Sherwood RVD-9090R operating instructions Enjoying Surround Sound, Theater Hall 1 Hall

D I G I T A L

DOLBY

ENJOYING SURROUND SOUND

Surround sound will not work properly if the signal passes through a graphic equalizer.

Please refer to your equalizer operating instructions for guidance on switching off (or defeating) the equalizer.

Select the desired surround mode.
When selecting the DTS or Dolby Surround mode.	When selecting a surround mode between
	THEATER, HALL 1 and HALL 2 modes.

DSP

MODE

or

or DSP MODE

ENGLISH

When playing program sources bearing the “ ”,

“ DOLBY ” or “ DOLBY SURROUND ” trademark such as video,

D I G I T A L

DVD or LD software, the DTS, Dolby Digital (AC-3) or Dolby Pro Logic mode is automatically selected according to the input signal.

When playing the Dolby Digital (AC-3) program sources encoded into 2 channel format, either the Dolby Pro Logic mode or the Dolby Digital (AC-3) mode is automatically selected according to the encoding process. (If the Dolby Digital (AC-3) mode is automatically selected, pressing the DTS/DOLBY SURROUND button will select the Dolby Pro Logic mode.)

To enjoy the DTS or Dolby Digital mode, be sure that the program source and the corresponding digital input are selected correctly. If not, no sound will be heard.

Each time the DSP MODE button is pressed, the surround mode changes as follows;

THEATER HALL 1 HALL 2

Playing the DTS or Dolby Surround program sources

(bearing the “ ”, “ ” or the

“ DOLBY SURROUND ” trademark) in THEATER, HALL 1 or HALL 2 mode will produce better surround effects.

When the 6 CH DIRECT is selected as input source, the surround mode cannot be selected.

When canceling the surround mode for normal stereo operation.

STEREO

STEREO

or

19