GE PD968, PD900 Standard Installation Instructions, D1 Installing the Anti-Tip Bracket

Installation Instructions

D

Standard Installation Instructions

D1 Installing the Anti-Tip Bracket

The anti-tip bracket is attached to the back of the Drop-In Range. It is designed to fit under the bottom of the countertop opening at the rear. Measure counter thickness at back of cutout to determine correct bracket location.

Select the proper position for the countertop thickness and move bracket to proper position. (Unit is supplied with bracket in position 1.)

1	For 3/4” Counter	4	For 3.5”
2	For 1.18” (3 cm) Counter	5	Alternate
3	For 1.5” Counter		(shown below)

Anti-Tip Bracket Location

anti-tip installation

Glass Cooktop

(Rear of Range)

Interior Wall
1/4” Min. Flat Area	Wall Stud
Glass
Maintop
	Countertop
	Thickness
Anti-Tip
Bracket
	Bottom of
Bottom of	Countertop
Countertop
to Engage
Bracket by	Wire Cover
1/2” Min.

alternate

anti-tip installation

Interior Wall	Wall Stud
Non-Kit Application	Countertop
Glass Maintop
	Surface
	10-3/8”
	Wire
Attachment	Cover
	1-1/2”
Position #5
Non-Kit Ap-
plication
Anti-Tip Bracket	Attachment
	Anchored To
	Wall Stud Is
	Required

*Attachment To Engage

Bracket By 1/2” Min.

9 (Continued on following page)