GE JSP42, JSP47 owner manual Using the oven, Safety, Instructions Operating

Page 11

Using the oven.

www.GEAppliances.com

To avoid possible burns, place the racks in the desired position before you turn the oven on.

Safety

The oven has 7 rack positions.

Before you begin…

The racks have stops, so that when placed correctly on the supports (A through G), they will stop before coming completely out, and will not tilt.

When placing and removing cookware, pull the rack out until it stops.

To remove a rack, pull it toward you, tilt the front end up and pull it out.

To replace, place the end of the rack (stop-locks) on the support, tilt up the front and push the rack in.

CAUTION: When you are using the rack in the lowest position (A), you will need to use caution when pulling the rack out. We recommend that you pull the rack out several inches and then, using two pot holders, pull the rack out by holding the sides of it. The rack is low and you could be burned if you place your hand in the middle of the rack and pull all the way out. Be very careful not to burn your hand on the door when using the rack in the lowest position (A).

Instructions Operating

How to Set the Oven for Baking or Roasting

Instructions

Press the BAKE pad.

Press the number pads to set the desired temperature.

Press the START pad.

Check food for doneness at minimum time on recipe. Cook longer if necessary.

Press the CLEAR/OFF pad when cooking is complete.

Type of Food

Rack Position

Frozen pies (on cookie sheet)

C or D

Angel food cake

A

Bundt or pound cakes

B or C

Biscuits, muffins, brownies,

C or D

cookies, cupcakes,

 

layer cakes, pies

 

Casseroles

C or D

Turkey

A

Care and Cleaning

NOTE: A cooling fan may automatically turn on

If baking four cake layers at the same time,

and off to cool internal parts. This is normal, and

place two layers on rack B and two layers

the fan may continue to run even after the oven

on rack D. Stagger pans on the rack so

in turned off.

one is not directly above the other.

 

Center baking pans in the oven.

Preheating and Pan Placement

Preheat the oven if the recipe calls for it. Preheating is necessary for good results when baking cakes, cookies, pastry and breads.

To preheat, set the oven at the correct temperature. The control will beep when the oven is preheated and the display will show your set temperature.

This will take approximately 6 to 8 minutes.

Baking results will be better if baking pans are centered in the oven as much as possible. If baking with more than one pan, place the pans so each has at least 1 to 112″ of air space around it.

Troubleshooting Tips

Cut slits in the foil just like the grid.

Aluminum Foil

You can use aluminum foil to line the broiler pan and broiler grid. However, you must mold the foil tightly to the grid and cut slits in it just like the grid.

Without the slits, the foil will prevent fat and meat juices from draining into the broiler pan. The juices could become hot enough to catch on fire. If you

do not cut the slits, you are essentially frying, not broiling.

Do not use aluminum foil on the bottom of the oven.

Never entirely cover a rack with aluminum foil. This will disturb the heat circulation and result in poor baking.

A smaller sheet of foil may be used to catch a spillover by placing it on a lower rack several inches below the food.

11

Consumer Support

Image 11
Contents Model # Serial # RangesSelf-Cleaning ElectricAll ranges can tip and injury could result Consumer SupportSupport Safety InstructionsRadiant Surface Units Operating Instructions Care CleaningTroubleshooting Tips Instructions Using the surface unitsConsumer Support Troubleshooting Tips Care and Cleaning How to SetAbout the radiant surface units… Safety InstructionsCleaning Troubleshooting Tips Consumer Support Temperature LimiterSelecting types of cookware Observe the Following Points in Canning SafetyUsing a pressure canner Oven Control, Clock and Timer Features and Settings Using the oven controlsInstructions Operating Using the ovenSafety For HI Broil How to Set the Oven for BroilingBroiling Guide Broiling GuideTips Consumer Support Using the clock, timer and control lockoutHow to Set a Delayed Start and Automatic Stop Using the timed baking and roasting featuresSupport Troubleshooting Tips Care How to Set an Immediate Start and Automatic StopTo Adjust the Thermostat Adjust the oven thermostat-Do it yourselfCleaning Troubleshooting Tips Consumer Support Safety InstructionsBefore a Clean Cycle Using the self-cleaning ovenHow to Delay the Start of Cleaning After a Clean CycleFahrenheit or Celsius Temperature Selection Special features of your oven controlCare and Cleaning Consumer Support Troubleshooting TipsStart pad Care and Cleaning Troubleshooting Tips Consumer SupportCook and Hold Hour, 24-Hour or Clock BlackoutHow to Set for Regular Baking/Roasting Using the Sabbath FeatureCare and cleaning of the range Consumer Support Troubleshooting Tips Care Instructions Safety InstructionsTo remove the drawer Oven RacksStorage Drawer Removal on some models Broiler Pan and GridTo replace the cover Oven Light ReplacementOven Heating Elements To remove the coverOperating Instructions Care Cleaning the glass cooktopTips Consumer Support To Order Parts Operating Instructions SafetyMetal Marks and Scratches Damage from Sugary Spills and Melted PlasticBefore you call for service… Food does not Clock and timer doNot work Oven light doesCrackling or See the Using the self-cleaning oven sectionDuring a clean cycle Open after a Clean cycle Oven not clean afterUnable to get Power outageDisplay goes blank Display flashesConsumer Support Care and CleaningLooking For Something More? AccessoriesWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Will Provide GE Electric Range WarrantySafety Instructions Operating Instructions Troubleshooting Tips Consumer SupportReal Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances Website

JSP42, JSP47 specifications

The GE JSP47 and JSP42 are two of the latest advancements in the realm of high-efficiency heat pump water heaters. Designed for both residential and commercial applications, these models embody the perfect combination of efficiency, performance, and user-friendly features.

Starting with the GE JSP47, this model offers a remarkable 47-gallon capacity, suitable for households with varying hot water needs. One of its standout features is its Energy Factor (EF) rating of up to 3.75, which translates to significant energy savings over traditional electric water heaters. The JSP47 utilizes advanced heat pump technology, which extracts heat from the surrounding air and transfers it to the water. This process not only makes the unit extremely energy-efficient but also environmentally friendly, as it minimizes greenhouse gas emissions.

The JSP42, on the other hand, presents a slightly smaller capacity of 42 gallons, making it an excellent choice for smaller homes or those with less demanding hot water requirements. Despite its size, the JSP42 features similar technologies that enhance its efficiency and performance. With an impressive EF rating and a similar heat pump system, both models incorporate smart technology that optimizes performance based on the user's hot water consumption patterns.

Both the JSP47 and JSP42 are equipped with Wi-Fi connectivity, allowing users to monitor and control their water heater remotely through a dedicated smartphone app. This feature enhances convenience and provides real-time data on energy usage, contributing to better energy management and cost savings.

In terms of installation, both models boast a compact design and can be installed in a variety of locations, including garages, basements, and even closets. Furthermore, the units are engineered with noise reduction in mind, significantly minimizing operational noise compared to traditional water heaters.

Safety is a top priority for GE, and both the JSP47 and JSP42 include built-in safety features such as automatic shut-off and leak detection systems. These features work together to provide peace of mind, ensuring that users can trust their hot water supply without concerns for potential hazards.

In summary, the GE JSP47 and JSP42 water heaters are exemplary models that highlight GE’s commitment to cutting-edge technology, energy efficiency, and user comfort. With their advanced features, high energy factor ratings, and smart connectivity options, these heat pump water heaters stand out as ideal solutions for modern residential and commercial hot water needs.