GE PD900, PD968 installation instructions Replacing the Oven Door

Page 12

Installation Instructions

D

Standard Installation Instructions cont.

Replacing the Oven Door

NOTE: The oven door is heavy. You may need help lifting the door high enough to slide it into the hinge slots. Do not lift the door by the handle.

 

Lift the oven door by

D8

 

placing one hand on

 

 

each side. The door is

 

heavy, so you may need

 

help. Do not lift the door

 

by the handle.

 

With the door at the same angle as

D9

 

the removal position (halfway between

 

 

the closed and broil stop position,

 

seat the notch of the hinge arm into

 

the bottom edge of the hinge slot.

 

The notch of the hinge arm must be

 

fully seated into the bottom of the slot.

Hinge Arm

Bottom Edge

of Slot

Hinge Notch

D10 Open the oven door as far as it will open.

 

Push the hinge locks up against the

D11

 

front frame of the oven cavity, to the

 

 

locked position.

 

Hinge in

 

Locked Position

Notch of Hinge

Securely Fitted into

Bottom of Hinge

Slot

D12 Close the oven door.

D13 Check for Proper Installation of Anti-Tip Bracket

Lower the oven door and gently apply medium force at the handle end until movement of the range is detected. Con- tinue pressing until the anti-tip bracket is engaged and movement stops. A small amount of movement is acceptable at the back of the range top, but it should be stable and not tip once the anti-tip bracket is engaged.

12

Image 12
Contents Installation Installation Instructions Pre-Installation Checklist Inspect Installation LocationMove Range Indoors In Front of Cabinet Opening Pre-Installation Cutout and Required Clearances Standard Installation Preparation Standard InstallationElectrical Connections Using wire nuts With local code using wire nutsUsing wire nuts. If the residence red Connect the bare oven groundReinstall Junction box cover Standard Installation Instructions D1 Installing the Anti-Tip BracketAnti-tip installation Alternate Anti-tip installationD2 Install Stop Screw Placing the Range into OpeningIf provided D5 Attach the Lower Trim D6 Locating the Stop ScrewStop Screw Replacing the Oven Door Final Checklist Operation ChecklistIsland Installation Alternate Construction PreparationAA Optional Maintop Filler or Back- guard Kit Cabinets Over The RangePage 31-10622-3

PD968, PD900 specifications

The GE PD900 and PD968 models represent a significant advancement in the field of generator technology, offering exceptional performance and reliability for various applications within industrial and commercial sectors. Both models are designed to address the increasing demand for efficient power generation while ensuring minimal environmental impact.

One of the standout features of the GE PD900 and PD968 is their advanced design that enhances fuel efficiency. Equipped with cutting-edge technology, these generators utilize high-efficiency combustion systems that optimize fuel consumption, ultimately reducing operational costs for businesses. The PD900 delivers an impressive output of up to 900 kVA, while the PD968 takes it a step further with a capacity of 968 kVA, making them suitable for both medium and large-scale power requirements.

Incorporating the latest in generator control technology, the PD900 and PD968 models feature a sophisticated control panel that provides real-time monitoring and management of the generator’s performance. This allows operators to easily track critical metrics such as voltage, frequency, and load, facilitating timely maintenance and reducing the risk of unexpected failures.

These generators are also designed with a focus on durability and ease of operation. The robust construction and high-quality materials ensure longevity and reliability, even in the most demanding environments. Furthermore, the PD900 and PD968 come with an array of safety features, including automatic shut-off systems and overload protection, enhancing operational integrity.

An important characteristic of the GE PD900 and PD968 generators is their versatility. They can be tailored to meet specific power needs, whether for temporary usage in construction sites, as backup power for hospitals, or for continuous operation in manufacturing facilities. This adaptability makes them a preferred choice across multiple industries.

Moreover, both models comply with stringent environmental regulations, featuring lower emissions and noise levels compared to traditional generators. This commitment to sustainability not only helps organizations meet their environmental goals but also fosters a more pleasant working environment.

In summary, the GE PD900 and PD968 generators are engineered to deliver high performance, reliability, and efficiency. With their advanced technologies, superior features, and commitment to sustainability, they stand out as exemplary solutions for modern power generation needs. Businesses looking for dependable and efficient power sources will find that these models meet and exceed industry standards.