![](/images/new-backgrounds/1090432/9043295x1.webp)
Safety Instructions |
| Operating | Instructions |
|
| |
| Care and Cleaning | |
|
|
|
| Installation | Instructions |
|
| |
| Troubleshooting Tips | |
| Consumer Support | |
|
|
|
Before you call for service…
Troubleshooting Tips
Problem |
| Possible Causes | What To Do | |
|
|
|
|
|
Excessive smoking |
| Excessive soil. | • On models with touch pads, touch the Clear/Off pad. | |
|
|
|
| On models with an OVEN TEMP knob, turn it to OFF. |
|
|
|
| Open the windows to rid the room of smoke. Wait until |
|
|
|
| the SELF CLEAN light goes off. Wipe up the excess soil |
|
|
|
| and reset the clean cycle. |
|
|
|
|
|
Oven door will not open |
| Oven too hot. | • Allow the oven to cool below locking temperature. | |
after a clean cycle |
|
|
|
|
|
|
|
|
|
Oven not clean after |
| Oven controls not properly set. | • See the Using the | |
a clean cycle |
|
|
|
|
| Oven was heavily soiled. | • Clean up heavy spillovers before starting the clean cycle. | ||
|
| |||
|
|
|
| Heavily soiled ovens may need to |
|
|
|
| a longer period of time. |
|
|
|
|
|
Oven door will not |
| Oven is too hot. | • Allow the oven to cool below locking temperature. | |
unlock (on models |
|
|
| Do not lock the door with the door latch except when |
with a door latch) |
|
|
| using the |
|
|
|
|
|
Self clean light (on |
|
| The OVEN TEMP knob has not | •Set the OVEN TEMP knob to CLEAN. See the Using the |
some models) blinks |
|
| been set to CLEAN when the | |
when trying to set a |
|
| latch was moved to the right. |
|
self clean cycle |
|
|
|
|
|
|
|
| |
|
|
| The latch was not moved to the •Move the latch to the right as far as it will go. See the | |
|
|
| right when the OVEN TEMP knob | Using the |
|
|
| was set to CLEAN. |
|
|
|
|
|
|
Self clean light (on |
|
| A power interruption occurred. | •Turn the OVEN TEMP knob to OFF and move the latch |
some models) blinks |
|
|
| to the left as far as it will go. Reset the range controls |
during self clean cycle |
|
|
| to the desired settings. See the Using the |
|
|
|
| oven section. |
|
|
|
|
|
“Door” appears in the |
|
| •Move the latch handle all the way to the right. | |
display (on some models) |
|
| selected but the latch handle |
|
|
|
| was not moved all the way |
|
|
|
| to the right. |
|
|
| Latch handle was moved to the | • Move the latch handle to the right only when setting | |
|
| right but a program other than | the | |
|
|
| ||
|
|
|
| |
|
| On models with a door latch, | • The latch may have been moved, even if only slightly, | |
letter” flash in the display |
| if a function error code appears | from the locked position. Make sure the latch is moved | |
(on some models) |
| during the | to the right as far as it will go. | |
|
| check the oven door latch. |
| |
|
|
|
| |
|
| You have a function error code. | • Touch the Clear/Off pad. Allow the oven to cool for | |
|
|
|
| one hour. Put the oven back into operation. |
|
|
|
| |
|
| If the function code repeats. | • Disconnect all power to the range for 5 minutes | |
|
|
|
| and then reconnect power. If the function error |
|
|
|
| code repeats, call for service. |
48