Frigidaire FGGF3030PF To assemble the Effortless Oven Rack system

Page 9

Effortless™ Oven Rack system

Some models are equipped with a special oven rack system that automatically partially extends the oven rack from the interior oven glides to assist in easier access to your food items. This feature works whenever the oven door is opened or closed.

To assemble the Effortless™ Oven Rack system:

1.

Locate all required parts. You will need the supplied

 

oven rack (Effortless™ Oven Rack is a flat rack with a

 

special dark coating on the left and right rack

 

sides) and the 2 supplied chrome connector arms.

2.

Open the oven door. Be sure the oven is completely

 

cool before proceeding.

3.

Place the oven rack in positions 2, 3 or 4 only (see

 

previous page to verify positions).Be sure the rack

 

connector brackets are at the rear of the range and

 

pointing towards oven bottom (See Fig. 2).

4.

Assemble one connector arm at a time. With the oven

 

door open and the oven rack in place, install one end of

BEFORE SETTING OVEN CONTROLS

IMPORTANT

Only the Effortless™ Oven Rack system should be used in oven rack position 2. Placing ANY other rack in oven rack position 2 will prevent the oven door from fully closing and may damage the oven door, oven cavity or the door connector brackets.

If the rack system is not assembled with the connector arms the Effortless™ Oven rack may be used in oven rack positions 2 thru 6. Do not attempt to use the Effortless™ Oven rack in rack position 1.

door

rack connector

connector

bracket

bracket

 

 

the connector arm to the hole in the door connector

 

bracket (Fig. 1) and the other end in the hole in the

 

rack connector bracket (Fig. 2 and as in Fig. 3). The

 

oven rack may need to be adjusted in or out in the rack

 

position to match the length of the connector arm.

5.

While holding the connector arm in place, twist the

 

connector arm so the ends of the connector arm point

 

upwards (See Figs. 4 & 5). The connector arm should

 

now be locked into position.

6.

Repeat steps 4 and 5 for the other connector arm.

7.

Once both connector arms are properly in place, be

Fig. 1

connector

arm

Fig. 3 - assembly of the Effortless™ Oven Rack

Fig. 2

oven rack

sure to test the oven rack operation by gently closing

the oven door. The oven rack should move in and out of

the oven freely when the door is opened or closed.

CAUTION

REMOVE ALL OVEN RACKS and accessories before starting a self-clean cycle. If the oven racks are left in the oven during the self-clean cycle, the glide ability of the Effortless™ Oven Rack system will be damaged and will cause oven racks to loose their shiny finish and or turn blue. Remove ALL oven racks and clean according to instructions provided in the Care & Cleaning section of this manual.

Make sure the oven and oven racks are COMPLETLY cool and safe to touch before attempting to assemble or disassemble the Effortless™ Oven Rack system. Never pick up hot oven rack parts.

open oven

connector

door

arm

connector arm

Fig. 4

connector

arm

Fig. 5

left and right

door connector

brackets

with connector arm ends shown in locked position (pointing upwards)

Fig. 6 - Effortless™ Oven Rack after assembly

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Use&Care Product Record and Registration ContentsImportant Safety Instructions DefinitionsTip Over Hazard Important Safety Instructions Important Instructions for Using Your Cooktop Conversion to Liquefied Petroleum Gas Grounding InstructionsYour gas range features include Features AT a GlanceBefore Setting Oven Controls Effortless Oven Rack system To assemble the Effortless Oven Rack systemSpecial dark coating on the left and right rack Using proper cookware Set proper burner flame size Before Setting Surface ControlsCorrect flame setting Incorrect flame setting Cookware material typesSetting surface controls Setting Surface ControlsSetting a surface burner Home CanningOven Control Functions Read the Instructions Carefully Before Using the OvenSetting the clock Setting Oven ControlsChanging temperature display F or C Setting a silent control panelSetting the minute timer Setting oven lockoutTo set the oven lockout feature for models with Quick Bake To change the timer while it is in useSetting timed bake and delayed timed bake features Setting bakeTo change the oven temperature after bake has started To set bakeWhen the set bake time runs out Setting Quick Bake How Quick Bake worksSuggestions for Quick Bake Suggested broil settings table gas oven Setting broilTo set Broil Close the oven doorAdjusting the oven temperature To adjust oven temperatureOperating the oven light SELF-CLEANING Self-cleaningAdhere to the following self-clean precautions Stopping or interrupting a self-clean cycle Setting a self-clean cycleWhen the self-clean cycle has completed Cleaning recommendation table Care & CleaningReplacing oven light Cleaning the cooktop and surface burnersRemoving and replacing the lift-off oven door To remove oven doorTo replace oven door Care & Cleaning section Problem SolutionBefore YOU Call Solutions to common problems Exclusions This warranty does not cover the following Major Appliance Warranty

FGGF3030PF specifications

The Frigidaire FGGF3030PF is a modern freestanding gas range that brings versatility and efficiency to your cooking experience. This appliance combines style, function, and advanced features to help home chefs create culinary masterpieces.

One of the standout features of the FGGF3030PF is its 5-burner cooktop. This design offers a variety of burner sizes, accommodating everything from small saucepans to large stock pots. The large 18,000 BTU burner is perfect for searing and boiling, while the 5,000 BTU simmer burner allows for gentle heat, which is ideal for delicate sauces or melting chocolate. The continuous cast-iron grates provide durability and stability, making it easy to slide pots and pans across the surface without lifting.

The range is equipped with a spacious 5.0 cubic foot oven, which is large enough to handle multiple dishes simultaneously, perfect for family meals or entertaining guests. The oven features even baking technology, ensuring consistent results every time by evenly distributing heat. This is essential for achieving perfectly baked goods and evenly roasted meats.

The Frigidaire FGGF3030PF also boasts a true convection feature, which circulates heated air throughout the oven, reducing cooking time and promoting even browning. This technology is a game changer for busy home cooks, as it allows for faster meal preparation without sacrificing quality.

In terms of design, the stainless steel finish of the FGGF3030PF adds a sleek and modern look to any kitchen. The range is not only aesthetically pleasing, but it is also easy to clean, thanks to the smooth surface and removable grates. The oven door includes a large window, making it easy to monitor your food without opening the door and disrupting the cooking process.

Another notable aspect of the FGGF3030PF is its self-cleaning feature. This convenient option saves time and effort by using high temperatures to burn off food residue, leaving the oven clean and ready for the next meal.

Additionally, the Frigidaire FGGF3030PF is equipped with a built-in timer and multiple oven settings, enabling you to cook a variety of dishes with precision and control. With its blend of advanced features, ample cooking space, and elegant design, the Frigidaire FGGF3030PF is an excellent choice for those looking to enhance their kitchen and cooking experience. Whether you're a novice or an experienced chef, this gas range provides the tools necessary to create delicious meals efficiently.
Top Page Image Contents