GE PD900, PD968 D2 Install Stop Screw, Placing the Range into Opening, If provided

Page 10

Installation Instructions

D

Standard Installation Instructions cont.

D2 Install Stop Screw

These screws prevent the range from sliding out of position during operation.

 

 

 

Carefully mark the cabinet for the

 

 

 

 

location of the stop screws. Drill 1/8”

 

 

 

 

pilot holes into the cabinet, each side of

 

 

 

 

the range. (Make sure not to drill entirely

 

 

 

 

through the cabinet wall.) Carefully turn

 

 

 

 

the shoulder screws into the pilot holes

 

 

 

 

until they are tight.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Placing the Range into the

 

 

 

D3

 

 

 

 

Opening

 

 

 

 

 

 

 

 

It is suggested that two people lift the

 

 

 

 

range into place, carefully setting the

 

 

 

 

side metal flanges under the glass on

 

 

 

 

the edges of the countertop opening.

 

 

 

 

The protective channels must be in

 

 

 

 

place (if supplied) during this operation.

 

 

 

 

Lift and Slide Range

 

 

 

 

on Countertop

 

Countertop

Range

 

Placing the Range into the

D3

 

Opening (Continued)

 

Carefully slide the range toward the back of the opening. Stop pushing the Range when there is still a 4” gap at the front before flushing the Range with the countertop.

Countertop

Gap Approx. 4”

 

Gap Approx. 4”

D4

Remove the Protective Channels

 

(if provided)

Carefully remove the protective channels from the sides of the glass cooktop. This may require a slight lifting of the range to remove the weight of the range from the protective channels.

Glass Cooktop

Protective Cover

Remove Protective Cover From

Both Sides After Range Is In Cabinet

Cabinet

10

(Continued on following page)

Image 10
Contents Installation Installation Instructions Inspect Installation Location Pre-Installation ChecklistMove Range Indoors In Front of Cabinet Opening Pre-Installation Cutout and Required Clearances Standard Installation Preparation Standard InstallationElectrical Connections Using wire nuts. If the residence red Using wire nutsWith local code using wire nuts Connect the bare oven groundReinstall Junction box cover Anti-tip installation Standard Installation InstructionsD1 Installing the Anti-Tip Bracket Alternate Anti-tip installationPlacing the Range into Opening D2 Install Stop ScrewIf provided D6 Locating the Stop Screw D5 Attach the Lower TrimStop Screw Replacing the Oven Door Final Checklist Operation ChecklistAA Optional Maintop Filler or Back- guard Kit Island InstallationAlternate Construction Preparation Cabinets Over The RangePage 31-10622-3

PD968, PD900 specifications

The GE PD900 and PD968 models represent a significant advancement in the field of generator technology, offering exceptional performance and reliability for various applications within industrial and commercial sectors. Both models are designed to address the increasing demand for efficient power generation while ensuring minimal environmental impact.

One of the standout features of the GE PD900 and PD968 is their advanced design that enhances fuel efficiency. Equipped with cutting-edge technology, these generators utilize high-efficiency combustion systems that optimize fuel consumption, ultimately reducing operational costs for businesses. The PD900 delivers an impressive output of up to 900 kVA, while the PD968 takes it a step further with a capacity of 968 kVA, making them suitable for both medium and large-scale power requirements.

Incorporating the latest in generator control technology, the PD900 and PD968 models feature a sophisticated control panel that provides real-time monitoring and management of the generator’s performance. This allows operators to easily track critical metrics such as voltage, frequency, and load, facilitating timely maintenance and reducing the risk of unexpected failures.

These generators are also designed with a focus on durability and ease of operation. The robust construction and high-quality materials ensure longevity and reliability, even in the most demanding environments. Furthermore, the PD900 and PD968 come with an array of safety features, including automatic shut-off systems and overload protection, enhancing operational integrity.

An important characteristic of the GE PD900 and PD968 generators is their versatility. They can be tailored to meet specific power needs, whether for temporary usage in construction sites, as backup power for hospitals, or for continuous operation in manufacturing facilities. This adaptability makes them a preferred choice across multiple industries.

Moreover, both models comply with stringent environmental regulations, featuring lower emissions and noise levels compared to traditional generators. This commitment to sustainability not only helps organizations meet their environmental goals but also fosters a more pleasant working environment.

In summary, the GE PD900 and PD968 generators are engineered to deliver high performance, reliability, and efficiency. With their advanced technologies, superior features, and commitment to sustainability, they stand out as exemplary solutions for modern power generation needs. Businesses looking for dependable and efficient power sources will find that these models meet and exceed industry standards.