Frigidaire 318205804 manual Setting Quick or Powerplustm Preheat, Setting Bake, Baking Tips

Page 23

Setting Quick or POWERPLUSTM Preheat

The PREHEAT pad controls the Quick or PowerPlusTM Preheat feature. The Preheat feature will bring the oven up to temperature and then indicate when to place the food in the oven. Use this feature when recipes call for preheating. Preheating is not necessary when roasting or cooking casseroles. The oven can be programmed to preheat at any temperature between 170°F to 550°F.

To set the Preheat temperature for 375°F

1.Arrange the interior oven racks.

2.Press PREHEAT. “350” will appear in the display. If a preheat of 350°F is needed, press START.

3.Press 3 7 5.

4.Press START. “PRE” will be displayed while the oven is preheating.

5.Press CANCEL when baking is complete or to cancel the preheat feature.

NOTE

After the oven has reached the desired temperature (this example, 375°F) the control will beep and the “PRE” light will turn off, the BAKE feature will activate and oven target temperature will be displayed. If you missed hearing the beep, you can tell that the oven has reached preheat temperature if you see the oven temperature showing in the oven display. Once the oven has preheated, place food in the oven. The preheat temperature can only be changed while the “PRE” message is displayed.

To change Preheat temperature while oven is preheating (ex: changing from 375°F to 425°F)

If it is necessary to change the preheat temperature while the oven is preheating to the original temperature:

1.While preheating, press PREHEAT. “375” will appear in the display.

2.Enter the new preheat temperature. Press 4 2 5.

3.Press START. “PRE” will be shown in the display.

Note: A beep will sound once the oven temperature reaches 425°F and the display will show “425°”.

4. When baking is complete press CANCEL.

Setting OVEN controls

Setting Bake

The BAKE pad controls normal baking. If a rapid preheating is preferred, refer to the POWERPLUSTM PREHEAT feature for instructions. The oven can be programmed to bake at any temperature from 170°F to 550°F.

Baking Tips:

•Preheat your oven before using the bake mode.

•During preheat, the 3 elements and the convection fan are used in cycle to quickly heat the oven.

•Use only one rack and center the pans as much as pos- sible on rack 2 or 3.

•If using two racks, place the oven racks in positions 2 and 4.

•Allow 2” to 4” (5,1 to 10,2cm) around the utensil(s) for proper air circulation.

•Be sure the pans do not touch each other, the door, sides or back of the oven.

To set the Bake Temperature to 375°F

1.Arrange interior oven racks.

2.Press BAKE, “350” will appear in the display. If a bake of 350°F is needed, press START.

3.Press 3 7 5.

4.Press START. The actual temperature will be displayed. A beep will sound once the oven temperature reaches 375°F and the display will show “375°”.

5.Place food in the oven.

NOTE

Pressing CANCEL will stop the feature at any time.

To change the Bake Temperature (example: changing from 375°F to 425°F)

1.After the oven has already been set to bake at 375°F and the oven temperature needs to be changed to 425°F, press BAKE and “375” will appear in the display.

2.Press 4 2 5.

3.Press START.

NOTE

While in preheat mode, the convection fan will be activated during the first rise of temperature to allow the oven to reach its target temperature faster. The Bake, Broil and Convection elements will also cycle for a better heat distribution.

NOTE

During the first rise of temperature, the convection fan will be activated to allow the oven to reach its target temperature faster. The Bake, Broil and Convection elements will also cycle for a better heat distribution.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Use &Care Please Carefully read and save these instructions Welcome & CongratulationsRegister Your Product ProductDefinitions Important Safety InstructionsDo Not Use Decorative Surface Burner Covers Important Instructions for Using Your cooktopFor Glass Cooktop only Your built-in range Features Features AT a Glance mODEL aFeatures AT a Glance mODEL B Features AT a Glance mODEL C About the radiant surface elements Before Setting surface controlsElement on & hot surface indicator lights About the ceramic glass cooktopEsec error indicator message Er Available Esec display settingsEsec power failure indicator message PF Esec hot element indicator message HECookware material types Using proper cookwareTo Operate the Single Radiant Surface Elements Setting surface controlsTo Operate the Dual Surface Element To Operate the Bridge Surface Element Keep warm zone recommended food settings table Food Item Recommended rack positions Oven vent locationArranging oven racks Air circulation in the ovenFlat handle oven rack Offset oven rack Types of oven racksNever pick up hot oven rack parts Effortless oven rack systemTo assemble the Effortless Oven Rack system Temperature Visual Display Setting Oven controlsControl pad features Changing between 12 or 24 hour time of day display Minimum and Maximum Control Pad SettingsSetting the Clock Setting Silent Control Operation Setting Continuous Bake or 6 Hour Energy SavingSetting Temperature Display Fahrenheit or Celsius Setting Lockout Feature Setting Minute TimerSetting + 1 Minute Feature some models To set the Bake Temperature to 375F Setting Quick or Powerplustm PreheatSetting Bake To set the Preheat temperature for 375FBenefits of Convection Bake Setting Convection BakeConvection Baking Tips Convection Roasting Tips Setting Convection ConvertSetting Convection Roast To set a Convection Roast Temperature of 375FElectric Oven Convection Broiling Table Recommendations Setting Convection Broil some modelsTo set a Convection Broil Temperature of 500F Convection Broiling TipsBAKE, Convection BAKE, Bake Time and Delay Setting Bake TimeSetting Delay Start When the timed bake finishesSetting Pizza some models Setting Favorite some models To set a Broil of 500F Broiling TipsElectric Oven Broiling Table Recommendations Setting Oven Controls Oven light Adjusting Oven TemperatureTo adjust the oven temperature higher To adjust the oven temperature lowerWhat to Expect during Cleaning Self-cleaningAdhere to the following cleaning precautions Stopping or Interrupting a Self-Cleaning Cycle When the Self-Clean Cycle is CompletedOperating the keep warm drawer Setting Keep warm drawer control If equippedKeep warm drawer temperature selection Keep warm drawer rack positionsCleaning various parts of your appliance Care & Cleaning Cleaning ChartFor light to moderate soil Care & CleaningCeramic glass cooktop cleaning & maintenance Cleaning recommendations for the ceramic glass cooktopTo Remove Oven Door Care and cleaning of stainless steelRemoving and replacing the lift-off oven door Aluminum utensilsTo Replace the Light Bulb To remove the hidden bake cover some modelsChanging oven light To remove and replace keep warm drawer some models Oven baking Occurrence Possible CAUSE/SOLUTION Scratches or abrasions AVOID Transportation Damage to Your RangeExclusions This warranty does not cover the following Major Appliance Warranty

318205804 specifications

The Frigidaire 318205804 is an essential component for a variety of Frigidaire ranges, specifically designed to enhance the cooking experience. This replacement part, known as a burner assembly, plays a crucial role in delivering consistent heat to facilitate precise cooking and baking. Its durable construction ensures reliability, making it an excellent choice for homeowners looking to maintain their kitchen appliances in top-notch condition.

One of the standout features of the Frigidaire 318205804 is its high-quality design, which allows it to withstand the rigors of everyday cooking. Made from robust materials, the burner assembly is engineered to resist wear and tear, ensuring prolonged usage without the risk of malfunction. This durability not only extends the lifespan of your appliance but also ensures safety during operation, minimizing the chances of unexpected failures while cooking.

In terms of technology, the Frigidaire 318205804 is equipped with innovative features that promote efficient heat distribution. This ensures that food is cooked evenly and thoroughly, reducing cooking times and enhancing overall meal quality. The burner assembly is designed to fit seamlessly into compatible Frigidaire range models, making installation straightforward and hassle-free. Users can expect a perfect fit that integrates with the existing components of their range, helping to restore its performance to optimal levels.

Moreover, the Frigidaire 318205804 is engineered with user convenience in mind. Its easy-to-clean design simplifies maintenance, allowing users to keep their cooking surfaces free from grime and buildup. This practicality is particularly beneficial in busy kitchens where time and cleanliness are of the essence.

Additionally, the Frigidaire 318205804 is compatible with various Frigidaire range models, enhancing its versatility across different kitchen setups. This wide compatibility means that homeowners can rely on this replacement part to meet their cooking needs without having to invest in a new appliance.

In summary, the Frigidaire 318205804 stands out as a vital component that enhances cooking efficiency, safety, and convenience. With its durable construction, efficient heat distribution technology, and user-friendly design, it emerges as a reliable choice for anyone looking to maintain or improve their Frigidaire ranges. Investing in the 318205804 burner assembly is a decision aimed at achieving better cooking results and maximizing the lifespan of kitchen appliances.
Top Page Image Contents