SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
Conversion to Propane
This appliance is supplied set for Natural gas. A conversion kit for Propane gas is supplied with the range.
If the appliance is to be converted this must be done before installation. The conversion must be performed by a qualified LP gas installer.
After conversion the installation must comply with the relevant regulations and also the local electricity supply company requirements. Read the instructions before converting this appliance.
Failure to convert the appliance correctly could invalidate any warranty or liability claims and lead to prosecution.
This instruction must be used in conjunction with the rest of the appliance instruction, in particular for information on Standards, range positioning, connection hose suitability etc.
When servicing or replacing
Orifices
Standard burner | Wok burner |
A orifice, B internal injector, C external injector
Remove burner caps and heads. Remove old orifices, save the orifices removed from the appliance for future use. Fit new orifices. Reassemble in reverse order.
Orifices | Natural Gas | Propane Gas | ||
Wok burner | internal | 110 | internal | 71 |
| external | 166 | external | 93 |
Large Burner |
| 170 |
| 106 |
Medium Burners |
| 150 |
| 84 |
Small Burner |
| 107 |
| 61 |
Valve adjustment
Pull off all the control knobs.
New Picture
Open the oven doors and remove the fixing screws underneath the control panel.
Lower control panel clear. Unscrew the tap bypass screw.
A valve bypass screw
Using a pair of long nose pliers carefully remove the bypass screw and fit the correct replacement screw. Tighten the screw down.
Save the screws removed from the appliance for possible future use.
Valve Bypass screws
| Natural Gas | Propane Gas |
Wok burner | 82 | 49 |
Large Burner | 70 | 38 |
Medium Burners | 53 | 31 |
Small Burner | 43 | 22 |
Gas Regulator
Remove the storage drawer. Pull it out to its furthest point.