Frigidaire 318205258 Setting Continuous Bake or 12 Hour Energy Saving

Page 18

USER PREFERENCES

SETTING CONTINUOUS BAKE OR 12 HOUR ENERGY SAVING

The TIMER pad controls the Continuous Bake or 12 Hour Energy Saving features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 12 hours. The oven can be programmed to override this feature for Continuous Baking.

To set the control for Continuous Bake or 12 Hour Energy Saving features

1.Press and hold TIMER for 6 seconds.

After 6 seconds "12hr" or "--h"will appear in the display and the control will beep once.

2.Press or pad to switch between the 6 Hour Energy Saving and continuous bake features.

Note: "12hr" in the display indicates the control is set for the 12 Hour Energy Saving mode and "- -h"indicates the control is set for the Continuous Bake feature.

3.Wait 4 seconds to accept the change (display will return to time of day) or press CANCEL pad to reject the change.

SETTING TEMPERATURE DISPLAY — FAHRENHEIT OR CELSIUS:

The BROIL pad controls the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.

To change display from Fahrenheit to Celsius or Celsius to Fahrenheit

1.Press BROIL pad and hold for 6 seconds. A beep will sound, "---"will appear and "BROIL" will flash in the display. After 6 seconds a beep will be heard and "F" or "C" will appear in the display. If "F" appears, the display is set to show temperatures in Fahrenheit. If "C" appears, the display is set to show temperatures in Celsius.

2.Press or pad to switch between Fahrenheit or Celsius display modes. The display will show either

"F" or "C".

3.Wait 4 seconds to accept the change or press CANCEL pad to reject the change.

SETTING THE CLOCK

The SET CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash.

To set the clock (example below for 1:30)

1.Press SET CLOCK. "CLO" will appear in the display.

2.Press or pad to set the correct time of day. Wait 5 seconds to accept the change or press the CANCEL pad to reject the change. The new time of day will appear in the display.

CHANGING BETWEEN 12 OR 24 HOUR TIME OF DAY DISPLAY

1.Press and hold SET CLOCK for 6 seconds. "CLO" will appear in the display.

2.CONTINUE holding the pad until "12h" or "24h" appears in the display and the control beeps once.

3.Press or pad to switch between the 12 and 24 hour time of day display. The display will show either "12h" or "24h".

4.Wait 5 seconds to accept the change or press CANCEL pad to reject the change.

5.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Use &Care Welcome & Congratulations ProductPlease Carefully Read and Save These Instructions Definitions Important Safety InstructionsFor Your Safety What to do if YOU Smell GASImportant Instructions for Using Your Cooktop Important Safety Instructions for Using Your Oven Important Safety Instructions for Cleaning Your OvenImportant Safety Notice Features AT a Glance Your Range FeaturesRemember Before Setting Surface ControlsLocations of the GAS Surface Burners Round Style BurnersOperating the GAS Surface Controls Setting Surface ControlsSetting Proper Surface Burner Flame Size Flame Size Type of CookingBefore Setting Oven Controls Control PAD Features Minimum and Maximum Control PAD SettingsFeature Minimum TEMP. /TIME Maximum TEMP. /TIME Setting ADD a Minute Feature Setting the ClockSetting Minute Timer Changing Between 12 or 24 Hour Time of DAY DisplaySetting Oven Controls Setting BakeSetting Keep Warm When the timed bake finishes Setting Bake TimeSetting Delay Start To program the oven for a delayed Bake start timeTo Set the Controls for Broiling Setting Broil Upper Oven onlyBroiling Tips Electric Oven Broiling Table RecommendationsSetting Oven Controls Setting Lockout Feature Adjusting Oven Offset TemperatureSetting Silent Control Operation User PreferencesSetting Continuous Bake or 12 Hour Energy Saving Setting Temperature Display Fahrenheit or CelsiusSELF-CLEANING Adhere to the following cleaning precautionsWhat to Expect during Cleaning Press Delay Start Setting SELF-CLEAN Cycle Time LengthWhen the Self-Clean Cycle is Completed Stopping or Interrupting a Self-Cleaning CycleCare & Cleaning Cleaning Chart Cleaning Various Parts of Your ApplianceCare & Cleaning Cleaning the COOKTOP, Burner HEADS, Caps & GratesRemoving and Replacing the LIFT- OFF Oven Doors To Remove Oven DoorTo Replace Oven Door Oven Baking Occurrence Possible CAUSE/SOLUTION Poor baking results Self-cleaning cycleCleaning cycle Fan noise duringPage Major Appliance Warranty Exclusions This warranty does not cover the followingDisclaimer of Implies Warranties Limitation of Remedies
Top Page Image Contents