GE JB670, JB645, JB680 Selecting types of cookware, Troubleshooting Tips Consumer Support

Page 9

ge.com

The following information will help you choose cookware which will give good performance on glass cooktops.

SURFACE

COOKING

Never cook directly on the glass. Always use cookware.

OFF CENTER

Always place the pan in the center of the surface unit you are cooking on.

About the radiant surface units…

The radiant cooktop features heating units beneath a smooth glass surface.

NOTE: A slight odor is normal when a new cooktop is used for the first time. It is caused by the heating of new parts and insulating materials and will disappear in a short time.

NOTE: On models with light-colored glass cooktops, it is normal for the cooking zones to change color when hot or cooling down. This is temporary and will disappear as the glass cools to room temperature.

The surface unit will cycle on and off to maintain your selected control setting.

It is safe to place hot cookware on the glass surface even when the cooktop is cool.

Even after the surface units are turned off, the glass cooktop retains enough heat to continue cooking. To avoid overcooking, remove pans from the surface units when the food is cooked. Avoid placing anything on the surface unit until it has cooled completely.

DRAGGING

Do not slide cookware across the cooktop because it can scratch the glass—the glass is scratch-resistant, not scratchproof.

Water stains (mineral deposits) are removable using the cleaning cream or full-strength white vinegar.

Use of window cleaner may leave an iridescent film on the cooktop. The cleaning cream will remove this discoloration.

Don’t store heavy items above the cooktop. If they drop onto the cooktop, they can cause damage.

Do not use the surface as a cutting board

Selecting types of cookware.

SafetyInstructions Operating Instructions Care and Cleaning

Check pans for flat bottoms by using a straight edge.

Pans with rounded, curved, ridged or warped bottoms are not recommended.

Stainless Steel:

recommended

Aluminum:

heavy weight recommended

Good conductivity. Aluminum residues sometimes appear as scratches on the cooktop, but can be removed if cleaned immediately. Because of its low melting point, thin weight aluminum should not be used.

Copper Bottom:

recommended

Copper may leave residues which can appear as scratches. The residues can be removed, as long as the cooktop is cleaned immediately. However, do not let these pots boil dry. Overheated metal can bond to glass cooktops. An overheated copper bottom pot will leave a residue that will permanently stain the cooktop if not removed immediately.

Porcelain Enamel-Covered Cast Iron:

recommended

As long as the cookware is covered completely with porcelain enamel, this cookware is recommended. Caution is recommended for cast iron cookware that is not completely covered with smooth porcelain enamel, since it may scratch the glass ceramic cooktop.

Glass-Ceramic:

usable, but not recommended

Poor performance. May scratch the surface.

Stoneware:

usable, but not recommended

Poor performance. May scratch the surface.

9

Troubleshooting Tips Consumer Support

Image 9
Contents Write the model and serial numbers here Model # Serial # RangesSelf-Cleaning RadiantANTI-TIP Device Ge.com Safety Instructions OperatingInstructions Care and CleaningConsumer Support Cleaning Operating Instructions SafetySafety Instructions Consumer CareHow to Set Using the surface unitsTemperature Limiter Dual Surface Unit on some modelsInstructions Using the Warming ZoneTips Care Home Canning TipsSelecting types of cookware Troubleshooting Tips Consumer SupportOven Control, Clock and Timer Features and Settings Using the oven controlsPower Outage Care and Cleaning Troubleshooting Tips Consumer SupportCare and Cleaning SafetyTroubleshooting TipsHow to Set the Oven for Broiling Broiling Guide 4 Pass Broil ElementHi Broil Using the oven Consumer Support Troubleshooting TipsBroiling Guide 6 Pass Broil Element Tips Consumer Using the clock and timerSupport CareCleaning Safety InstructionsHow to Set an Immediate Start and Automatic Stop How to Set a Delayed Start and Automatic StopSpecial features of your oven control SafetyInstructionsHour Shut-Off Using the Sabbath Feature. on some models Consumer Support Troubleshooting TipsHow to Set Sabbath Feature for Regular Baking/Roasting How to Exit the Sabbath Feature Consumer Support Troubleshooting Tips Care Adjust the oven thermostat-Do it yourselfTo Adjust the Thermostat Type of margarine will affect baking performanceUsing the self-cleaning oven Before a Clean CycleHow to Set the Oven for Cleaning Consumer Support Troubleshooting Tips Care and CleaningHow to Delay the Start of Cleaning on some models To Stop a Clean CycleSafety Instructions Care and cleaning of the rangeConsumer Support Troubleshooting Tips Care Cleaning Operating InstructionsCleaning the Oven Door Oven VentOven Shelves Oven Light ReplacementStorage Drawer Removal Oven Heating ElementsOperating Instructions Safety Cleaning the glass cooktopNormal Daily Use Cleaning Burned-On ResidueMetal Marks and Scratches Cooktop SealTo Order Parts Problem Possible Causes What To Do Before You Call For Service…Food does not bake Clock and timer doOr roast properly Not workUnlock Oven not clean after During a clean cycleClean cycle Oven will not workA number Power outageOr letter flash DisplayLooking For Something More? AccessoriesWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Cleaning Troubleshooting Tips Consumer Support GE Electric Range WarrantyGE Will Provide What GE Will Not CoverParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio

JB680, JB645, JB670 specifications

The GE JB670, JB645, and JB680 are part of General Electric's popular line of electric ranges, designed to offer versatility and convenience for modern kitchens. Each model showcases distinct features and technologies, tailored to meet varying cooking needs while delivering reliable performance.

The GE JB670 is characterized by its spacious oven capacity, which allows for multiple dishes to be cooked simultaneously. It features a self-cleaning oven that simplifies maintenance by using high heat to burn away residue. Additionally, the JB670 includes a convection option, ensuring even cooking results by circulating hot air throughout the oven. The cooktop is equipped with smooth surface burners that provide precise heat control, making it ideal for both simmering and boiling. The LED display and touch controls enhance usability, giving users easy access to cooking settings.

In comparison, the GE JB645 stands out with its classic design and user-friendly features. While it may not have the convection technology seen in the JB670, this model still offers an ample oven capacity and a self-cleaning function. The JB645 is equipped with four burners, including a high-power burner for rapid boiling. An important feature of this range is the smooth ceramic glass cooktop, which not only adds elegance but also simplifies cleanup after cooking. The JB645 also incorporates a removable back guard that allows for versatile installations.

The GE JB680 is designed with smart technology features that appeal to the tech-savvy cook. This model comes with Wi-Fi connectivity, enabling users to monitor and control oven settings remotely through a smartphone app. It offers a large oven capacity similar to the JB670, along with convection cooking to achieve professional-level results at home. The model includes a temperature probe that ensures meats are cooked to perfection, eliminating guesswork. The sleek design of the JB680 features an edge-to-edge cooktop, providing more usable cooking space and completing the modern kitchen aesthetic.

In summary, the GE JB670, JB645, and JB680 each present unique features and technologies that cater to different cooking preferences and lifestyles. From expansive cooking capacities and innovative smart technologies to user-friendly controls, these electric ranges demonstrate GE's commitment to enhancing the cooking experience while maintaining high standards of performance and design.