AEG 3007VNM-M manual Drop Down Grilling Element, Removing oven door pull down door models only

Page 20

Drop Down Grilling Element

The removal of a single screw at the front of the upper grill element allows the grill to drop down to facilitate the cleaning of the oven ceiling. On completion of cleaning, simply replace the grill element and secure with the screw.

To avoid smoking, use a clean, damp cloth to regularly clean oil and fat splatters from the exposed drop down grilling element.

The fan cover can be lifted out for cleaning separately by removing the retaining screws. The fan blade can also be removed for cleaning if necessary.

NOTE: that the fan blade nut has a left-handed thread.

Removing oven door (pull down door models only)

The oven door can be easily removed for better access while cleaning. To remove the oven door:

1.Open the door fully and fit the supplied pin in the hole.

2.Raise the door slightly, holding the sides of the door about half way up. Make sure the pin stays in the hole the whole time. Lift the door gently. This should disconnect the hinges from the oven frame.

3.Remove the door by continuing to raise it while pulling the door away from the oven. When handling the door be careful not to dislodge the pin off the hole. If the pin does dislodge, the hinge will have to be closed by hand and the pin re-fitted onto the hole before re-fitting into the oven.

To re-fit the oven door:

i.Holding the door at an angle to the oven, slide the hinges into the oven frame, making sure that on each side the top curved arm fits into the top slot and the lower arm fits into the bottom slot.

ii.Make sure the hinges are pushed as far as they will go and the lower arm engages into the plate mounted in the oven frame.

iii.Open the door fully and ensure the pin fully disengages from the hole. The door can now be opened and as normal.

Changing the light globe

The light globe is located behind the glass cover and is a screw-in type.

To change a light globe:

1- Gently lever out the glass cover only.

2- Pull the light globe and push in a replacement globe.

3- Replace the glass cover making sure it fits correctly into place.

NOTE:

Recommended globe: Halogen 25W

Image 20
Contents User’s Manual Contents Installation check and warnings Accessories Using the appliance for the first timePower on BurningElectronic Programmer Operation Setting the time on the 24 hour clockImportant Note for NEW Installation and First Operation Manual cooking Adjusting the tone of the electronic timer alarmBased on setting a cook stop time Fully automatic Start Later Stop Later Canceling automatic settings To cancel a programSafety Thermostat Ceramic Cooktop Control Panel Ceramic Cooktop ControlsCeramic Cooktop Functions Switching onCleaning Oven Functions & Control Panel Preheating HintFoods Suitable Type of PoultryType of Fish Cuts of Fish Steam Clean PizzaConventional Oven FAN Forced Convection most commonly used function Classic Bake bottom of double ovenHigh Bake FAN Grill Fan grill guideFull Grill & Half Grill DefrostCleaning and Maintenance Cleaning and maintenanceCare for stainless steel Only place cookware on oven shelvesRecommended cleaners Drop Down Grilling Element Removing oven door pull down door models onlyTo re-fit the oven door Changing the light globeTrouble Shooting Guide Installation instructionsSymptom Remedy Information for the InstallerOven Measurements MeasurementsElectrical Loads Electrical wiring diagrams and instructionsVoltage supply connection To connect the electrical supply Page Page Warranty Showroom

3007VNM-M specifications

The AEG 3007VNM-M is a high-performance vacuum cleaner that is specifically designed for busy households seeking powerful cleaning capabilities combined with modern technology. This model stands out with its impressive features and benefits that make cleaning more efficient and user-friendly.

One of the key characteristics of the AEG 3007VNM-M is its compact design, allowing for easy maneuverability and storage. Weighing in at a lightweight yet durable construction, this vacuum is perfect for tackling everyday dirt and debris without causing fatigue during use. The elegant design is not just visually appealing but is also functional, making it a popular choice among users.

The AEG 3007VNM-M incorporates advanced cyclonic technology, which helps to separate dirt and dust from the airflow, providing powerful suction that does not diminish during use. This ensures that dust and allergens are effectively captured and locked away, promoting a healthier living environment. Additionally, the multi-cyclonic system means that users do not have to worry about regular filter maintenance, leading to easier upkeep.

Equipped with a HEPA filter, the AEG 3007VNM-M is a superb choice for allergy sufferers. The HEPA filtration captures 99.97% of particles as small as 0.3 microns, ensuring that even the tiniest allergens are removed from the air. This is particularly beneficial in households with pets or young children, where maintaining a clean environment is of utmost importance.

Another standout feature is the versatility of the vacuum's attachments. The AEG 3007VNM-M comes with a range of tools designed for different surfaces, including a motorized brush for carpets, a hard floor nozzle, and dusting brushes for delicate surfaces. This ensures that users can transition from one room to another seamlessly, achieving thorough cleaning on carpets, hardwood floors, and upholstery without needing multiple devices.

Furthermore, the vacuum cleaner features adjustable suction control, allowing users to customize the suction power according to the specific cleaning task at hand. This not only enhances performance but also ensures efficient energy use.

In summary, the AEG 3007VNM-M is an exceptional vacuum cleaner that combines powerful suction, innovative technologies, and practical design features. With its advanced filtration system, versatility in attachments, and user-friendly design, it is an excellent investment for anyone looking for a reliable cleaning solution for their home.