Installation of Flue Riser and Shelf Assembly

ULTIMATE RESTAURANT RANGES

INSTALLATION

STEP 3: ATTACH FLUE RISER AND SHELF ASSEMBLY

Place the flue riser assembly on the range as shown on the appropriate diagram below.

1.Slide the flue riser assembly over the bayonets until it bottoms out, as shown below.

2.Secure ends of flue riser assembly with two (2) 1/4-20 x 3/4 hex head bolts, flat washers and lockwashers.

3.Attach the shelf assembly (if ordered) to the flue riser assembly with 1/4-20 x 3/4 hex head bolts, flat washers and lockwashers.

Figure 6

Installation of Flue Riser and Shelf Assembly

Single-Oven Models	Dual-Oven Models

STEP 4: ELECTRICAL CONNECTION

Wiring diagrams are located on the rear of the range. Be sure that the input voltage and phase match the requirements shown on the serial plate (see Figure 1 on page 3).

Ranges are factory-equipped either with a power cord or with one or two two-pole terminal blocks (one for each oven), located behind cover plate(s) located on the rear of the range. To connect the supply wires, remove the appropriate cover plate. Route the supply wires and the grounding wire through the strain relief fitting to the terminal block. Insert the supply wires, one each, into the two poles of the terminal block and tighten the screws. Insert the ground wire into the grounding lug and tighten the screw. Re-attach the cover plate.

Three phase ranges are wired as above, using only two supply wires. The third wire is not used and must be properly terminated.

All ranges are shipped wired as specified by factory order. Conversion between single-phase and three-phase can be accomplished by referring to phase loading and line amperes chart on wiring diagram for wire size and ampere requirements.

STEP 5: GAS CONNECTION

If this equipment is being installed at over 610 meters altitude and that information was not specified when ordered, contact the appropriate authorized Southbend Service Representative or the Southbend Service Department. Failure to install with proper orifice sizing will result in poor performance and may void the warranty.

OWNER’S MANUAL 1190820 REV 3 (11/10)

PAGE 19 OF 48

4365A, 4601DD-2RR specifications

The Southbend 4601DD-2RR and 4365A are advanced commercial cooking appliances designed to deliver exceptional performance, efficiency, and reliability in professional kitchens. Recognized for their robust engineering and user-friendly features, these models are ideal for a variety of cooking environments, from bustling restaurants to catering services.

The Southbend 4601DD-2RR is a double-stacked convection oven that offers a generous cooking capacity, allowing chefs to prepare large volumes of food simultaneously. Its innovative design features two independent oven compartments, each equipped with powerful fan-assisted convection heating that ensures even cooking and consistent results. The unit operates with a temperature range of 200°F to 500°F, providing versatility for various cooking techniques, including roasting, baking, and toasting. The built-in digital controls allow for precise temperature management and easy programming, further enhancing the user experience.

Meanwhile, the Southbend 4365A is a high-performance countertop griddle that boasts an impressive cooking surface area. Its heavy-duty, stainless steel construction guarantees longevity and easy maintenance. The griddle features a smooth cooking surface that provides even heat distribution, making it perfect for breakfast items like pancakes and eggs or lunch favorites like burgers and sandwiches. With a temperature control knob for adjustable heat levels, chefs can achieve perfectly cooked items tailored to their specifications.

Both models incorporate advanced safety features, such as automatic shut-off systems and heat-resistant handles, ensuring a secure working environment in the busy kitchen. Energy efficiency is another highlight, with both models designed to minimize energy consumption while delivering maximum output. This focus on sustainability not only reduces operational costs but also lessens the environmental impact.

Additionally, the Southbend 4601DD-2RR and 4365A come equipped with thorough insulation, which helps maintain optimal cooking temperatures while preventing surface heat buildup. This is critical for ensuring safety and efficiency in food preparation.

In summary, the Southbend 4601DD-2RR and 4365A are exemplary showcases of modern culinary technology, combining robust construction with user-centric design, making them invaluable assets for any kitchen aiming for excellence. Their reliability, performance capabilities, and safety features position them as leaders in the commercial cooking equipment market.