Frigidaire 318205852 Setting SELF-CLEAN Cycle Time Length, When the Self-Clean Cycle is Completed

Page 27

SETTING SELF-CLEAN CYCLE TIME LENGTH

The SELF CLEAN pad controls the Self-Cleaning feature. If you are planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours to complete.

*It is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for heavy soils (to assure satisfactory results).

To set the controls for a 3 hour Self-Cleaning cycle

to start immediately and shut off automatically

1.Be sure the clock is set with the correct time of day and the oven door is closed.

2.Press SELF CLEAN. “CLn” and “3:00” HR will show in the display. The control will automatically clean for a 3 hour period (default self-cleaning cycle time).

NOTE

If a 2 or 4 hour clean time is desired, press SELF CLEAN multiple times to toggle between 2, 3 or 4 hours.

3.Press START. “door Loc” will appear, a beep will sound and the “DOOR” and icon will flash; the letters “CLn” will remain on in the display.

4.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the “DOOR” indicator light and icon will stop flashing and remain on. Also, the oven

icon will appear in the display.

NOTE

Allow about 15 seconds for the oven door lock to close.

When the Self-Clean Cycle is Completed

1. “HOT” will appear in the display. The time of day, the “DOOR” and icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, “door OPn” will appear and the “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back

to the time of the day.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:

1.Press CANCEL.

2.The oven door can only be opened after the oven has cooled down for approximately 1 HOUR, “door OPn”

will appear and the “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back to the time of the day.

Setting OVEN controls

The SELF CLEAN and DELAY START pads controls the Delayed Self-Clean operation. The automatic timer will turn the oven on and off at the time you select in advance.

To set the control for the Self-Cleaning Cycle to start at a delayed time and shut off automatically (example: 3 hour self-clean cycle to start at 4:30)

1.Be sure the clock is set with the correct time of day and the oven door is closed.

2.Press SELF CLEAN. “CLn” and “3:00” HR will show in the display. The control will automatically clean for a 3 hour period.

NOTE

If a 2 or 4 hour clean time is desired, press SELF CLEAN multiple times to toggle between 2, 3 or 4 hours.

3.Press START. “door Loc” will appear, a beep will sound and the “DOOR” and icon will flash; the letters “CLn” will remain on in the display.

4.Press DELAY START. Enter the desired start time using the number pads 4 3 0.

5. Press START. “DELAY”, “DOOR” and icon icons will remain on.

6.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has

been locked the “DOOR” and icon indicator light will quit flashing and remain on.

7.The control will start the self-cleaning at the set start time, for the period of time previously selected. At that time, the icon “DELAY” will go out; “CLn” and oven icon will appear in the display as soon as the door is locked.

When the Self-Clean Cycle is Completed

1. “HOT” will appear in the display. The time of day, the “DOOR” and icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, “door OPn” will appear and the “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back

to the time of the day.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:

1.Press CANCEL.

2.The oven door can only be opened after the oven has cooled down for approximately 1 HOUR, “door OPn”

will appear and the “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back to the time of the day.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Use &Care Please Carefully read and save these instructions Welcome & CongratulationsRegister Your Product ProductWhat to do if YOU Smell GAS Important Safety InstructionsFor Your Safety DefinitionsKnow which knob controls each surface burner Important Instructions for Using Your cooktopImportant Safety Instructions for Cleaning Your Oven Important Safety Instructions for Using Your OvenGrounding instructions Conversion to liquefied petroleum gas or L.P. gas09-025-F Your gas built-in range FeaturesRemember do not Allow SPILLS, Food Before setting surface burnersAssembly of the surface burner caps and burner grates Control locations of the gas surface burnersFlame Size Type of Cooking Setting surface burnersSetting proper surface burner flame size Operating the gas surface controlsRecommended rack Positions Oven vent locationArranging oven racks Air circulation in the ovenTypes of oven racks To assemble the Effortless Oven Rack system Effortless oven rack systemSetting Oven controls Control pad featuresTemperature Visual Display Changing between 12 or 24 hour time of day display Minimum and Maximum Control Pad SettingsSetting the Clock Feature Minimum TEMP. /TIME Maximum TEMP. /TIMESetting Continuous Bake or 6 Hour Energy Saving Setting Temperature Display Fahrenheit or CelsiusSetting Silent Control Operation Setting Minute Timer Setting +1 Minute FeatureSetting Oven Lockout Feature To set the Bake Temperature to 375F Setting Power PreheatSetting Bake To set the Preheat temperature for 375FBenefits of Convection Bake Setting Convection BakeTo set the oven for Convection Bake and temperature to 375F Convection Baking TipsConvection Roasting Tips Setting Convection CONVERsionSetting Convection Roast To set a Convection Roast Temperature of 375FPress Delay Start Setting Bake TimeSetting Delay Start When the timed bake finishesSetting Keep Warm Setting PizzaCancel Setting Favorite Setting Chicken NuggetsTo set a Broil of 500F Setting BroilBroiling Tips Oven Broiling Table RecommendationsSetting Oven Controls Oven light Adjusting Oven TemperatureTo adjust the oven temperature higher To adjust the oven temperature lowerSelf-cleaning Adhere to the following cleaning precautionsWhat to Expect during Cleaning Setting SELF-CLEAN Cycle Time Length When the Self-Clean Cycle is CompletedStopping or Interrupting a Self-Cleaning Cycle Operating the keep warm drawer Setting keep warm drawer controlKeep warm drawer temperature selection Keep warm drawer rack positionsCleaning various parts of your appliance Care & Cleaning Cleaning ChartCare & Cleaning Cleaning the cooktop, burner caps & gratesCare and cleaning of stainless steel Removing and replacing the lift-off oven door Changing oven lightBe Sure Oven is Cool Pull up latch with finger Right Glide To remove and replace keep warm drawerTo Replace Keep Warmer Drawer Push down latch with fingerOven baking Occurrence Possible CAUSE/SOLUTION Cooking operation Self-cleaning cycleSoil not completely removed after self- cleaning cycle Fan noise duringDisclaimer of Implies Warranties Limitation of Remedies Exclusions This warranty does not cover the following

318205852 specifications

The Frigidaire 318205852 is a high-quality oven igniter that has become a favored choice for many homeowners and professional chefs alike. This essential component plays a crucial role in the ignition process of gas ovens, ensuring that the appliance operates efficiently and safely. The reliability of the 318205852 makes it a great replacement part for those in need.

One of the standout features of the Frigidaire 318205852 is its impeccable build quality. Made from durable materials, it is designed to withstand high temperatures and the rigors of frequent use. This robustness ensures that it has a long service life, reducing the need for frequent replacements and saving on maintenance costs in the long run.

The igniter utilizes advanced technology to provide consistent and efficient performance. It has a rated voltage of 120 volts and works seamlessly within the gas oven system. This compatibility ensures that it can be easily integrated into a variety of Frigidaire models, making it a versatile choice for many users.

An important characteristic of the Frigidaire 318205852 is its ease of installation. Even those who may not be professionally trained can install the igniter with a bit of guidance. Clear instructions accompany the product, and the igniter is designed for a straightforward replacement process. This user-friendly feature minimizes downtimes for those who rely on their ovens.

In terms of safety, the Frigidaire 318205852 meets rigorous standards for quality and reliability. It is engineered to prevent potential fire hazards that can arise from faulty ignition systems. This focus on safety ensures peace of mind for users, knowing they are operating a dependable appliance.

Furthermore, the performance of the Frigidaire 318205852 contributes to improved energy efficiency, which is increasingly important for environmentally-conscious consumers. By providing reliable ignition, it helps to ensure that gas consumption is optimized, leading to lower energy bills and a reduced carbon footprint.

In conclusion, the Frigidaire 318205852 igniter is a critical component that stands out for its durability, ease of installation, and safety features. For anyone in need of a reliable igniter for their gas oven, this model is an excellent choice that offers peace of mind, efficient operation, and long-lasting performance.
Top Page Image Contents