Sherwood RVD-9090R Listening to Radio Broadcasts, Auto tuning, Manual tuning

ENGLISH

LISTENING TO RADIO BROADCASTS

Auto tuning		2	Select the desired band.
Select the tuner.			BAND
1			MHz
INPUT SELECTOR			BAND FREQUENCY
TUNER
AUDIO
or		Each time this button is pressed, the band is changed
		to FM or AM.
		When pressing the BAND button without selecting
		the TUNER, the tuner will be selected automatically.
Select the tuning mode.		4	Press the TUNING/PRESET UP( ) or
3			DOWN( ) button for more than 0.5 second.
MODE			TUNING/PRESET
Each time this button is pressed, the mode changes		Then “AUTO” appears on the display. The tuner
		will now search until a station of sufficient
as follows;
		strength has been found. The display shows the
Tuning mode : “PRESET” goes off.
		tuned frequency and “TUNED”.
Preset mode : “PRESET” lights up.
		If the station found is not the desired one, simply
		repeat this operation.
		Weak stations are skipped during auto tuning.
Manual tuning
Manual tuning is useful when you already know the frequency of
the desired transmitter.
Perform the steps 1~3 in “Auto tuning” procedure and press the			TUNING/PRESET
TUNING/PRESET UP( ) or DOWN(	) button repeatedly until
the right frequency has been reached.

Presetting radio stations

You can store up to 30 preferred stations in the memory.

1	Tune in the desired station with auto or
	manual tuning.

Press the MEMORY/ENTER button.

2

MEMO/ENTER

“MEM” will flicker for 5 seconds.

20