Maytag W10252706B installation instructions Anti-Tip Bracket Template, Top edge Left edge

Page 15

ANTI-TIP BRACKET TEMPLATE

Cut on dotted lines and place the left edge against the left side cabinet and the top edge against the rear wall.

Top edge

Left edge

Image 15

Contents W10252706B INSTALLATION INSTRUCTIONS 30 76 CM FREESTANDING ELECTRIC RANGESTable of Contents RANGE SAFETY Your safety and the safety of others are very importantDANGER Location Requirements INSTALLATION REQUIREMENTSMobile Home - Additional Installation Requirements Tools and PartsA C B D E Product DimensionsCabinet Dimensions Electrical Requirements - U.S.A. OnlyIf connecting to a 4-wire system If connecting to a 3-wire systemElectrical Connection A D C B INSTALLATION INSTRUCTIONSInstall Anti-Tip Bracket Unpack RangePower Supply Cord Direct WireElectrical Connection - U.S.A. Only connecting to 4-wire connection Power Supply CordStyle 1 Power supply cord strain relief Style 2 Direct wire strain reliefD. Neutral white wire 3-wire connection Power Supply CordA B C D E. Neutral center wireA B CDE Direct Wire Installation Copper or Aluminum Wire4-wire Connection Direct Wire Bare Wire Torque SpecificationsE. Neutral white wire 3-wire connection Direct WireA B CD E D. Bare green ground wireTo Remove Verify Anti-Tip Bracket LocationLevel Range Storage DrawerTo Replace Complete InstallationFor power supply cord-connected ranges For direct-wired rangesMoving the Range Top edge Left edge ANTI-TIP BRACKET TEMPLATEAll rights reserved W10252706B2009 9/09