GE JD900, JS900 Cleaning the glass cooktop, Tips Consumer Support, Operating Instructions Care

Page 25

Cleaning the glass cooktop.

ge.com

Control Lockout (on some models)

Begin by locking the cooktop; see the

Control Lockout section.

Normal Daily Use Cleaning

Safety Instructions

Clean your cooktop after each spill. Use CERAMA BRYTE® Ceramic Cooktop Cleaner.

ONLY use CERAMA BRYTE® Ceramic Cooktop Cleaner on the glass cooktop. Other creams may not be as effective.

To maintain and protect the surface of your glass cooktop, follow these steps:

Before using the cooktop for the first time, clean it with CERAMA BRYTE® Ceramic Cooktop Cleaner. This helps protect the top and makes cleanup easier.

Daily use of CERAMA BRYTE® Ceramic Cooktop Cleaner will help keep the cooktop looking new.

Shake the cleaning cream well. Apply a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner directly to the cooktop.

Use a paper towel or CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops to clean the entire cooktop surface.

Use a dry cloth or paper towel to remove all cleaning residue. No need to rinse.

NOTE: It is very important that you DO NOT heat the cooktop until it has been cleaned thoroughly.

Operating Instructions Care

Use a CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops.

Burned-On Residue

WARNING: DAMAGE to your glass surface may occur if you use scrub pads other than the pad included with your cooktop.

Allow the cooktop to cool.

Spread a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner on the entire burned residue area.

Using a CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops, rub the residue area, applying pressure as needed.

If any residue remains, repeat the steps listed above as needed.

For additional protection, after all residue has been removed, polish the entire surface with CERAMA BRYTE® Ceramic Cooktop Cleaner and a paper towel.

and Cleaning Troubleshooting

The CERAMA BRYTE® Ceramic Cooktop Scraper and all recommended supplies are available through our Parts Center. See instructions under “To Order Parts” section on next page.

NOTE: Do not use a dull or nicked blade.

Heavy, Burned-On Residue

Allow the cooktop to cool.

Use a single-edge razor blade scraper at approximately a 45° angle against the glass surface and scrape the soil. It will be necessary to apply pressure to the razor scraper in order to remove the residue.

After scraping with the razor scraper, spread a few drops of CERAMA BRYTE® Ceramic Cooktop Cleaner on the entire burned residue area. Use a CERAMA BRYTE® Cleaning Pad to remove any remaining residue.

For additional protection, after all residue has been removed, polish the entire surface with CERAMA BRYTE® Ceramic Cooktop Cleaner and a paper towel.

25

Tips Consumer Support

Page 24 Page 26
Image 25
Page 24 Page 26
Contents 49-80373 11-05 JR Model # Serial #All ranges can tip and injury could result Consumer SupportGe.com SupportRadiant Surface Units Troubleshooting Tips CleaningOperating Instructions Care Consumer Support Troubleshooting Tips Care and Cleaning Using the surface unitsHow to Set InstructionsCleaning Troubleshooting Tips Consumer Support Safety InstructionsTemperature Limiter About the radiant surface units…Selecting types of cookware Using a pressure canner SafetyObserve the Following Points in Canning Oven Control, Clock and Timer Features and Settings Using the oven controlsSafety Using the ovenInstructions Operating Broiling Guide How to Set the Oven for BroilingBroiling Guide For HI BroilTips Consumer Support Using the clock, timer and control lockoutHow to Set an Immediate Start and Automatic Stop Support Troubleshooting Tips CareHow to Set a Delayed Start and Automatic Stop Cleaning Troubleshooting Tips Consumer Support Adjust the oven thermostat-Do it yourselfSafety Instructions To Adjust the ThermostatBefore a Clean Cycle Using the self-cleaning ovenHow to Delay the Start of Cleaning After a Clean CycleCare and Cleaning Special features of your oven controlConsumer Support Troubleshooting Tips Fahrenheit or Celsius Temperature SelectionCook and Hold Care and Cleaning Troubleshooting Tips Consumer SupportHour, 24-Hour or Clock Blackout Start padHow to Set for Regular Baking/Roasting Using the Sabbath Feature on some modelsConsumer Support How to Remove Protective Shipping Film and Packaging Tape Care and cleaning of the rangeControl Knobs Oven VentConsumer Support Troubleshooting Tips Care Instructions Safety InstructionsStorage Drawer Removal on some models Oven RacksBroiler Pan and Grid To remove the drawerOven Heating Elements Oven Light ReplacementTo remove the cover To replace the coverTips Consumer Support Cleaning the glass cooktopOperating Instructions Care Metal Marks and Scratches Operating Instructions SafetyDamage from Sugary Spills and Melted Plastic To Order PartsBefore you call for service… Not work Clock and timer doOven light does Food does notDuring a clean cycle See the Using the self-cleaning oven sectionOpen after a Clean cycle Oven not clean after Crackling orDisplay goes blank Power outageDisplay flashes Unable to getCare and Cleaning Looking For Something More? AccessoriesWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Safety Instructions Operating GE Electric Range WarrantyTroubleshooting Tips Consumer Support Instructions Care and CleaningParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio

JD900, JS900 specifications

The GE JS900 and JD900 are advanced gas turbine models from General Electric, designed for efficiency and performance in power generation. These turbines represent the innovative spirit of GE, incorporating cutting-edge technologies to meet the demands of modern energy markets.

The GE JS900 is a versatile model used primarily in combined cycle power plants. One of its standout features is its ability to achieve high thermal efficiency, reaching levels of around 60 percent. This efficiency translates into lower fuel consumption and reduced emissions, making it an environmentally friendly choice for energy producers. The JS900 utilizes a larger aerodynamic blade design and advanced cooling techniques, which enable it to operate at higher temperatures, thus enhancing its overall performance.

On the other hand, the GE JD900 is designed for industrial applications, particularly in the oil and gas sector. It boasts a robust construction that can withstand the harsh conditions typical within these environments. The JD900 features a unique combustion system that minimizes nitrogen oxide emissions while maintaining a high power output. Its modular design allows for easier maintenance and faster installation compared to other models, making it a preferred choice for operators looking for operational efficiency.

Both turbines are equipped with GE's Digital Wind Farm technology, which utilizes real-time data analysis to optimize performance and reliability. This technology allows operators to monitor and adjust settings dynamically, ensuring maximum efficiency and reducing downtime. Additionally, the JD900 and JS900 both feature advanced control systems that enable seamless integration with existing power plant operations.

Both models also emphasize flexibility in fuel options. They can operate on a variety of fuels, including natural gas, liquid fuels, and even biofuels, which adds to their adaptability in different geographical locations and energy markets.

In conclusion, the GE JS900 and JD900 turbines stand at the forefront of gas turbine technology, embodying efficiency, sustainability, and adaptability. Their advanced features, combined with GE's commitment to innovation, make them ideal choices for a variety of energy applications, meeting the needs of industries while promoting environmental responsibility.
Top Page Image Contents