RULES FOR SAFE OPERATION
Safe operation of this power tool requires that you read and understand this operator's manual and all labels affixed to the tool. Safety is a combination of common sense, staying alert, and knowing how your bench grinder works.
READ ALL INSTRUCTIONS
■KNOW YOUR POWER TOOL. Read the operator's manual carefully. Learn the applications and limitations as well as specific potential hazards related to this tool.
■GUARD AGAINST ELECTRICAL SHOCK by preventing body contact with grounded surfaces. For example: pipes, radiators, ranges, refrigerator enclosures.
■KEEP GUARDS IN PLACE and in working order. Never operate the tool with any guard or cover removed. Make sure all guards are operating properly before each use.
■REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see keys and adjusting wrenches are removed from tool before turning it on.
■KEEP THE WORK AREA CLEAN. Cluttered work areas and work benches invite accidents.
■AVOID DANGEROUS ENVIRONMENTS. Do not use power tools near gasoline or other flammable liquids, in damp or wet locations or expose them to rain. Keep work area well lighted.
■KEEP CHILDREN AND VISITORS AWAY. All visitors should wear safety glasses and be kept a safe distance from work area.
■MAKE WORKSHOP CHILDPROOF with padlocks, master switches, or by removing starter keys.
■DON’T FORCE THE TOOL. It will do the job better and safer at the rate for which it was designed.
■USE THE RIGHT TOOL. Do not force the tool or attachment to do a job for which it was not designed.
■USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. A wire gage size (A.W.G.) of at least 16 is recommended for an extension cord 25 feet or less in length. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.
■INSPECT EXTENSION CORDS PERIODICALLY and replace if damaged.
■WEAR PROPER APPAREL. Do not wear loose clothing, neckties, or jewelry that can get caught in the tool’s moving parts and cause personal injury. Nonslip footwear is recommended when working outdoors. Wear protective hair covering to contain long hair.
■ALWAYS WEAR SAFETY GLASSES WITH SIDE SHIELDS. Everyday eyeglasses have only impact- resistant lenses; they are NOT safety glasses.
■PROTECT YOUR LUNGS. Wear a face or dust mask if the grinding operation is dusty.
■PROTECT YOUR HEARING. Wear hearing protection during extended periods of operation.
■DON’T ABUSE CORD. Never carry tool by the cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges.
■DO NOT OVERREACH. Keep proper footing and balance at all times.
■MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.
■NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Disconnect all tools when not in use, before servicing, or when changing attachments, wheels, etc.
■AVOID ACCIDENTAL STARTING. Be sure switch is off when plugging in.
■USE RECOMMENDED ACCESSORIES. The use of improper accessories may cause risk of injury.
■USE ONLY GRINDING WHEELS that comply with ANSI B7.1 and rated greater than 3600 RPM.
■DO NOT use wheels with incorrect size holes. NEVER use wheel washers or wheel screws that are defective or incorrect and NEVER touch grinding wheel or other mov- ing parts.
■NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the wheel is unintentionally contacted.
■DIRECTION OF FEED. Be aware of wheel rotation direction; never grind without the workrest being properly set. NEVER grind more than one workpiece at a time.
WARNING: Wheel coasts after turn off.
■CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged must be properly repaired or replaced by an authorized service center to avoid risk of personal injury.
■KEEP TOOL DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning. Never use brake fluids, gasoline,
■INSPECT TOOL CORDS AND EXTENSION CORDS PERIODICALLY and, if damaged, have repaired by a qualified service technician. Stay constantly aware of cord location and keep it well away from the rotating wheel.
■NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal sparking of the motor or sparking from grinding metal could ignite fumes.
■USE OUTDOOR EXTENSION CORDS. Use only extension cords with approved ground connection that are intended for use outdoors and so marked.
Page 3
