Ryobi Outdoor BGH826 warranty Unpacking, Loose Parts List, Tools Needed

UNPACKING

■Carefully remove all parts from the shipping carton.

■Lift the bench grinder from the carton and place it on a level work surface.

■Do not discard the packing materials until you have care- fully inspected the machine, identified all loose parts, and satisfactorily operated your bench grinder.

■Examine all parts to make sure no breakage or damage has occurred during shipping.

■If all parts have been included, proceed to assembly.

■If any parts are damaged or missing, do not attempt to

plug in this tool or turn it on until the damaged or missing parts are obtained and installed correctly.

■Contact your nearest Ryobi dealer or call 1-800-525-2579 in the United States or 1-800-265-6778 in Canada for assistance if any parts are missing or damaged.

WARNING:

If any parts are missing do not operate this machine until the missing parts are replaced. Failure to do so could result in possible serious injury.

LOOSE PARTS LIST

LOOSE PARTS LIST

The following items are included with your Bench Grinder:
■ Shield Rods – one left, one right	2	■ Washers (5 mm)	2
■ Shield Rod Brackets with Hardware	2	■ Washers (8 mm)	2
■ Safety Shields	2	■ Phillips Screws (5 mm x 8)	2
■ Spark Deflectors	2	■ Hex Bolts (8 mm x 14)	2
■ Work Rests – one left, one right	2	■ Hex Bolts (5 mm x 10)	2
■ Lock Washers (5 mm)	2	■ Operator's Manual

TOOLS NEEDED
The following tools (not included) are needed for assembly and alignment:
7 mm, 10 mm, and 12 mm	PHILLIPS SCREWDRIVER
COMBINATION WRENCH

ADJUSTABLE WRENCH

Fig. 2

Page 7