Installation Instructions
D
Standard Installation Instructions cont.
D5 Attach the Lower Trim
Attach the lower trim (supplied separately with the range) to the bottom of the vertical side trim with the 4 screws supplied.
| Attach 2 |
|
Side trim | screws |
|
| each side | Lower |
Lower |
| right end |
trim |
| of front |
|
| frame |
D6 Locating the Stop Screw
It is suggested that two people lift the range and carefully slide it towards the back of the opening. When the range is approximately 1” from the back of the opening, lift the front of the range approximatley 1/2” to clear the stop screw located in the sides of the cabinet. Slide the range until the range is seated into the opening.
Lower the front of the range onto the countertop.
| Check For Proper Installation of |
D7 | |
| the Stop Screw |
| |
| Look at both sides of the range under the |
| door. The stop screws must be located in |
| the notch on the sides of the range, and |
| not touch the top of the notch when the |
| range is fully seated on the countertop. If |
| the screws do not meet the requirements, |
| move the screws to a position that meets |
| these requirements. |
| (See illustration below.) |
Lower trim
Clear
|
|
|
|
|
|
|
|
|
| Notch in bottom | |
Shoulder screw | |||
|
| of side trim | |
11 | (Continued on following page) |