Bosch Appliances HGS7052UC manual Clock, Control knob to change the time of day or, Timer

Getting Started

Table 2: Oven Control Panel

Clock– Shows the time of day with a 12 or 24 hour option.		Off - Press pad to turn off oven and/or warming drawer.
Also displays the timer and times associated with delayed		Oven Temperature - Shows the oven temperature.
cooking and cleaning modes. Turn the control knob to tog-
		Preheat Temperature - Displays temperature of oven dur-
gle between timer and clock display. Press Time and turn
the control knob to change the time of day or the		ing preheat mode.
timer.		Probe Indicator (some models) - Indicates that the probe
Cooking Mode - Press pad to display cooking mode.		is properly inserted into the probe receptacle in the oven.
Cooking Mode Icon – Shows the cooking burners that		Start - Press pad to complete an entry.
are active for the mode that is selected. The icon will also		Temperature - Press pad to select cooking temperature.
display a fan if the convection fan is utilized in the selected
		Time - Press pad to set or change the time of day or the
mode.
Control Knob - Used to set the clock, timers, select cook-		timer.
		Timer – There are two timers - TIMER 1 AND TIMER 2;
ing mode and temperature. Turn clockwise to increase and
turn counterclockwise to decrease.		Each counts down the time in hours and minutes. With
Light - Press pad to turn oven light on or off.		less than 60 minutes remaining, the timer also displays
		seconds. Press Time to access the timers.
Door Locking Indicator - Icon is displayed during the
		Warming Drawer Indicator - Indicates that the warming
self-clean mode when the door is locked. DO NOT attempt
		drawer (some models) is on. Also displays the warming
to open the door until the lock symbol is no longer present.
		drawer setting.
	You control the operation of the range by using the touch pads, dial and control
	knobs.
	The touchpads, in conjunction with the dial, are used to select an oven mode, set
	the oven temperature, set the time(s) and to set up your range. To use the touch-
	pad, press the center part of the pad with the flat part of your fingertip. A beep will
	sound to indicate that the selection has been made. Turn the dial to the desired
	setting and press start.
	The knobs are used to control the heat level of the burners. Push down and turn
	to the symbol to light and then to the desired heat setting.
	See the sections on Using the Cooktop, Using the Oven and Using the Warming
	Drawer for detailed instructions.
The Clock
About the Clock	• Always set the clock after installation or after a power failure. Once power
	returns to the oven, the clock defaults to 12:00 am.
	• The time of day is displayed in hours and minutes.
	• The clock time will appear during all oven operations except when the timer is
	running.
	• The oven is preset to a 12 hour clock and indicates AM and PM. To switch to
	a 24 hour clock, see "Select Function” section.
	• If you do not complete the operation of setting the clock, the oven will beep
	periodically as a reminder to set the clock time. Press OFF to stop the beep-
	ing.

Setting the Clock	1. CLOCK will be displayed and the hour digits	12:	00 AM
	will flash. Turn knob to select hour and AM or			CLOCK
	PM.

2.Press Time. CLOCK will still be displayed and the minute digits will flash.

3.Turn knob. Set minutes.

English 12