Frigidaire 316135917 Oven Control Style, Setting the Clock Minute Timer, To Set the Clock Style

Page 8

Oven Control Style 2 -

Control Style 2

Setting the Clock and

 

Minute Timer

 

For a silent control panel (Control Style 2 Only):

When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent operation. Push and hold STOP TIME for 7 seconds. After 7 seconds, the control will beep once. This will block the controls from sounding when a pad is pushed. To return the sound, push and hold STOP TIME again for 7 seconds until 1 beep is heard. Note: The control will return to the audible mode after a power outage.

To Set the Clock Style 2

When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".

1.Push .

2.Within 5 seconds, push and hold or until the correct time of day appears in the display.

Note: The clock cannot be changed during any timed bake or self-clean cycle.

To Set the Minute Timer Clock Style 2

1.Push .

2.Push to increase the time in one minute increments. Push and

hold to increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.

Note: If you push first, the timer will advance to 11 hours and 59 minutes.

3.The display shows the timer count down in minutes until one minute remains. Then the display will count down in seconds.

4.When the set time has run out, the timer will beep 3 times. It will then

continue to beep 3 times every 60 seconds until is pushed.

Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any other mode, the minute timer will be shown in the display. To view other functions, push the function pad for that mode.

To Change the Minute Timer while it is in use:

While the timer is active and shows in the display, push and hold or to increase or decrease the time.

To Cancel the Minute Timer before the set time has run out:

Push .

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Electric Range Product Registration Register Your ProductVersión en español Record Your Model and Serial NumbersImportant Safety Instructions Important Instructions for Using Your Cook TOP Setting Surface Controls for Models with Coil Elements Setting Type of CookingTo Operate the Surface Element To Operate Simmer Select Surface Unit If equippedArranging Oven Racks Before Setting Oven ControlsOven Vent Location Start Indicator LIGHT-Flashes Oven Control Styles 1 or 2 Control Pad FunctionsControl Style Stop Time PAD- Used to setSetting the Clock Minute Timer To Set the Minute Timer Clock StyleOven Control Style To Set the Clock StyleOven Control Style 1 or 2 Bake To Set the Controls for Normal BakingOven Control Style 2 Automatic Timer For a Delayed Start Time and Automatic Shut-OffWhen the Set Bake Time Runs Out To Begin Baking Immediately with an Automatic Shut-OffOven Control Styles 1 or 2 Broil Clock StyleClock Style To Broil Control Style 1 or Rack Position From Top FoodAdhere to the following cleaning precautions Oven Control Styles 1 or 2 Self Cleaning OvenSelf-Cleaning Oven To Start the Self-Clean Cycle Control Style When the Self-Clean Cycle is Completed Control StyleSurfaces How to Clean General CleaningCleaning Various Parts of Your Range General Cleaning Coil Element Models To Clean Drip BowlsTo Raise the Top for Cleaning Surface Elements and Drip BowlsTo Change the Oven Light some Self Cleaning Models Changing Cooktop and/or Oven LightsTo Remove and Replace Oven Door To Change the Cooktop Light some modelsControl Style To Adjust Oven Temperature Control StyleOven Control Style 1 or 2 Customizing Your Oven Performance Avoid Service Checklist Self-cleaning cycle does not work Cleaning cyclePoor baking results Flames inside oven or smoking from ventRange Warranty
Top Page Image Contents