Frigidaire 318205804 Effortless oven rack system, To assemble the Effortless Oven Rack system

Page 18

BEFORE SETTING OVEN CONTROLS

The Effortless™ oven rack system

Some models are equipped with a special oven rack system that automatically partially extends the oven rack from the interior oven glides to assist in easier access to your food items. This feature works whenever the oven door is opened or closed.

To assemble the Effortless™ Oven Rack system:

1.Locate all required parts. You will need the supplied oven rack (Effortless™ Oven Rack is a flat rack with a special dark coating on the left and right rack sides) and the 2 supplied chrome connector arms.

2.Open the oven door. Be sure the oven is completely cool before proceeding.

3.Place the oven rack in positions 1, 2 or 3 only (see previous page to verify positions). Be sure the rack connector brackets are at the rear of the range and pointing towards oven bottom (See Figure 2).

4.Assemble one connector arm at a time. With the oven door open and the oven rack in place, install one end of the connector arm to the hole in the door connec- tor bracket (Figure 1) and the other end in the hole in the rack connector bracket (Figure 2 and as in Figure 3). The oven rack may need to be adjusted in or out in the rack position to match the length of the connector arm.

5.While holding the connector arm in place, twist the connector arm so the ends of the connector arm point upwards (See Figures 4 & 5). The connector arm should now be locked into position.

6.Repeat steps 4 and 5 for the other connector arm.

7.Once both connector arms are properly in place, be sure to test the oven rack operation by gently closing the oven door. The oven rack should move in and out of the oven freely when the door is opened or closed.

CAUTION

REMOVE ALL OVEN RACKS and parts before starting a self-clean cycle. If the oven racks are left in the oven during the self-clean cycle, the glide ability of the Effortless Oven Rack system will be damaged and will cause all oven racks to loose their shiny finish and or turn blue. Remove ALL oven racks and clean according to instructions provided in the Care & Cleaning section of this manual.

Make sure the oven and oven racks are COMPLETELY cooled and safe to touch before attempting to assemble or disassemble the Effortless™ Oven Rack system.

Never pick up hot oven rack parts.

Door

Rack

connector

connector

bracket

bracket

 

Figure 2

Figure 1

Connector arm

Oven rack

Connector arm

Open oven door

Figure 3 - Assembly of the EffortlessTM oven rack

Connector arm

Figure 4

Connector arm

Left and right

 

door connector

 

brackets with

 

connector arm ends

Figure 5

shown in locked position

 

(pointing upwards)

 

Figure 6 - Effortless™ oven rack after assembly

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Use &Care Product Welcome & CongratulationsRegister Your Product Please Carefully read and save these instructionsImportant Safety Instructions DefinitionsImportant Instructions for Using Your cooktop Do Not Use Decorative Surface Burner CoversFor Glass Cooktop only Features AT a Glance mODEL a Your built-in range FeaturesFeatures AT a Glance mODEL B Features AT a Glance mODEL C About the ceramic glass cooktop Before Setting surface controlsElement on & hot surface indicator lights About the radiant surface elementsEsec hot element indicator message HE Available Esec display settingsEsec power failure indicator message PF Esec error indicator message ErUsing proper cookware Cookware material typesSetting surface controls To Operate the Single Radiant Surface ElementsTo Operate the Dual Surface Element To Operate the Bridge Surface Element Keep warm zone recommended food settings table Food Item Air circulation in the oven Oven vent locationArranging oven racks Recommended rack positionsTypes of oven racks Flat handle oven rack Offset oven rackEffortless oven rack system To assemble the Effortless Oven Rack systemNever pick up hot oven rack parts Setting Oven controls Control pad featuresTemperature Visual Display Minimum and Maximum Control Pad Settings Setting the ClockChanging between 12 or 24 hour time of day display Setting Continuous Bake or 6 Hour Energy Saving Setting Temperature Display Fahrenheit or CelsiusSetting Silent Control Operation Setting Minute Timer Setting + 1 Minute Feature some modelsSetting Lockout Feature To set the Preheat temperature for 375F Setting Quick or Powerplustm PreheatSetting Bake To set the Bake Temperature to 375FSetting Convection Bake Convection Baking TipsBenefits of Convection Bake To set a Convection Roast Temperature of 375F Setting Convection ConvertSetting Convection Roast Convection Roasting TipsConvection Broiling Tips Setting Convection Broil some modelsTo set a Convection Broil Temperature of 500F Electric Oven Convection Broiling Table RecommendationsWhen the timed bake finishes Setting Bake TimeSetting Delay Start BAKE, Convection BAKE, Bake Time and DelaySetting Pizza some models Setting Favorite some models Broiling Tips Electric Oven Broiling Table RecommendationsTo set a Broil of 500F Setting Oven Controls To adjust the oven temperature lower Adjusting Oven TemperatureTo adjust the oven temperature higher Oven lightSelf-cleaning Adhere to the following cleaning precautionsWhat to Expect during Cleaning When the Self-Clean Cycle is Completed Stopping or Interrupting a Self-Cleaning CycleKeep warm drawer rack positions Setting Keep warm drawer control If equippedKeep warm drawer temperature selection Operating the keep warm drawerCare & Cleaning Cleaning Chart Cleaning various parts of your applianceCleaning recommendations for the ceramic glass cooktop Care & CleaningCeramic glass cooktop cleaning & maintenance For light to moderate soilAluminum utensils Care and cleaning of stainless steelRemoving and replacing the lift-off oven door To Remove Oven DoorTo remove the hidden bake cover some models Changing oven lightTo Replace the Light Bulb To remove and replace keep warm drawer some models Oven baking Occurrence Possible CAUSE/SOLUTION AVOID Transportation Damage to Your Range Scratches or abrasionsMajor Appliance Warranty Exclusions This warranty does not cover the following

318205804 specifications

The Frigidaire 318205804 is an essential component for a variety of Frigidaire ranges, specifically designed to enhance the cooking experience. This replacement part, known as a burner assembly, plays a crucial role in delivering consistent heat to facilitate precise cooking and baking. Its durable construction ensures reliability, making it an excellent choice for homeowners looking to maintain their kitchen appliances in top-notch condition.

One of the standout features of the Frigidaire 318205804 is its high-quality design, which allows it to withstand the rigors of everyday cooking. Made from robust materials, the burner assembly is engineered to resist wear and tear, ensuring prolonged usage without the risk of malfunction. This durability not only extends the lifespan of your appliance but also ensures safety during operation, minimizing the chances of unexpected failures while cooking.

In terms of technology, the Frigidaire 318205804 is equipped with innovative features that promote efficient heat distribution. This ensures that food is cooked evenly and thoroughly, reducing cooking times and enhancing overall meal quality. The burner assembly is designed to fit seamlessly into compatible Frigidaire range models, making installation straightforward and hassle-free. Users can expect a perfect fit that integrates with the existing components of their range, helping to restore its performance to optimal levels.

Moreover, the Frigidaire 318205804 is engineered with user convenience in mind. Its easy-to-clean design simplifies maintenance, allowing users to keep their cooking surfaces free from grime and buildup. This practicality is particularly beneficial in busy kitchens where time and cleanliness are of the essence.

Additionally, the Frigidaire 318205804 is compatible with various Frigidaire range models, enhancing its versatility across different kitchen setups. This wide compatibility means that homeowners can rely on this replacement part to meet their cooking needs without having to invest in a new appliance.

In summary, the Frigidaire 318205804 stands out as a vital component that enhances cooking efficiency, safety, and convenience. With its durable construction, efficient heat distribution technology, and user-friendly design, it emerges as a reliable choice for anyone looking to maintain or improve their Frigidaire ranges. Investing in the 318205804 burner assembly is a decision aimed at achieving better cooking results and maximizing the lifespan of kitchen appliances.
Top Page Image Contents