GE JBW3-4 warranty Glass Cooktop Cleaning

Page 15

GLASS COOKTOP CLEANING

(on some models)

Glass Cooktop Cleaning

Cleaning of glass cooktops is different from cleaning a standard porcelain finish. To maintain and protect the surface of your new glass cooktop follow these basic steps.

Before you use the cooktop for the first time, clean it with Cook Top Cleaning Creme. This helps protect the top and makes clean-up easier.

DAILY CLEANING: Use only Cook Top Cleaning Creme on the glass cooktop.

For normal, light soil:

1.Rub a few drops (less is better) of Cook Top Cleaning Creme onto soiled area using a damp paper towel. Buff with a dry paper towel until all soil and creme are removed. Frequent cleaning leaves a protective coating which is essential in preventing scratches and abrasions.

2.Clean surface with Cook Top Cleaning Creme after each use.

For heavy, burned on soil:

1.Apply a few drops of Cook Top Cleaning Creme to the (cool) soiled area.

2.Using a damp paper towel, rub creme into the burned on area. As with any burned on spill, this may require some effort.

3.Carefully scrape soil with razor scraper. Hold scraper at a 30° angle against the glass cooktop.

4.If any soil remains, repeat the steps listed above. For additional protection, after all soil has been removed, polish the entire surface with the Cook Top Cleaning Creme.

5.Buff with a dry paper towel.

NOTE:

. Using a razor scraper will not damage the surface if the 30° angle is maintained.

Be sure to use a new, sharp razor scraper. Do not use a dull or nicked blade.

. Store the razor scraper out of reach of children.

SPECIAL CARE: Sugary spillovers (such as jellies, fudge, candy syrups) or melted plastics can cause pitting of the surface of your cooktop (not covered by the warranty) unless the spill is removed while still hot. Special care should be taken when removing hot substances. Follow these instructions carefully and remove soil while spill is still hot.

1. Turn off all surface units affected by the spillover.

Remove hot pans.

 

2. Wearing an oven mitt, hold the

~ .,,$.”;;’)~ : -

razor scraper at a 30° angle to the

.., )

cooktop and scrape hot spill to a : “’ ‘“ ,

cool area outside the surface unit.

/

 

9

3.With the spill in a cool area, use a dry paper to”wel to remove any excess. Any spillover remaining should be left until the surface of the cooktop has cooled.

Do not continue to use the soiled surface unit until all of the spillover has been removed. Follow the steps under Heavy Soil to continue the cleaning process.

COOKTOP SEAL: To clean the cooktop seal, let a wet cloth rest on it for a few minutes, then wipe clean. Use a mild detergent if needed. Do not use a knife or any sharp object on the seal because it will cut or damage it.

GENERAL INFORMATION: As the Cook Top Cleaning Creme cleans, it leaves a protective coating on the cooktop surface. This coating helps to prevent build-up of mineral deposits (water spots) and will make future cleaning easier. Dishwashing detergents remove this protective coating and therefore make the cooktop more susceptible to staining.

To conveniently order more creme and/or scrapers for cleaning your glass cooktop, please call our toll

free number:

800-626-2002

National Parts Center

Creme 10 oz.

# WB02X8273

Scraper

# WX5X1614

Creme and scraper kit

# WB64X5027

PRECAUTIONS

Most cleaners contain ammonia, chemicals and abrasives which can damage the surface of your cooktop. Use only the Cook Top Cleaning Creme for proper cleaning and protection of your glass cooktop.

If you slide aluminum or copper cookware across the surface of your cooktop, they may leave metal markings which appear as scratches. If this should happen, use the razor scraper and Cleaning Creme to remove these markings. Failure to remove these residues immediately may leave permanent marks.

Water stains (mineral deposits) are removable

using Cook Top Cleaning Creme or full strength white vinegar.

If pots with a thin overlay of aluminum, copper or enamel are allowed to boil dry, the overlay may bond with the glass cooktop and leave a black discoloration. This should be removed immediately before heating again or the discoloration maybe permanent.

. Use of window cleaner may leave an iridescent film on the cooktop. Cook Top Cleaning Creme will remove this discoloration.

Read and follow all instructions and warnings on Cook Top Cleaning Creme labels.

I

15

Image 15
Contents EEEEl~ Write down the model and serial numbers If YOU Need ServiceSave time and money. Before you request service Help US Help YOUAwarning Important Safety InstructionsOven Surface Cooking UnitsOflly ~e~ain types of glass glasticeramk Radiant Surface Units Save These INSTRUCTIONS5Features of Your Range JBS17 JBC17 JBS16 JBS18 JBS30 JBS03 JBS03-4 JBS07Radiant HOW does this Cooktop Compare To Your OLD ONE?General Information About Radiant Surface Units Home Canning Tips Observe the Following Points in CanningGlass Cooktop Cautions How to Set the Controls Cooking Guide for Using Heat SettingsSpecial Notes for Glass Cooktops Cookware Hot Surface Indicator Light Glass Cooktops OnlySurface Controls Surface Cookware Tips~pes of Cookware Wok CookingHow to Check Pan Performance Glass Cooktop Cleaning Glass Cooktop CleaningClock Shelf Positions Before Using Your OvenOven Controls Oven ShelvesHow to Set Your Range for Baking BakingPreheating Cookies Pan PlacementBaking Pans Baking GuidesRoasting Adjust the Oven ThermostatRoasting Guide Use of Aluminum FoilFrozen Roasts Questions & Answers BroilingOven door should be open to the broil stop position Care and Cleaning To remove a surface unit Surface Units and Drip Pans Electric Coil ModelsPorcelain Enamel Cooktop Electric Coil Models To replace a surface unitOven Light Replacement on some models Broiler Pan and Grid on some modelsOven Heating Elements Outside of door If necessary, you may use an oven cleanerLift-Off Oven Door Porcelain Oven InteriorTo Clean the Continuous-Cleaning Oven Continuous-cleaning Oven Interior on some modelsGlass Window on some models and Glass Surfaces Control Panel and KnobsPainted Surfaces Metal PartsNXE This appliance must be properly grounded Installation InstructionsFlooring Under the Range Step Prepare for Electrical ConnectionStep Wire Power Cord Installation Installation InstructionsLhcOND’T Step Final Check QUESTIONS? USE this Problem Solver 131ectric Coil ModelsGlass Cooktop Models Work Properly Problem SolverV2 w Page Wdll Be There Warranty