Frigidaire 318205852 manual Removing and replacing the lift-off oven door, Changing oven light

Page 31
Most oven

Removing and replacing the lift-off oven door

CAUTION

The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.

To Remove Oven Door:

1.Open oven door completely (horizontal with floor -

See Figure 1) and remove connector arms (Effortless rack) from door (See page 12).

2.Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Figure 2). A tool such as a small flat-blade screwdriver may be required.

3.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - See Figure 3).

4.Close the door to the broil stop position (the oven door will stop into this position just before fully closing).

5.With the oven door in the broil stop position, lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 4).

To Replace Oven Door:

1.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - See Figure 3).

2.Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 4). The hook of the hinge arms must be fully seated onto the roller pins.

3.Fully open the oven door (horizontal with floor - See

Figure 1).

4.Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges (See Figure 2) to the locked position.

5.Close the oven door.

Door Hinge locations

with oven door fully open

Care & Cleaning

Around

Oven door

 

Hinge

 

Figure 3

Figure 4

Special door care instructions - doors contain glass that can break.

Read the following recommendations:

1.Do not close the oven door until all the oven racks are fully in place.

2.Do not hit the glass with pots, pans, or any other ob- ject.

3.Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.

Changing oven light

CAUTION

Be sure the oven is unplugged and all parts are COOL before replacing the oven light bulb. Do not turn the oven light on during a self-cleaning cycle. High temperature will reduce lamp life.

On some models an interior oven light will turn on automatically when the oven is opened. The oven light may be turned on when the door is closed by using the oven light switch located on the Electronic Oven control. The oven light bulb is covered with a glass shield held in place by a wire holder. THIS GLASS SHIELD MUST ALWAYS BE IN PLACE WHEN THE OVEN IS IN USE.

CAUTION

BE SURE OVEN IS COOL

To Replace the Light Bulb:

1.

Turn the power off at the main source.

2.

Wear a leather-faced glove for protection against

3.

possible broken glass.

Replace bulb with a 40

4.

Watt appliance bulb only.

For self-cleaning oven,

Figure 1

Figure 2

press wire holder to one

side to release glass

shield, change bulb and be sure to replace glass shield.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Use &Care Please Carefully read and save these instructions Welcome & CongratulationsRegister Your Product ProductWhat to do if YOU Smell GAS Important Safety InstructionsFor Your Safety DefinitionsKnow which knob controls each surface burner Important Instructions for Using Your cooktopImportant Safety Instructions for Cleaning Your Oven Important Safety Instructions for Using Your OvenGrounding instructions Conversion to liquefied petroleum gas or L.P. gas09-025-F Your gas built-in range FeaturesRemember do not Allow SPILLS, Food Before setting surface burnersAssembly of the surface burner caps and burner grates Control locations of the gas surface burnersFlame Size Type of Cooking Setting surface burnersSetting proper surface burner flame size Operating the gas surface controlsRecommended rack Positions Oven vent locationArranging oven racks Air circulation in the ovenTypes of oven racks To assemble the Effortless Oven Rack system Effortless oven rack systemControl pad features Setting Oven controlsTemperature Visual Display Changing between 12 or 24 hour time of day display Minimum and Maximum Control Pad SettingsSetting the Clock Feature Minimum TEMP. /TIME Maximum TEMP. /TIMESetting Temperature Display Fahrenheit or Celsius Setting Continuous Bake or 6 Hour Energy SavingSetting Silent Control Operation Setting +1 Minute Feature Setting Minute TimerSetting Oven Lockout Feature To set the Bake Temperature to 375F Setting Power PreheatSetting Bake To set the Preheat temperature for 375FBenefits of Convection Bake Setting Convection BakeTo set the oven for Convection Bake and temperature to 375F Convection Baking TipsConvection Roasting Tips Setting Convection CONVERsionSetting Convection Roast To set a Convection Roast Temperature of 375FPress Delay Start Setting Bake TimeSetting Delay Start When the timed bake finishesSetting Pizza Setting Keep WarmCancel Setting Favorite Setting Chicken NuggetsTo set a Broil of 500F Setting BroilBroiling Tips Oven Broiling Table RecommendationsSetting Oven Controls Oven light Adjusting Oven TemperatureTo adjust the oven temperature higher To adjust the oven temperature lowerAdhere to the following cleaning precautions Self-cleaningWhat to Expect during Cleaning When the Self-Clean Cycle is Completed Setting SELF-CLEAN Cycle Time LengthStopping or Interrupting a Self-Cleaning Cycle Operating the keep warm drawer Setting keep warm drawer controlKeep warm drawer temperature selection Keep warm drawer rack positionsCleaning various parts of your appliance Care & Cleaning Cleaning ChartCleaning the cooktop, burner caps & grates Care & CleaningCare and cleaning of stainless steel Changing oven light Removing and replacing the lift-off oven doorBe Sure Oven is Cool Pull up latch with finger Right Glide To remove and replace keep warm drawerTo Replace Keep Warmer Drawer Push down latch with fingerOven baking Occurrence Possible CAUSE/SOLUTION Cooking operation Self-cleaning cycleSoil not completely removed after self- cleaning cycle Fan noise duringDisclaimer of Implies Warranties Limitation of Remedies Exclusions This warranty does not cover the following

318205852 specifications

The Frigidaire 318205852 is a high-quality oven igniter that has become a favored choice for many homeowners and professional chefs alike. This essential component plays a crucial role in the ignition process of gas ovens, ensuring that the appliance operates efficiently and safely. The reliability of the 318205852 makes it a great replacement part for those in need.

One of the standout features of the Frigidaire 318205852 is its impeccable build quality. Made from durable materials, it is designed to withstand high temperatures and the rigors of frequent use. This robustness ensures that it has a long service life, reducing the need for frequent replacements and saving on maintenance costs in the long run.

The igniter utilizes advanced technology to provide consistent and efficient performance. It has a rated voltage of 120 volts and works seamlessly within the gas oven system. This compatibility ensures that it can be easily integrated into a variety of Frigidaire models, making it a versatile choice for many users.

An important characteristic of the Frigidaire 318205852 is its ease of installation. Even those who may not be professionally trained can install the igniter with a bit of guidance. Clear instructions accompany the product, and the igniter is designed for a straightforward replacement process. This user-friendly feature minimizes downtimes for those who rely on their ovens.

In terms of safety, the Frigidaire 318205852 meets rigorous standards for quality and reliability. It is engineered to prevent potential fire hazards that can arise from faulty ignition systems. This focus on safety ensures peace of mind for users, knowing they are operating a dependable appliance.

Furthermore, the performance of the Frigidaire 318205852 contributes to improved energy efficiency, which is increasingly important for environmentally-conscious consumers. By providing reliable ignition, it helps to ensure that gas consumption is optimized, leading to lower energy bills and a reduced carbon footprint.

In conclusion, the Frigidaire 318205852 igniter is a critical component that stands out for its durability, ease of installation, and safety features. For anyone in need of a reliable igniter for their gas oven, this model is an excellent choice that offers peace of mind, efficient operation, and long-lasting performance.
Top Page Image Contents