Sherwood R-765 manual Memorizing the adjusted channel levels

2	Adjust the level of the selected channel
	as desired.	• The LFE level can be adjusted within the range of
		-10~0 dB and other channel levels within the range
		of -15~+15 dB.
	ADJUST	• In general, we recommend the LFE level to be
	CH/LEVEL	adjusted to 0 dB.(However, the recommended LFE
	T/V	level for some early DTS software is -10 dB.) If the
	or
		recommended levels seem too high, lower the setting
		as necessary.
		• If the channel display disappears, start from the step
		1 again.
3	Repeat the above steps 1 and 2 to adjust each channel level.

Memorizing the adjusted channel levels

This unit gives two spaces(“REF.1” and “REF.2”) for memory of the adjusted channel levels. You can call the memorized again whenever you want.

1 After doing the above steps 1~3 in “Adjusting the current channel level”, press the below button.

MEMO/ENTER

ENTER

or

• ”REF. 1” is displayed and “1” flickers.

2	Select the desired space between REF. 1 and	3	Press below button.
	REF. 2.
		MEMO/ENTER
ADJUST			ENTER
			or
	CH/LEVEL
	T/V
	or
		• The adjusted channel levels have now been
		memorized.

30