Frigidaire 316135917 important safety instructions To Start the Self-Clean Cycle Control Style

Page 13

Oven Control Styles 1 or 2 - Self Cleaning Oven

Control Style 1

Control Style 2

Note: If the oven is set to bake or broil, and then the Temperature Control Knob is set to CLEAN, it will not start the clean cycle until START is pressed again.

Use care when opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution when opening the door after the self-cleaning cycle is completed. The oven may still be VERY HOT.

To Start the Self-Clean Cycle - Control Style 1

The oven is programmed to run a 3 hour self-clean cycle.

1.Be sure the oven door is closed.

2.Turn Temperature Control Knob to CLEAN.

3.Push .

4.If the door is left open, the "LOCK" indicator light will flash, but the lock motor and clean cycle will not start. As soon as the controls are set and the door is closed, the motor driven lock will begin to close automatically and the "LOCK" indicator light will flash. DO NOT open the door while the light is flashing (it takes about 15 seconds for the lock to close).

When the Self-Clean Cycle is Completed (Control Style 1)

1.The "LOCK" indicator light will continue to glow.

2.Once the oven has cooled down for about 1 HOUR and the "LOCK" indicator light has gone completely out (and is not flashing), the oven door can be opened.

To Start the Self-Clean Cycle - Control Style 2

The oven can be programmed to run a 2 or 3 hour self-clean cycle. We recommend a 2 hour self-clean cycle for light soils and a 3 hour cycle for average to heavy soils (to assure satisfactory results).

1.Be sure the oven door is closed.

2.Turn Temperature Control Knob to CLEAN.

3.Push . "3:00" will appear in the display. (The oven will automatically program a 3 hour clean cycle.)

4.If you want a 2 hour clean cycle, press . "2:00" will appear in the display.

5.If the door is left open, the "LOCK" indicator light will flash and "dr" will glow in the display, but the lock motor and clean cycle will not start. As soon as the controls are set and the door is closed, the motor driven lock will begin to close automatically and the "LOCK" indicator light will flash. "CLn" will appear and remain in the display until the cleaning cycle is completed or cancelled. DO NOT open the door while the light is flashing (it takes about 15 seconds for the lock to close).

6.Pressat any time during the self-clean cycle to review remaining

cleaning time.

When the Self-Clean Cycle is Completed (Control Style 2)

1.The time of day will appear in the display window and the "LOCK" indicator light will continue to glow.

2.Once the oven has cooled down for about 1 HOUR and the "LOCK" indicator light has gone completely out (and is not flashing), the oven door can be opened.

Stopping or Interrupting a Self-Cleaning Cycle ( Control Style 1 or 2)

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire:

1.Turn Temperature Control Knob to OFF.

2.Once the oven has cooled down for about 1 HOUR and the "LOCK" indicator light has gone completely out (and is not flashing), the oven door can be opened.

3.Correct the condition which caused the smoking.

4.Restart the self-cleaning cycle once all conditions have been corrected.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Electric Range Register Your Product Product RegistrationVersión en español Record Your Model and Serial NumbersImportant Safety Instructions Important Instructions for Using Your Cook TOP Setting Type of Cooking Setting Surface Controls for Models with Coil ElementsTo Operate the Surface Element To Operate Simmer Select Surface Unit If equippedOven Vent Location Before Setting Oven ControlsArranging Oven Racks Oven Control Styles 1 or 2 Control Pad Functions Start Indicator LIGHT-FlashesControl Style Stop Time PAD- Used to setTo Set the Minute Timer Clock Style Setting the Clock Minute TimerOven Control Style To Set the Clock StyleTo Set the Controls for Normal Baking Oven Control Style 1 or 2 BakeFor a Delayed Start Time and Automatic Shut-Off Oven Control Style 2 Automatic TimerWhen the Set Bake Time Runs Out To Begin Baking Immediately with an Automatic Shut-OffClock Style Oven Control Styles 1 or 2 BroilClock Style To Broil Control Style 1 or Rack Position From Top FoodSelf-Cleaning Oven Oven Control Styles 1 or 2 Self Cleaning OvenAdhere to the following cleaning precautions When the Self-Clean Cycle is Completed Control Style To Start the Self-Clean Cycle Control StyleCleaning Various Parts of Your Range General CleaningSurfaces How to Clean To Clean Drip Bowls General Cleaning Coil Element ModelsTo Raise the Top for Cleaning Surface Elements and Drip BowlsChanging Cooktop and/or Oven Lights To Change the Oven Light some Self Cleaning ModelsTo Remove and Replace Oven Door To Change the Cooktop Light some modelsOven Control Style 1 or 2 Customizing Your Oven Performance To Adjust Oven Temperature Control StyleControl Style Avoid Service Checklist Cleaning cycle Self-cleaning cycle does not workPoor baking results Flames inside oven or smoking from ventRange Warranty
Top Page Image Contents