Sunfire X Series operation manual Installation, Siting, Appliances Equipped With Casters

Page 6

INSTALLATION

This product has been certified as commercial cooking equipment and must be installed by professional personal as specified.. THIS APPLIANCE IS NOT RECOMMENDED FOR RESIDENTIAL INSTALLATION..

We suggest installation, maintenance and repairs should be preformed by your local Garland/US Range authorized service agency..

Siting

The floor on which the appliance is to be sited must be capable of adequately supporting the weight of the appliance and any ancillary equipment.. Units with ovens must be fitted with legs if installed on a combustible floor.. Adequate clearance must be provided for servicing and proper operation..

Appliances Equipped With Casters

1. The installation shall be made with a connector that

complies with the Standard for Connectors for Moveable

Gas Appliances, ANSI Z21..69/CSA 6..16, Addenda Z21..69B-

2006/CSA 6..16B-2006 (or latest edition), and a quick-

disconnect device that complies with the Standard for

Quick Disconnects for Use with Gas Fuel, ANSI Z21..41/

3.Once legs have been attached and secured they can be adjusted to level the appliance and compensate for uneven flooring..

Installing Shelf To Backguard

Note: Shelf may be installed before or after installing the backguard to the range..

1.Loosen 4 bolts on the front of the backguard approximately 1/4” (6mm)..

2.Align the 4 slotted holes on the back of the shelf with the 4 bolts on the backguard..

3.Slide the shelf downward until the 4 bolts are engaged in the slotted portion of the keyhole..

4.Tighten the 4 bolts to secure the shelf..

5.On 60” units only, install a sheet metal screw though the hole in the underside of the shelf into the backguard and tighten..

 

CSA 6..9, Addenda Z21..41A-2005/CSA 6..16A-2005 (or

 

latest edition)..

2.

The front casters of the appliance are equipped with

 

brakes to limit the movement of the appliance without

 

placing any strain on the connector or quick disconnect

 

device or its associated piping..

3.

Please be aware; required restraint is attached to a

 

bracket, (which is located on the rear of the caster closest

 

to the gas connection), and if disconnection of the

MOUNTING BOLTS

BACKGUARD

SHELF

SHEETMETAL

SCREW

restraint is necessary, be sure to reconnect the device

after the appliance has been returned to its original

position..

Appliances Equipped With Legs

1.Raise the front of the appliance and block.. Do not lay the appliance on its back..

2.Legs are threaded to be easily screwed into the holes provided on the bottom of the range..

Backguard With High Shelf, Salamander Or Cheesemelters Mounting Instructions

1.Rear of the range must be easily accessible..

2.Place the backguard, high shelf, salamander, or cheesmelter on the rear of the range, slipping the support brackets into the openings in the main body sides..

Page

Part # 4523343 Rev 1 (02/12/08)

Image 6
Contents All 24, 36, & 60-inch wide models PáginaRev 1 02/12/08 Important Information Keep appliance area free and clear of combustiblesTable of Contents Gas Pressures Dimensions and SpecificationsClearances Gas Inlet SizeBase Model Designations & Total Input Rates Dimensions and SpecificationsIntroduction Rating PlateSiting InstallationInstalling Shelf To Backguard Appliances Equipped With CastersVentilation Air InstallationInstallation Notes Statutory RegulationsTesting and Adjustment TestingFinal Preparation Ovens Standard OperationOpen Top burners Hot Top SectionsOperation Product Application InformationCast Iron top Grates Maintenance and CleaningSeasoning Griddle Stainless SteelMaintenance and Cleaning Cast Iron Top & GratesHot Tops Rev 1 02/12/08 Tous des 24, 36, et 60 pouce les modèles larges Pièce nº 4523343 Rev 1 02/12/08Informations Importantes AvertissementTable DES Matières Essais ET RéglagesDES Produits Pressions Du Gaz Dimensions ET SpécificationsDégagements Débits Calorifiques Des Brûleurs IndividuelsDimensions ET Spécifications suite Plaque SignalétiqueModèle nº Description Appareils Équipés De Roulettes Installation De L’étagère Sur Le DosseretImplantation Appareils Équipés De PiedsAir De Ventilation Installation suiteInstructions Avant Installation Réglementation LégaleEssais ET Réglages Préparation FinaleEssais Brûleurs De Plaque Ouverte Grils Commandés Par RobinetUtilisation Fours standardArrêt De La Cuisinière Utilisation suiteGril/Rôtissoire Tourner tous les robinets en position d’arrêt « OFF »Informations D’APPLICATION DES Produits GénéralitésGrilles Supérieures En Fontes Entretien ET NettoyageApprêtage Gril Acier InoxydableEntretien ET Nettoyage suite Plaques Et Grilles En FontePlaques De Cuisson Todos LOS Modelos DE 24, 36 Y 60 Pulgada 02/12/08Información Importante AdvertenciaÍndice IntroducciónInstalación Tamaño De La Admisión De Gas Dimensiones Y EspecificacionesPresiones De Gas Caudal De Entrada a Los Quemadores IndividualePlaca De Características Dimensiones Y Especificaciones continuaciónIntroducción Modelo # Descripción GasArtefactos Equipados Con Ruedas Locas InstalaciónEmplazamiento Artefactos Equipados Con PatasRegulaciones Estatutarias Instalación continuaciónVentilación Y Suministro De Aire Conexión De GasPreparación Final Conexiones eléctricas donde apliqueNotas De Instalación Modelos de hornos de convección con 220/240 voltiosPruebas Y Ajustes PruebasHornos Convencionales OperaciónHornillas Secciones De Planchas De Calor Uniforme Hot TopsPlancha/Parrilla Del Horno Operación continuaciónPlanchas Controladas Mediante Las Válvulas Apagado De La EstufaInformación Sobre Aplicaciones DEL Producto Rejillas De Hierro Colado De Las Hornillas Mantenimiento Y LimpiezaCurado Plancha Acero InoxidableMantenimiento Y Limpieza continuación Interior Del Horno Esmalte De PorcelanaParte Superior Y Rejillas De Hierro Colado Planchas De Calor Uniforme Hot TopRev 1 02/12/08

X Series specifications

The Sunfire X Series is a remarkable line of high-performance audio speakers known for their innovative design and cutting-edge technology. Engineered for audiophiles and music enthusiasts, the X Series delivers an extraordinary audio experience that captivates listeners with its remarkable sound quality and precision.

At the heart of the Sunfire X Series is its patented "Subwoofer" technology, which employs a unique design to produce deep, powerful bass while maintaining clarity across all frequencies. The series incorporates the renowned Sunfire "Compression Technology," allowing for greater output with less distortion. This innovative approach ensures that low-end frequencies are not just felt but experienced in a way that adds depth to every note.

The X Series is equipped with advanced speakers featuring a high-efficiency design that amplifies audio output while minimizing power consumption. This efficiency allows the speakers to deliver rich, full-range sound even in larger spaces, making them perfect for both home theaters and music listening environments. The speakers are also designed to work seamlessly with various audio formats, ensuring compatibility with modern audio systems, including surround sound setups.

One standout feature of the Sunfire X Series is its robust cabinet construction. The use of high-density fiberboard and strategically placed internal bracing minimizes cabinet resonance, reducing unwanted noise and allowing pure sound reproduction. The aesthetically pleasing design is equally functional, allowing for easy integration into any room decor while providing a professional look that complements high-end audio systems.

Additionally, the Sunfire X Series incorporates advanced connectivity options, including wireless capabilities. This allows users to stream high-definition audio directly to the speakers from compatible devices without the clutter of wires. Bluetooth and Wi-Fi connectivity options enhance user convenience, enabling music playback from smartphones, tablets, and computers.

Furthermore, the speakers in the X Series are designed to accommodate various user settings, featuring customizable EQ settings that allow users to tailor the audio output to their personal preferences and room acoustics. This level of adaptability ensures that every listening environment is optimized for the best sound experience.

In summary, the Sunfire X Series exemplifies a commitment to quality and innovation, combining powerful performance with elegant design. Its advanced technologies, including Compression Technology, efficient speaker design, durable construction, and versatile connectivity options, make it a top choice for discerning audio enthusiasts seeking a premium listening experience. Whether for home theater systems or music playback, the Sunfire X Series is designed to impress and deliver immersive soundscapes that bring every note to life.