GE JGBP40 manual Roasting Guide, Frozen Roasts, Why is my roast crumbling when I try to carve it?

Page 23

Questions and Answers

Q. Is it necessary to check for doneness with a meat thermometer?

A. Checking the finished internal temperature at the completion of cooking time is recommended. Temperatures are shown in Roasting Guide. For roasts over 8 lbs., check with thermometer at half- hour intervals after half the time has passed.

Q. Why is my roast crumbling when I try to carve it?

A. Roasts are easier to slice if allowed to cool 10 to 20 minutes after removing from oven. Be sure to cut across the grain of the meat.

www.GEAppliances.com

Q. Do I need to preheat my oven each time I cook a roast or poultry?

A. It is not necessary to preheat your oven.

Q. When buying a roast, are there any special tips that would help me cook it more evenly?

A. Yes. Buy a roast as even in thickness as possible, or buy rolled roasts.

Q. Can I seal the sides of my foil “tent” when roasting a turkey?

A. Sealing the foil will steam the meat. Leaving

it unsealed allows the air to circulate and brown the meat.

Roasting

ROASTING GUIDE

Frozen Roasts

Frozen roasts of beef, pork, lamb, etc., can be started without thawing, but allow 15 to 25 minutes per pound additional time (15 minutes per pound for roasts under 5 pounds, more time for larger roasts).

Make sure poultry is thawed before roasting. Unthawed poultry often does not cook evenly. Some commercial frozen poultry can be cooked successfully without thawing. Follow directions given on package label.

 

Oven

 

Approximate Roasting Time

Internal

Type

Temperature

Doneness

in Minutes per Pound

 

Temperature °F.

 

 

 

 

 

 

Meat

 

 

3 to 5 lbs.

6 to 8 lbs.

 

Tender cuts; rib, high quality sirloin

325°

Rare:

24–35

18–25

140°–150°†

tip, rump or top round*

 

Medium:

35–39

25–31

150°–160°

 

 

Well Done:

39–45

31–33

170°–185°

Lamb leg or bone-in shoulder*

325°

Rare:

21–25

20–23

140°–150°†

 

 

Medium:

25–30

24–28

150°–160°

 

 

Well Done:

30–35

28–33

170°–185°

Veal shoulder, leg or loin*

325°

Well Done:

35–45

30–40

170°–180°

Pork loin, rib or shoulder*

325°

Well Done:

35–45

30–40

170°–180°

Ham, precooked

325°

To Warm:

18–23minutes per pound (any weight)

115°–125°

 

 

 

 

 

 

Poultry

 

 

3 to 5 lbs.

Over 5 lbs.

 

Chicken or Duck

325°

Well Done:

35–40

30–35

185°–190°

Chicken pieces

350°

Well Done:

35–40

 

185°–190°

 

 

 

10 to 15 lbs.

Over 15 lbs.

In thigh:

Turkey

325°

Well Done:

16–22

12–19

185°–190°

*For boneless rolled roasts over 6 inches thick, add 5 to 10 minutes per pound to times given above.

†The U.S. Department of Agriculture says “Rare beef is popular, but you should know that cooking it to only 140°F. means some food poisoning organisms may survive.” (Source: Safe Food Book. Your Kitchen Guide. USDA Rev. June 1985.)

23

Roasting Guide

Image 23
Contents Installation Instructions If you received a damaged range… Save time and money. Before you request service…Help US Help YOU… Read this guide carefullyFor your safety, never use your appliance Important Safety InstructionsImportant Safety Instructions When You Get Your RangeSurface Cooking Save These Instructions Clean only parts listed in this Use and Care GuideFeatures and appearance vary Features of Your RangeFeatures of Your Range Surface Cooking Do not use a wok on a support ring. Placing Surface CookingTop-of-Range Cookware Cook Time ON/OFF. Press this for Timed Baking operations Features of Your Oven ControlYour Oven Control Oven CONTROL, Clock and TimerOven Control, Clock and Timer Using Your Oven Automatic Oven Shut Off Using Your OvenOven Shelves Shelf PositionsType of Food Shelf Position How to Set Your Range for BakingBaking Baking OvenDon’t Peek PiesCakes Baking PansTimed Baking How to Time BakeHow to Set Immediate Start and Automatic Stop Timed BakingQuick Reminder How to Set Delay Start and Automatic StopQuestions and Answers Can I use the minute timer during oven cooking?How to Set for Regular Baking/Roasting Sabbath FeatureHow to Exit the Sabbath Feature To Adjust the Thermostat Adjust the Oven ThermostatAdjust the Oven Thermostat Use of Aluminum Foil RoastingDual Shelf Cooking Roasting Guide Why is my roast crumbling when I try to carve it?Roasting Guide RoastingShould I salt the meat before broiling? Why are my meats not turning out as brown as they should?Broiling Oven door must be closed during broilingBroiling Guide Broiling GuideDo not rub or clean the door gasket Operating the SELF-CLEANING OvenBefore a Clean Cycle Clean cycle time is normally 4 hours How to Set the Oven for CleaningTo Stop a Clean Cycle After a Clean CycleWhy do I have ash left in my oven after cleaning? How to Set Delay Start of Cleaning on some modelsCan I clean the woven gasket around the oven door? Should there be any odor during the cleaning?Operating Care and CleaningSelf-Cleaning Oven Care CleaningFor proper ignition Sealed Burner Assemblies on some modelsOven Bottom Care and CleaningBurner Grates Cooktop SurfaceOutside of the door Lift-Off Oven DoorBroiler Pan and Grid Inside of the doorRemovable Storage Drawer on some models Oven Light Replacement on some modelsControl Panel and Knobs Stainless Steel Surfaces on some models Oven Air VentsRemovable Kick Panel on some models For Your Safety Installation InstructionsImportant Safety Instructions General Provide Adequate GAS Supply Rigid Pipe Hookup for Models Equipped with Sealed Burners IMPORTANT-Please read carefully Electrical RequirementsExtension Cord Cautions Electric Disconnect Yellow flames Electric Ignition ModelsTo remove the oven bottom Leveling the Range ⁄ 8 ″ Problem Possible Cause QUESTIONS? Before YOU Call for SERVICE…Do not Work Before You Call for ServiceFood does not No Matter What Brand GE Service Protection PlusWarranty Registration Department Box Louisville, KY Model Number Serial Number Consumer Product Ownership RegistrationWarranty Consumer Support GE Appliances Website

JGBP40, JR EGR3000, EGR3001 specifications

The GE EGR3001, JR EGR3000, and JGBP40 are three innovative industrial equipment models from General Electric, renowned for their efficiency and advanced engineering.

The GE EGR3001 represents a significant advancement in gas turbine technology. This model is designed for optimal performance in combined cycle power plants, where its high efficiency helps to reduce fuel consumption and greenhouse gas emissions. The EGR3001 features an advanced combustor design that facilitates low emissions and enhances fuel flexibility, allowing it to operate on various fuels, including natural gas and liquid fuels. This flexibility is crucial in today's energy markets, where energy source availability may fluctuate.

The EGR3001 is also equipped with sophisticated control systems that provide reliable performance even under varying load conditions. Its modular design simplifies maintenance, allowing for faster service times and lower operational costs. Additionally, the EGR3001's robust construction ensures durability and longevity, making it an excellent investment for power generators.

The JR EGR3000 is another remarkable model in GE's lineup, focusing on integration and performance in industrial settings. This unit combines the features of a gas turbine with superior steam generation capabilities. The JR EGR3000 prides itself on its compact design, which facilitates easy installation without compromising performance. It features advanced aerodynamics and heat recovery systems that maximize output while minimizing fuel consumption.

A key highlight of the JR EGR3000 is its digital twin technology, which allows operators to simulate and analyze performance in real-time. This technology provides valuable insights for maintenance planning and operational efficiency, leading to decreased downtime and optimally managed assets.

The JGBP40 is a unique offering, primarily designed for industrial applications requiring higher efficiency and reliability. It integrates advanced gearbox technology with high-speed turbine operations, facilitating increased torque and power output. The JGBP40 is designed for versatility, able to support various applications across different industries.

Its design incorporates advanced materials to withstand high-stress conditions, thereby increasing operational lifespan. The model also features smart diagnostics and predictive maintenance capabilities, allowing operators to monitor health and performance efficiently. This proactive approach minimizes unplanned outages and enhances overall productivity.

In summary, the GE EGR3001, JR EGR3000, and JGBP40 are testament to General Electric’s commitment to innovation, efficiency, and reliability in industrial equipment. Their advanced features and technologies not only optimize performance but also address modern energy challenges, making them essential assets for electricity producers and industrial users alike.