaire 316902304 important safety instructions To assemble the Effortless Oven Rack system

Page 8

BEFORE SETTING OVEN CONTROLS

Effortless™ Oven Rack system

Some models are equipped with a special oven rack system that automatically partially extends the oven rack from the interior oven glides to assist in easier access to your food items. This feature works whenever the oven door is opened or closed.

To assemble the Effortless™ Oven Rack system:

1.

Locate all required parts. You will need the supplied

 

oven rack (Effortless™ Oven Rack is a flat rack with a

 

special dark coating on the left and right rack

 

sides) and the 2 supplied chrome connector arms.

2.

Open the oven door. Be sure the oven is completely

 

cool before proceeding.

3.

Place the oven rack in positions 2, 3 or 4 only (see

 

previous page to verify positions).Be sure the rack

 

connector brackets are at the rear of the range and

 

pointing towards oven bottom (See Fig. 2).

4.

Assemble one connector arm at a time. With the oven

IMPORTANT

Only the Effortless™ Oven Rack system should be used in oven rack position 2. Placing ANY other rack in oven rack position 2 will prevent the oven door from fully closing and may damage the oven door, oven cavity or the door connector brackets.

If the rack system is not assembled with the connector arms the Effortless™ Oven rack may be used in oven rack positions 2 thru 6. Do not attempt to use the Effortless™ Oven rack in rack position 1.

door

rack connector

connector

bracket

bracket

 

 

door open and the oven rack in place, install one end of

 

the connector arm to the hole in the door connector

 

bracket (Fig. 1) and the other end in the hole in the

 

rack connector bracket (Fig. 2 and as in Fig. 3). The

 

oven rack may need to be adjusted in or out in the rack

 

position to match the length of the connector arm.

5.

While holding the connector arm in place, twist the

 

connector arm so the ends of the connector arm point

 

upwards (See Figs. 4 & 5). The connector arm should

 

now be locked into position.

6.

Repeat steps 4 and 5 for the other connector arm.

7.

Once both connector arms are properly in place, be

Fig. 1

connector

arm

Fig. 3 - assembly of the Effortless™ Oven Rack

Fig. 2

oven rack

sure to test the oven rack operation by gently closing

the oven door. The oven rack should move in and out of

the oven freely when the door is opened or closed.

open oven

connector

door

arm

CAUTION

REMOVE ALL OVEN RACKS and accessories before starting a self-clean cycle. If the oven racks are left in the oven during the self-clean cycle, the glide ability of the Effortless™ Oven Rack system will be damaged and will cause oven racks to loose their shiny finish and or turn blue. Remove ALL oven racks and clean according to instructions provided in the Care & Cleaning section of this manual.

Make sure the oven and oven racks are COMPLETLY cool and safe to touch before attempting to assemble or disassemble the Effortless™ Oven Rack system. Never pick up hot oven rack parts.

connector arm

Fig. 4

connector

arm

Fig. 5

left and right

door connector

brackets

with connector arm ends shown in locked position (pointing upwards)

Fig. 6 - Effortless™ Oven Rack after assembly

8

Image 8
Contents Use&Care Contents Product Record and RegistrationImportant Safety Instructions DefinitionsImportant Instructions for Using Your Oven SELF-CLEANING Ovens Features AT a Glance Your electric range features includeBefore Setting Oven Controls Oven vent locationTypes of oven racks Removing, replacing & arranging racksSpecial dark coating on the left and right rack Effortless Oven Rack systemTo assemble the Effortless Oven Rack system Element on & hot surface indicator lights Air circulation in the ovenBaking layer cakes with 1 or 2 oven racks About the ceramic glass cooktopBefore Setting Surface Controls Using proper cookwareTypes of cooktop elements Cookware material typesSetting Surface Controls Suggested radiant surface element settingsSingle radiant surface elements all models To operate the single radiant elementQuick boil feature some models To operate a dual radiant elementMed Home Canning Oven Control Functions Minimum & maximum control settingsFeature Min. temp. /time Max. temp. /time Setting Oven Controls Setting the clockSetting 12 or 24 hour display modes Changing oven temperature displaySetting a silent control panel Setting oven lockoutSetting the minute timer Add a minute featureSetting quick preheat Setting bakeSetting bake time When the set bake time runs outSetting Oven Controls Benefits of the convect feature Convect roast all modelsSuggestions for convect baking Press convectSuggestions for convect broil Setting convect convection convertConvect broil some models Suggested broil settings table electric oven BroilTo set broil Step Press Leave the oven door openSetting pizza feature Setting chicken nuggets featureSetting chicken nuggets feature cont’d Setting keep warmAdjusting the oven temperature Example increase the oven temperature by 30F Step PressExample decrease the oven temperature by 30F Step Press Operating the oven lightBake time and delay start pads To Set the Sabbath Feature for use onIf a timed bake or delayed timed bake is needed To Set the Sabbath Feature cont’d Adhere to the following self-clean precautions SELF-CLEANINGSelf-cleaning Press delay start When the self-clean cycle has completedCare & Cleaning Cleaning recommendation tableCooktop maintenance Cooktop cleaning Do notFor light to moderate soil For heavy, burned on soilTo replace the oven light bulb Cooktop cleaning cont’dReplacing the oven light To replace oven door Removing and replacing the lift-off oven doorTo remove oven door Problem Solution Used. See Cooktop Cleaning and Maintenance in the Care CleaningsectionMajor Appliance Warranty Disclaimer of Implied Warranties Limitation of Remedies

316902304 specifications

The Frigidaire 316902304 is a high-quality oven burner assembly that serves as a crucial component in the operation of various Frigidaire cooktops and ranges. Designed with efficiency and reliability in mind, this burner assembly ensures an even and consistent heating experience, making it easier to prepare meals to perfection.

One of the main features of the Frigidaire 316902304 is its construction from durable materials designed to withstand the rigors of daily cooking. This high-grade metal not only contributes to the longevity of the product but also supports optimal heat distribution across the cooking surface, allowing for even cooking results. The design facilitates easy installation, enabling users to replace worn-out or damaged burners effortlessly, ensuring minimal downtime in the kitchen.

Incorporating advanced technologies, the Frigidaire 316902304 utilizes modern engineering techniques that enhance cooking performance. It boasts efficient energy consumption, reducing overall cooking times and energy bills. This oven burner assembly features compatibility with various types of fuel, including natural gas and propane, which gives consumers the flexibility to choose the best option for their cooking needs.

Another significant advantage of this burner assembly is its compatibility with a wide range of Frigidaire models. This versatility makes it an ideal choice for homeowners, professional chefs, or anyone needing a reliable burner to enhance their cooking experience. The burner is designed to fit seamlessly into a range of Frigidaire appliances, making it easy to upgrade or replace.

In terms of safety features, the Frigidaire 316902304 has built-in mechanisms to prevent flame blowout, ensuring a safe cooking environment. This aspect is particularly important for families with children and pets, as it minimizes the risk of accidents in the kitchen.

The Frigidaire 316902304 is also designed for easy cleaning, with a smooth surface that allows for quick wipe-downs and maintenance. With its robust design, energy efficiency, compatibility, and safety features, the Frigidaire 316902304 is an essential component for anyone looking to enhance their cooking experience while ensuring durability and performance in their kitchen.