GE JSP40AS, JSP39GR, JSP38GS Surface Unit Controls, How to Set the Controls Coil Select Control

Page 12

SURFACE UNIT CONTROLS

At both OFF and HI the control “clicks” into position. You may hear slight “clicking” sounds during cooking, indicating the control is keeping the surface units at the heat level or power level you set.

Switching heats to higher settings always results in a quicker change then switching to lower settings.

How to Set the Controls

Coil Select Control

ie ~

F●~‘

Push the knob and turn in either directions to the heat setting you want.

The control must be pushed in to set only from the OFF position. When the control is on any other ~osition than OFF, it may be ~otated without pushing in.

The left rear surface unit has 2 heating areas of different sizes that let you match the size of the unit to the size of the cookware you are using.

● To use the small (6”) surface unit, push in the bottom

portion of the rocker switch next to the control knob.

Push in and turn the control knob to desired setting.

● To use the large (9”) surface unit, push in the top

portion of the rocker switch. Push in and turn the

Be sure you turn the control knob to OFF when you finish cooking. An indicator light will glow when a surface unit is on.

control knob to desired setting.

CAUTION:

●Never cook directly on the glass. Always use cookware when cooking.

●Do not use surface as a cutting board.

●Do not slide cookware on the glass cooktop surface

because it may scratch the glass.

—

 

Cooking Guide for Using Heat Settings

HI—Used to begin cooking or to bring water to a boil. Reduce heat setting after water boils.

MEDIUM HIGH—(Setting halfway between HI and MED) Maintains a fast boil on large amounts of food.

MED—Saute and brown; keeps food at a medium boil or simmer.

MEDIUM LOW—(Setting halfway between MED and LO) Cook after starting at HI; cooks with little water in covered pan.

LO—Used for long slow cooking (simmering) to tenderize and develop flavors. Use this setting to melt butter and chocolate or to keep foods warm.

Cooktop temperatures increase with the number of surface units that are on. With 3 or 4 surface units turned on, surface temperatures are high, so be careful when touching the cooktop.

The HOT SURFACE light will glow when the cooktop is hot to the touch.

NOTE:

●At HI or MEDIUM HIGH, never leave f’ood unattended. Boilovers cause smoking; greasy spillovers may catch fire.

●At LO or MEDIUM LOW, melt chocolate, butter on small element.

c When a surface unit is turned on, the unit can be seen glowing red within a few seconds. The red glow will turn on and off (cycling) to maintain the selected heat setting. With poor cookware, you will see frequent cycling of the unit off and on. Good, flat cookware will minimize the cycling. See the Cooking Tips section.

●It is safe to place hot cookware from the oven or surface on the glass ceramic surface when it is cool. Hot cookware will not damage the surface.

~F

*(o

~gl

~, { ;

n

“’’’’w&w’””M

1’?

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Electric Slide-in Range If YOU Need Service Save time and money. Before you request serviceHelp US Help YOU Important Safety Instructions When You Get Your RangeAwarning Oven Page ‘! Important Safety Instructions CleaningSave These Instructions Installing LevelingFeatures of Your Range JSP38GS JSP39GR JSP40ASFeatures Index Anti-Tip Device See Selector SwitchFeatures Index Oven Vent Hot Cooktop Indicator Light Oven Controls, Clock & TimerFeatures of Your Oven Control Function INDICATORS. Lights up toOven CONTROL, Clock and Timer How to Set the Controls Coil Select Control Cooking Guide for Using Heat SettingsSurface Unit Controls Surface Cooking Tips JookwareDeep Fat Frying Wok CookingHome Canning Tips Observe Following Points in CanningCanning should be done on cooktop only Flat bottomed canners are recommendedJefore Using Your Oven Oven ShelvesUsing Your Oven Adjusting the Oven ThermostatTo Adjust the Temperature Shelf PositionsHow to Set Your Range for Baking How to Time BakeHow to Set Immediate Start and Automatic Stop BakingHow to Set Delay Start and Automatic Stop Quick ReminderPan Placement PreheatingBaking Pans Type of Food Shelf PositionBaking Guides CookiesPies CakesII~ For Frozen RoastsQuestions and Answers RoastingRoasting Guide Why are my meats not turning out as brown as they should? Use of Aluminum FoilLeave the door open to Broil stop position Should I salt the meat before broiling?Broiling Guide Oven door should be open to the broil stop positionEfore a Clean Cycle How to Set the Oven for CleaningOperating the SELF-CLEANING Oven After a Clean CycleHow to Delay Start of Cleaning Should there be any odor during the cleaning? Why do I have ash left in my oven after cleaning?My oven shelves do not slide easily. What is the matter? ~estions and AnswersCare and Cleaning Removal of Packaging TapeControl Knobs Control PanelEmovable Oven Door Inside of doorOutside of door Oven Light Bulb Removable Storage DrawerOven Vent Metal PartsLass Ceramic Cooktop Cleaning For heavy, burned on soilSpecial Care General Information‘ashe’%\.I m Anti-Tip DeviceProblem Problem Solver Problem Possible CauseHome Repair Service Individuals qualified to service their own appliancesEi!Es!a2-93 CG

JSP38GP, JSP38GS, JSP39GR, JSP40AS specifications

The GE JSP40AS, JSP39GR, JSP38GS, and JSP38GP are high-efficiency gas and electric water heaters designed to meet a variety of residential and commercial hot water needs. These models stand out due to their advanced technologies, energy-saving features, and innovative designs that prioritize user convenience and performance.

The JSP40AS model is a flagship in the lineup, featuring a 40-gallon tank capacity ideal for medium to large households. Its Energy Factor (EF) rating is impressive, indicating low energy consumption relative to the output. This model incorporates a durable stainless-steel burner, which is designed to provide consistent heating while minimizing energy usage. Additionally, the JSP40AS is equipped with a self-cleaning feature that helps reduce sediment buildup in the tank, enhancing longevity and efficiency.

Meanwhile, the JSP39GR model is geared toward efficiency without compromising performance. This unit employs advanced insulation technology to minimize heat loss, allowing hot water to be stored at optimal temperatures for longer periods. It also features an electronic ignition system that ensures reliable starts while using less gas compared to traditional pilot light systems. This model is well-suited for families seeking a balance between energy savings and hot water availability.

The JSP38GS offers a compact design, making it an excellent choice for homes with limited space. Despite its smaller size, it retains a high capacity and is built with advanced safety features, including a temperature and pressure relief valve. Its intelligent design also includes user-friendly controls, enabling homeowners to manage water temperature settings easily.

Lastly, the JSP38GP is specifically tailored for those looking for an eco-friendly hot water solution. This model not only meets strict energy efficiency standards but also comes with a high-performance heating element that optimizes energy use. Its digital display provides real-time feedback on performance, helping users monitor energy savings and operational efficiency.

In summary, the GE JSP series, including models JSP40AS, JSP39GR, JSP38GS, and JSP38GP, showcases a commitment to quality and efficiency. With features like advanced insulation, self-cleaning capabilities, and user-friendly controls, these water heaters are designed to meet modern households' diverse hot water demands while promoting sustainability and energy conservation. Whether for a large family or a compact space, GE offers reliable solutions tailored to meet various customer needs.
Top Page Image Contents