GE JSP39GR, JSP40AS, JSP38GS, JSP38GP warranty Problem

Page 33

,

PROBLEM

“F-” AND A NUMBER FLASH ON DISPLAY

COOKTOP FEELS HOT

SURFACE UNITS WILL NOT MAINTAIN A ROLLING BOIL OR FRYING RATE IS NOT FAST ENOUGH

FOODS COOK SLOWLY

SURFACE UNITS DO NOT WORK PROPERLY

TINY SCRATCHES (MAY APPEAR AS CRACKS) OR ABRASIONS ON RADIANT COOKTOP GLASS SURFACE

METAL MARKINGS (MAY APPEAR AS SCRATCHES)

DARK STREAKS OR SPECKS

AREAS OF

DISCOLORATION

ON COOKTOP

HOT SUGAR MIXTURES/ PLASTIC MELTED TO THE SURFACE

FREQUENT CYCLING OFF AND ON OF SURFACE UNITS

POSSIBLE CAUSE

●If the time display flashes “F-” and a number, you have a function error code. Press the CLEARIOFF pad. Allow oven to cool for 1 hour. If the failure code repeats, disconnect all power to the range. Call for service.

●Because the surface units heat by conduction, the cooktop surface may seem hotter than you are used to. This is normal. Make sure flat-bottom pans are used.

●Pans which are absolutely flat must be used.

●Pan bottoms should closely match the diameter of the cooking zone selected.

●Improper cookware being used. Pan bottoms should be flat, fairly heavy weight and the same diameter as the cooking zone selected.

●Difficulty may be in the main distribution panel of your house, caused by a blown oven-circuit fuse, a tripped oven-circuit breaker, the main fuse or the main circuit breaker depending on the nature of the power supply. If a circuit breaker is involved, reset it. If the control box uses fuses, the oven fuse (a cartridge-type) should be changed BUT ONLY BY SOMEONE FAMILIAR WITH ELECTRICAL CIRCUITS. If after doing 1 of these procedures the fuse blows or circuit breaker trips again, call for service.

NOTE: Apartment tenants or condominium owners should ask their building management to perform this check before calling for service.

●Cooktop surface unit controls are not properly set, or the wrong control knob is

set for the surface unit you are using.

-i

 

I

. Incorrect cleaning methods have been used, or coarse particles (salt or sand) are

 

between cookware and surface of cooktop, or the cookware with a rough bottom

 

has been used. Use recommended cleaning procedure, be sure cookware bottoms

 

are clean before use, and use cookware with smooth bottoms. Tiny scratches are

 

not removable but will become less visible in time as a result of cleaning.

 

 

 

●Do nots] ide aluminum cookware across the surface. Use recommended cleaning procedure to remove marks.

●Incorrect cleaning materials have been used, encrusted boilovers or grease spatters remain on the surface. Use a razor scraper and recommended cleaning procedure.

* Use a razor scraper and recommended cleaning procedure.

Q Mineral deposits from water or food can be removed with Cook Top Cleaning Creme.

“Turn the surface unit to LO, wipe the hot cooktop with several dry paper towels. Use a razor scraper held at a 30° angle to the cooktop to scrape the hot spill to a cool area outside the surface unit. Let the cooktop cool. Clean with Cook Top Cleaning Creme.

●Incorrect cookware used. Use only flat cookware to minimize cycling.

(continued next page)

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Electric Slide-in Range If YOU Need Service Save time and money. Before you request serviceHelp US Help YOU Important Safety Instructions When You Get Your RangeAwarning Oven Page ‘! Important Safety Instructions CleaningSave These Instructions Leveling InstallingJSP38GS JSP39GR JSP40AS Features of Your RangeSelector Switch Features Index Anti-Tip Device SeeFeatures Index Oven Vent Hot Cooktop Indicator Light Oven Controls, Clock & TimerFunction INDICATORS. Lights up to Features of Your Oven ControlOven CONTROL, Clock and Timer How to Set the Controls Coil Select Control Cooking Guide for Using Heat SettingsSurface Unit Controls Jookware Surface Cooking TipsDeep Fat Frying Wok CookingObserve Following Points in Canning Home Canning TipsCanning should be done on cooktop only Flat bottomed canners are recommendedOven Shelves Jefore Using Your OvenAdjusting the Oven Thermostat Using Your OvenTo Adjust the Temperature Shelf PositionsHow to Time Bake How to Set Your Range for BakingHow to Set Immediate Start and Automatic Stop BakingQuick Reminder How to Set Delay Start and Automatic StopPreheating Pan PlacementBaking Pans Type of Food Shelf PositionCookies Baking GuidesPies CakesFor Frozen Roasts II~Questions and Answers RoastingRoasting Guide Use of Aluminum Foil Why are my meats not turning out as brown as they should?Leave the door open to Broil stop position Should I salt the meat before broiling?Oven door should be open to the broil stop position Broiling GuideHow to Set the Oven for Cleaning Efore a Clean CycleOperating the SELF-CLEANING Oven After a Clean CycleHow to Delay Start of Cleaning Why do I have ash left in my oven after cleaning? Should there be any odor during the cleaning?My oven shelves do not slide easily. What is the matter? ~estions and AnswersRemoval of Packaging Tape Care and CleaningControl Knobs Control PanelEmovable Oven Door Inside of doorOutside of door Removable Storage Drawer Oven Light BulbOven Vent Metal PartsFor heavy, burned on soil Lass Ceramic Cooktop CleaningSpecial Care General InformationAnti-Tip Device ‘ashe’%\.I mProblem Problem Possible Cause Problem SolverIndividuals qualified to service their own appliances Home Repair ServiceEi!Es!a2-93 CG

JSP38GP, JSP38GS, JSP39GR, JSP40AS specifications

The GE JSP40AS, JSP39GR, JSP38GS, and JSP38GP are high-efficiency gas and electric water heaters designed to meet a variety of residential and commercial hot water needs. These models stand out due to their advanced technologies, energy-saving features, and innovative designs that prioritize user convenience and performance.

The JSP40AS model is a flagship in the lineup, featuring a 40-gallon tank capacity ideal for medium to large households. Its Energy Factor (EF) rating is impressive, indicating low energy consumption relative to the output. This model incorporates a durable stainless-steel burner, which is designed to provide consistent heating while minimizing energy usage. Additionally, the JSP40AS is equipped with a self-cleaning feature that helps reduce sediment buildup in the tank, enhancing longevity and efficiency.

Meanwhile, the JSP39GR model is geared toward efficiency without compromising performance. This unit employs advanced insulation technology to minimize heat loss, allowing hot water to be stored at optimal temperatures for longer periods. It also features an electronic ignition system that ensures reliable starts while using less gas compared to traditional pilot light systems. This model is well-suited for families seeking a balance between energy savings and hot water availability.

The JSP38GS offers a compact design, making it an excellent choice for homes with limited space. Despite its smaller size, it retains a high capacity and is built with advanced safety features, including a temperature and pressure relief valve. Its intelligent design also includes user-friendly controls, enabling homeowners to manage water temperature settings easily.

Lastly, the JSP38GP is specifically tailored for those looking for an eco-friendly hot water solution. This model not only meets strict energy efficiency standards but also comes with a high-performance heating element that optimizes energy use. Its digital display provides real-time feedback on performance, helping users monitor energy savings and operational efficiency.

In summary, the GE JSP series, including models JSP40AS, JSP39GR, JSP38GS, and JSP38GP, showcases a commitment to quality and efficiency. With features like advanced insulation, self-cleaning capabilities, and user-friendly controls, these water heaters are designed to meet modern households' diverse hot water demands while promoting sustainability and energy conservation. Whether for a large family or a compact space, GE offers reliable solutions tailored to meet various customer needs.
Top Page Image Contents