Using the self-cleaning oven, Before a Clean Cycle

Instructions

Using the self-cleaning oven.

Operating Instructions Safety

Wipe up heavy soil on the oven bottom.

Before a Clean Cycle

We recommend venting your kitchen with an open window or using a ventilation fan or hood during the first self-clean cycle.

Remove the racks, broiler pan, broiler grid, all cookware and any aluminum foil from the oven.

The oven racks can be self-cleaned, but they will darken, lose their luster and become hard to slide.

Soil on the front frame of the range and outside the gasket on the door will need to be cleaned by hand. Clean these areas with hot water, soap-filled steel wool pads or cleansers such as Soft Scrub®. Rinse well with clean water and dry.

Do not clean the gasket. The fiberglass material of the oven door gasket cannot withstand abrasion. It is essential for the gasket to remain intact. If you notice it becoming worn or frayed, replace it.

Wipe up any heavy spillovers on the oven bottom.

Make sure the oven light bulb cover is in place and the oven light is off.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any range. Move birds to another well- ventilated room.

Consumer Support Troubleshooting Tips Care and Cleaning

How to Set the Oven for Cleaning

Press the SELF CLEAN LO/STD pad once for a 4-hour clean time or twice for a 3-hour clean time.

A 3-hour self-clean time is recommended for use when cleaning small, contained spills. A self-clean time of 4 hours or longer is recommended for a dirtier oven.

If a time other than 4 hours or

3 hours is needed, use the number pads and enter the desired clean time.

You can change the clean time to any time between 3 hours and 5 hours, depending on how dirty your oven is.

Press the START pad.

The door locks automatically. The display will show the clean time remaining. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED light goes off.

When the LOCKED light goes off, you will be able to open the door.

■The word LOCKED will flash and the oven control will signal if you set the clean cycle and forget to close the oven door.

■To stop a clean cycle, press the

CLEAR/OFF pad. When the LOCKED light goes off indicating the oven has cooled below the locking temperature, you will be able to open the door.

JD900, JS900 specifications

The GE JS900 and JD900 are advanced gas turbine models from General Electric, designed for efficiency and performance in power generation. These turbines represent the innovative spirit of GE, incorporating cutting-edge technologies to meet the demands of modern energy markets.

The GE JS900 is a versatile model used primarily in combined cycle power plants. One of its standout features is its ability to achieve high thermal efficiency, reaching levels of around 60 percent. This efficiency translates into lower fuel consumption and reduced emissions, making it an environmentally friendly choice for energy producers. The JS900 utilizes a larger aerodynamic blade design and advanced cooling techniques, which enable it to operate at higher temperatures, thus enhancing its overall performance.

On the other hand, the GE JD900 is designed for industrial applications, particularly in the oil and gas sector. It boasts a robust construction that can withstand the harsh conditions typical within these environments. The JD900 features a unique combustion system that minimizes nitrogen oxide emissions while maintaining a high power output. Its modular design allows for easier maintenance and faster installation compared to other models, making it a preferred choice for operators looking for operational efficiency.

Both turbines are equipped with GE's Digital Wind Farm technology, which utilizes real-time data analysis to optimize performance and reliability. This technology allows operators to monitor and adjust settings dynamically, ensuring maximum efficiency and reducing downtime. Additionally, the JD900 and JS900 both feature advanced control systems that enable seamless integration with existing power plant operations.

Both models also emphasize flexibility in fuel options. They can operate on a variety of fuels, including natural gas, liquid fuels, and even biofuels, which adds to their adaptability in different geographical locations and energy markets.

In conclusion, the GE JS900 and JD900 turbines stand at the forefront of gas turbine technology, embodying efficiency, sustainability, and adaptability. Their advanced features, combined with GE's commitment to innovation, make them ideal choices for a variety of energy applications, meeting the needs of industries while promoting environmental responsibility.