Frigidaire 316902304 Air circulation in the oven, Baking layer cakes with 1 or 2 oven racks

Page 9

Air circulation in the oven

For best baking results allow 2-4" (5-10 cm) around the cookware for proper air circulation and be sure pans and cookware do not touch each other, the oven door, sides or back of the oven cavity. Hot air must be able to circulate around the pans and cookware in the oven for even heat to reach around the food.

Baking layer cakes with 1 or 2 oven racks

For best results when baking cakes using 2 oven racks, place cookware on rack positions 2 & 5 (See Fig. 1). For best results when using a single oven flat rack, place cookware on rack positions 2, 3 or 4 (See Fig. 2).

Fig. 1

Fig. 2

About the ceramic glass cooktop

The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element underneath. Be sure to match the pan size with the diameter of the element outline on the cooktop and only flat-bottomed cookware should be used.

The type and size of cookware, the number of surface elements in use and their settings are all factors that will affect the amount of heat that will spread to areas beyond the surface elements. The areas surrounding the elements may become hot enough to cause burns.

About the radiant surface elements

The element temperature rises gradually and evenly. As the temperature rises, the element will glow red. To maintain the selected setting the element will cycle ON and OFF. The heating element retains enough heat to provide a uniform and consistent heat during the off cycle.

For efficient cooking, turn OFF the element several minutes before cooking is complete. This will allow residual heat to complete the cooking process.

BEFORE SETTING OVEN CONTROLS

Element ON & hot surface indicator lights

Your appliance is equipped with two different types of radiant surface control indicator lights that will glow on the backguard — the Element On indicator light and the Hot Surface indicator lights (See Fig. 3).

The Element ON indicator lights are located on the control panel above each radiant element control knob and will glow when a surface element is turned ON. A quick glance at this indicator light after cooking is an easy check to be sure ALL surface controls are turned OFF. The Hot Surface indicator light located on the control panel will glow when any surface cooking area heats up and will remain on until the glass cooktop has cooled to a MODERATE level.

element ON

 

indicator

hot

light

surface

 

indicator

 

light

Fig. 3

NOTES

Radiant elements have a limiter that allows the element to cycle ON and OFF, even at the HI setting. This helps to prevent damage to the ceramic smoothtop. Cycling at the HI setting is normal and will occur more often if the cookware is too small for the radiant element or if the cookware bottom is not flat.

Be sure to read the detailed instructions for ceramic glass cooktop cleaning in the General Care & Cleaning and Before You Call checklist sections of this Use & Care Manual.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Use&Care Product Record and Registration ContentsDefinitions Important Safety InstructionsImportant Instructions for Using Your Oven SELF-CLEANING Ovens Your electric range features include Features AT a GlanceOven vent location Before Setting Oven ControlsTypes of oven racks Removing, replacing & arranging racksEffortless Oven Rack system To assemble the Effortless Oven Rack systemSpecial dark coating on the left and right rack Air circulation in the oven Element on & hot surface indicator lightsBaking layer cakes with 1 or 2 oven racks About the ceramic glass cooktopUsing proper cookware Before Setting Surface ControlsTypes of cooktop elements Cookware material typesSuggested radiant surface element settings Setting Surface ControlsSingle radiant surface elements all models To operate the single radiant elementTo operate a dual radiant element Quick boil feature some modelsMed Home Canning Minimum & maximum control settings Feature Min. temp. /time Max. temp. /timeOven Control Functions Setting the clock Setting Oven ControlsSetting 12 or 24 hour display modes Changing oven temperature displaySetting oven lockout Setting a silent control panelSetting the minute timer Add a minute featureSetting bake Setting quick preheatSetting bake time When the set bake time runs outSetting Oven Controls Convect roast all models Benefits of the convect featureSuggestions for convect baking Press convectSetting convect convection convert Convect broil some modelsSuggestions for convect broil Broil Suggested broil settings table electric ovenTo set broil Step Press Leave the oven door openSetting chicken nuggets feature Setting pizza featureSetting chicken nuggets feature cont’d Setting keep warmExample increase the oven temperature by 30F Step Press Adjusting the oven temperatureExample decrease the oven temperature by 30F Step Press Operating the oven lightTo Set the Sabbath Feature for use on If a timed bake or delayed timed bake is neededBake time and delay start pads To Set the Sabbath Feature cont’d SELF-CLEANING Self-cleaningAdhere to the following self-clean precautions When the self-clean cycle has completed Press delay startCleaning recommendation table Care & CleaningDo not Cooktop maintenance Cooktop cleaningFor light to moderate soil For heavy, burned on soilCooktop cleaning cont’d Replacing the oven lightTo replace the oven light bulb Removing and replacing the lift-off oven door To remove oven doorTo replace oven door Problem Solution Cleaningsection Used. See Cooktop Cleaning and Maintenance in the CareDisclaimer of Implied Warranties Limitation of Remedies Major Appliance Warranty

316902304 specifications

The Frigidaire 316902304 is a high-quality oven burner assembly that serves as a crucial component in the operation of various Frigidaire cooktops and ranges. Designed with efficiency and reliability in mind, this burner assembly ensures an even and consistent heating experience, making it easier to prepare meals to perfection.

One of the main features of the Frigidaire 316902304 is its construction from durable materials designed to withstand the rigors of daily cooking. This high-grade metal not only contributes to the longevity of the product but also supports optimal heat distribution across the cooking surface, allowing for even cooking results. The design facilitates easy installation, enabling users to replace worn-out or damaged burners effortlessly, ensuring minimal downtime in the kitchen.

Incorporating advanced technologies, the Frigidaire 316902304 utilizes modern engineering techniques that enhance cooking performance. It boasts efficient energy consumption, reducing overall cooking times and energy bills. This oven burner assembly features compatibility with various types of fuel, including natural gas and propane, which gives consumers the flexibility to choose the best option for their cooking needs.

Another significant advantage of this burner assembly is its compatibility with a wide range of Frigidaire models. This versatility makes it an ideal choice for homeowners, professional chefs, or anyone needing a reliable burner to enhance their cooking experience. The burner is designed to fit seamlessly into a range of Frigidaire appliances, making it easy to upgrade or replace.

In terms of safety features, the Frigidaire 316902304 has built-in mechanisms to prevent flame blowout, ensuring a safe cooking environment. This aspect is particularly important for families with children and pets, as it minimizes the risk of accidents in the kitchen.

The Frigidaire 316902304 is also designed for easy cleaning, with a smooth surface that allows for quick wipe-downs and maintenance. With its robust design, energy efficiency, compatibility, and safety features, the Frigidaire 316902304 is an essential component for anyone looking to enhance their cooking experience while ensuring durability and performance in their kitchen.
Top Page Image Contents